Rechercher une page de manuel
SbBox2s.3coin2
Langue: en
Version: 373133 (fedora - 01/12/10)
Section: 3 (Bibliothèques de fonctions)
Sommaire
- NAME
- SYNOPSIS
- Detailed Description
- Constructor & Destructor Documentation
- SbBox2s::SbBox2s (void)The default constructor makes an empty box.
- SbBox2s::SbBox2s (short xmin, short ymin, short xmax, short ymax)Constructs a box with the given corner coordinates.
- SbBox2s::SbBox2s (const SbVec2s & boxmin, const SbVec2s & boxmax)Constructs a box with the given corners.
- SbBox2s::SbBox2s (const SbBox2i32 & box) [inline, explicit]Constructs a box with coordinates from box, converting the coordinates to short integers
- SbBox2s::SbBox2s (const SbBox2f & box) [inline, explicit]Constructs a box with coordinates from box, converting the coordinates to short integers
- SbBox2s::SbBox2s (const SbBox2d & box) [inline, explicit]Constructs a box with coordinates from box, converting the coordinates to short integers
- SbBox2s::~SbBox2s (void)Default destructor does nothing.
- Member Function Documentation
- void SbBox2s::setBounds (short xmin, short ymin, short xmax, short ymax)Reset the boundaries of the box.
- void SbBox2s::setBounds (const SbVec2s & boxmin, const SbVec2s & boxmax)Reset the boundaries of the box with the given corners.
- SbBox2s & SbBox2s::setBounds (const SbBox2i32 & box)Reset the boundaries with the boundaries of the given box.
- SbBox2s & SbBox2s::setBounds (const SbBox2f & box)Reset the boundaries with the boundaries of the given box.
- SbBox2s & SbBox2s::setBounds (const SbBox2d & box)Reset the boundaries with the boundaries of the given box.
- void SbBox2s::getBounds (short & xmin, short & ymin, short & xmax, short & ymax) constReturns the box boundary coordinates.
- void SbBox2s::getBounds (SbVec2s & boxmin, SbVec2s & boxmax) constReturns the box corner points.
- const SbVec2s & SbBox2s::getMin (void) constReturns the minimum point. This should usually be the lower left corner point of the box.
- SbVec2s & SbBox2s::getMin (void) [inline]Returns the lower left corner of the box.
- const SbVec2s & SbBox2s::getMax (void) constReturns the maximum point. This should usually be the upper right corner point of the box.
- SbVec2s & SbBox2s::getMax (void) [inline]Returns the upper right corner of the box.
- void SbBox2s::extendBy (const SbVec2s & point)Extend the boundaries of the box by the given point, i.e. make the point fit inside the box if it isn't already within it.
- void SbBox2s::extendBy (const SbBox2s & box)Extend the boundaries of the box by the given box parameter. This is equal to calling extendBy() twice with the corner points.
- void SbBox2s::makeEmpty (void)Marks this as an empty box.
- SbBool SbBox2s::isEmpty (void) const [inline]Check if this has been marked as an empty box.
- SbBool SbBox2s::hasArea (void) constCheck if the box has 'positive' area, i.e. the lower left corner is actually lower and more to the left than the other corner point.
- SbBool SbBox2s::intersect (const SbVec2s & point) constCheck if the given point lies within the boundaries of this box.
- SbBool SbBox2s::intersect (const SbBox2s & box) constCheck if box lies wholly or partly within the boundaries of this box.
- SbVec2f SbBox2s::getCenter (void) const [inline]Returns the center point of the box.
- void SbBox2s::getOrigin (short & originX, short & originY) constReturns the coordinates of the box origin (i.e. the lower left corner).
- void SbBox2s::getSize (short & sizeX, short & sizeY) constReturns width and height of box.
- float SbBox2s::getAspectRatio (void) constReturns aspect ratio of box, which is defined as box width divided on box height.
- Friends And Related Function Documentation
- Author
NAME
SbBox2s -The SbBox2s class is a 2 dimensional box with short integer coordinates.
This box class is used by other classes in Coin for data exchange. It provides storage for two box corners with short integer coordinates, which is among other things useful for representing screen or canvas areas in absolute window coordinates.
SYNOPSIS
#include <Inventor/SbBox.h>
Public Member Functions
SbBox2s (void)
SbBox2s (short xmin, short ymin, short xmax, short ymax)
SbBox2s (const SbVec2s &boxmin, const SbVec2s &boxmax)
SbBox2s (const SbBox2i32 &box)
SbBox2s (const SbBox2f &box)
SbBox2s (const SbBox2d &box)
~SbBox2s (void)
void setBounds (short xmin, short ymin, short xmax, short ymax)
void setBounds (const SbVec2s &boxmin, const SbVec2s &boxmax)
SbBox2s & setBounds (const SbBox2i32 &box)
SbBox2s & setBounds (const SbBox2f &box)
SbBox2s & setBounds (const SbBox2d &box)
void getBounds (short &xmin, short &ymin, short &xmax, short &ymax) const
void getBounds (SbVec2s &boxmin, SbVec2s &boxmax) const
const SbVec2s & getMin (void) const
SbVec2s & getMin (void)
const SbVec2s & getMax (void) const
SbVec2s & getMax (void)
void extendBy (const SbVec2s &point)
void extendBy (const SbBox2s &box)
void makeEmpty (void)
SbBool isEmpty (void) const
SbBool hasArea (void) const
SbBool intersect (const SbVec2s &point) const
SbBool intersect (const SbBox2s &box) const
SbVec2f getCenter (void) const
void getOrigin (short &originX, short &originY) const
void getSize (short &sizeX, short &sizeY) const
float getAspectRatio (void) const
Friends
int operator== (const SbBox2s &b1, const SbBox2s &b2)
int operator!= (const SbBox2s &b1, const SbBox2s &b2)
Detailed Description
The SbBox2s class is a 2 dimensional box with short integer coordinates.
This box class is used by other classes in Coin for data exchange. It provides storage for two box corners with short integer coordinates, which is among other things useful for representing screen or canvas areas in absolute window coordinates.
See also:
- SbBox2d, SbBox2f, SbBox2i32, SbBox3d, SbBox3f, SbBox3i32, SbBox3s, SbXfBox3d, SbXfBox3f
Constructor & Destructor Documentation
SbBox2s::SbBox2s (void)The default constructor makes an empty box.
References makeEmpty().
SbBox2s::SbBox2s (short xmin, short ymin, short xmax, short ymax)Constructs a box with the given corner coordinates.
xmin should be less than xmax and ymin should be less than ymax if you want to make a valid box.
References setBounds().
SbBox2s::SbBox2s (const SbVec2s & boxmin, const SbVec2s & boxmax)Constructs a box with the given corners.
The coordinates of min should be less than the coordinates of max if you want to make a valid box.
References setBounds().
SbBox2s::SbBox2s (const SbBox2i32 & box) [inline, explicit]Constructs a box with coordinates from box, converting the coordinates to short integers
Since:
- Coin-2.5
SbBox2s::SbBox2s (const SbBox2f & box) [inline, explicit]Constructs a box with coordinates from box, converting the coordinates to short integers
Since:
- Coin-2.5
SbBox2s::SbBox2s (const SbBox2d & box) [inline, explicit]Constructs a box with coordinates from box, converting the coordinates to short integers
Since:
- Coin-2.5
SbBox2s::~SbBox2s (void)Default destructor does nothing.
Member Function Documentation
void SbBox2s::setBounds (short xmin, short ymin, short xmax, short ymax)Reset the boundaries of the box.
xmin should be less than xmax and ymin should be less than ymax if you want to make a valid box.
See also:
- getBounds().
References SoDebugError::postWarning(), and SbVec2s::setValue().
Referenced by SbBox2s().
void SbBox2s::setBounds (const SbVec2s & boxmin, const SbVec2s & boxmax)Reset the boundaries of the box with the given corners.
The coordinates of min should be less than the coordinates of max if you want to make a valid box.
See also:
- getBounds().
References SoDebugError::postWarning().
SbBox2s & SbBox2s::setBounds (const SbBox2i32 & box)Reset the boundaries with the boundaries of the given box.
Returns reference to self.
Since:
- Coin-2.5
References SbBox2i32::getMax(), SbBox2i32::getMin(), SbBox2i32::isEmpty(), makeEmpty(), and SbVec2s::setValue().
SbBox2s & SbBox2s::setBounds (const SbBox2f & box)Reset the boundaries with the boundaries of the given box.
Returns reference to self.
Since:
- Coin-2.5
References SbBox2f::getMax(), SbBox2f::getMin(), SbBox2f::isEmpty(), makeEmpty(), and SbVec2s::setValue().
SbBox2s & SbBox2s::setBounds (const SbBox2d & box)Reset the boundaries with the boundaries of the given box.
Returns reference to self.
Since:
- Coin-2.5
References SbBox2d::getMax(), SbBox2d::getMin(), SbBox2d::isEmpty(), makeEmpty(), and SbVec2s::setValue().
void SbBox2s::getBounds (short & xmin, short & ymin, short & xmax, short & ymax) constReturns the box boundary coordinates.
See also:
- setBounds(), getMin(), getMax().
void SbBox2s::getBounds (SbVec2s & boxmin, SbVec2s & boxmax) constReturns the box corner points.
See also:
- setBounds(), getMin(), getMax().
const SbVec2s & SbBox2s::getMin (void) constReturns the minimum point. This should usually be the lower left corner point of the box.
See also:
- getOrigin(), getMax().
Referenced by extendBy(), intersect(), SbBox2i32::setBounds(), SbBox2f::setBounds(), and SbBox2d::setBounds().
SbVec2s & SbBox2s::getMin (void) [inline]Returns the lower left corner of the box.
Since:
- Coin-2.5
const SbVec2s & SbBox2s::getMax (void) constReturns the maximum point. This should usually be the upper right corner point of the box.
See also:
- getMin().
Referenced by extendBy(), intersect(), SbBox2i32::setBounds(), SbBox2f::setBounds(), and SbBox2d::setBounds().
SbVec2s & SbBox2s::getMax (void) [inline]Returns the upper right corner of the box.
See also:
- getMin().
Since:
- Coin-2.5
void SbBox2s::extendBy (const SbVec2s & point)Extend the boundaries of the box by the given point, i.e. make the point fit inside the box if it isn't already within it.
References SbVec2s::setValue().
Referenced by extendBy().
void SbBox2s::extendBy (const SbBox2s & box)Extend the boundaries of the box by the given box parameter. This is equal to calling extendBy() twice with the corner points.
References extendBy(), getMax(), getMin(), and SoDebugError::postWarning().
void SbBox2s::makeEmpty (void)Marks this as an empty box.
See also:
- isEmpty().
References SbVec2s::setValue().
Referenced by SbBox2s(), and setBounds().
SbBool SbBox2s::isEmpty (void) const [inline]Check if this has been marked as an empty box.
See also:
- makeEmpty().
Since:
- Coin-2.5
Referenced by SbBox2i32::setBounds(), SbBox2f::setBounds(), and SbBox2d::setBounds().
SbBool SbBox2s::hasArea (void) constCheck if the box has 'positive' area, i.e. the lower left corner is actually lower and more to the left than the other corner point.
Since:
- Coin-2.5
SbBool SbBox2s::intersect (const SbVec2s & point) constCheck if the given point lies within the boundaries of this box.
SbBool SbBox2s::intersect (const SbBox2s & box) constCheck if box lies wholly or partly within the boundaries of this box.
References getMax(), and getMin().
SbVec2f SbBox2s::getCenter (void) const [inline]Returns the center point of the box.
Since:
- Coin-2.5
void SbBox2s::getOrigin (short & originX, short & originY) constReturns the coordinates of the box origin (i.e. the lower left corner).
See also:
- getMin().
void SbBox2s::getSize (short & sizeX, short & sizeY) constReturns width and height of box.
References SoDebugError::postWarning().
float SbBox2s::getAspectRatio (void) constReturns aspect ratio of box, which is defined as box width divided on box height.
References SoDebugError::postWarning().
Friends And Related Function Documentation
int operator== (const SbBox2s & b1, const SbBox2s & b2) [friend]Check b1 and b2 for equality.
Compare matrices to see if they are equal. For two matrices to be equal, all their individual elements must be equal.
See also:
- equals().
Check the two given planes for equality.
Check if the two rotations are equal.
See also:
- equals().
Equality operator. Check if the strings have the same contents.
Returns 1 if v1 and v2 are equal, 0 otherwise.
Returns 1 if v1 and v2 are equal, 0 otherwise.
See also:
- equals().
Returns 1 if v1 and v2 are exactly equal, 0 otherwise.
Returns 1 if v1 and v2 are exactly equal, 0 otherwise.
See also:
- equals().
Compares two SbViewportRegion instances for equality.
int operator!= (const SbBox2s & b1, const SbBox2s & b2) [friend]Check b1 and b2 for inequality.
Compare matrices to see if they are not equal. For two matrices to not be equal, it is enough that at least one of their elements are unequal.
See also:
- equals().
Check the two given planes for unequality.
Check if the two rotations are unequal.
See also:
- equals().
Inequality operator.
Returns 1 if v1 and v2 are not equal, 0 if they are equal.
Returns 1 if v1 and v2 are not equal, 0 if they are equal.
See also:
- equals().
Compares two SbViewportRegion instances for inequality.
Since:
- Coin 2.4
Author
Generated automatically by Doxygen for Coin from the source code.
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre