Rechercher une page de manuel

Chercher une autre page de manuel:

atari800.sdl

Langue: en

Autres versions - même langue

Version: 314741 (ubuntu - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

atari800 - Atari 800 Emulator, Version 2.0.3

SYNOPSIS

atari800 [options] [files...]

DESCRIPTION

atari800 emulates the Atari 800, Atari 800 XL, Atari 130 XE and Atari 5200 Games System.

Options

-help
Print complete and up-to-date list of command line switches
-v
Print emulator version
-verbose
Display framerate when exiting
-config filename
Specify an alternative configuration filename
-osa_rom filename
Path to file containing Atari Rev.A Operating System. Used to override paths defined at compile time.
-osb_rom filename
Path to file containing Atari Rev.B Operating System. Used to override paths defined at compile time.
-xlxe_rom filename
Path to file containing Atari XL/XE Operating System. Used to override paths defined at compile time.
-5200_rom filename
Path to file containing Atari 5200 Games System ROM. Used to override paths defined at compile time.
-basic_rom filename
Path to file containing Atari BASIC ROM. Used to override paths defined at compile time.
-atari
Emulate Atari 800
-xl
Emulate Atari 800 XL
-xe
Emulate Atari 130 XE
-320xe
Emulate Atari 320 XE (Compy Shop)
-rambo
Emulate Atari 320 XE (Rambo)
-5200
Emulate Atari 5200
-emuos
Use EmuOS
-a
Use Atari OS/A for Atari 800
-b
Use Atari OS/B for Atari 800
-c
Enable RAM between 0xc000 and 0xcfff in Atari 800
-pal
Emulate PAL TV mode
-ntsc
Emulate NTSC TV mode
-nobasic
Used to disable Basic when starting the emulator in XL/XE mode. Simulates the Option key being held down during system boot.
-basic
Turn on Atari BASIC ROM
-cart <filename>
Insert cartridge (CART or raw format)
-run <filename>
Run Atari program (EXE, COM, XEX, BAS, LST)
-state <filename>
Load saved-state file
-tape <filename>
Attach cassette image (CAS format or raw file)
-boottape <filename>
Attach cassette image and boot it
-nopatch
Normally the OS is patched giving very fast I/O. This options prevents the patch from being applied so that the OS accesses the serial port hardware directly. This option will probably never be needed since programs that access the serial hardware should work even if the OS has been patched.
-nopatchall
Don't patch OS at all, H: and P: devices won't work
-H1 <path>
Set path for H1: device
-H2 <path>
Set path for H2: device
-H3 <path>
Set path for H3: device
-H4 <path>
Set path for H4: device
-Hpath <path>
Set path for Atari executables on the H: device
-hreadonly
Enable read-only mode for H: device
-hreadwrite
Disable read-only mode for H: device
-devbug
Put debugging messages for H: and P: devices in log file
-rtime
Enable R-Time 8 emulation
-nortime
Disable R-Time 8 emulation
-mouse off
Do not use mouse
-mouse pad
Emulate paddles
-mouse touch
Emulate Atari Touch Tablet
-mouse koala
Emulate Koala Pad
-mouse pen
Emulate Light Pen
-mouse gun
Emulate Light Gun
-mouse amiga
Emulate Amiga mouse
-mouse st
Emulate Atari ST mouse
-mouse trak
Emulate Atari Trak-Ball
-mouse joy
Emulate joystick using mouse
-mouseport <num>
Set mouse port 1-4 (default 1)
-mousespeed <num>
Set mouse speed 1-9 (default 3)
-multijoy
Emulate MultiJoy4 interface
-refresh
Controls screen refresh rate. A numerical value follows this option which specifies how many emulated screen updates are required before the actual screen is updated. This value effects the speed of the emulation: A higher value results in faster CPU emulation but a less frequently updated screen.
-artif <mode>
Set artifacting mode 0-4 (0 = disable)
-palette <filename>
Read Atari colors from ACT file
-black <num>
Set black level 0-255
-while <num>
Set white level 0-255
-colors <num>
Set color intensity
-genpal
Generate artifical palette
-colshift <num>
Set color shift (-genpal only)
-screenshots <pattern>
Set filename pattern for screenshots. Use to override the default atari000.png, atari001.png etc. filenames. Hashes are replaced with raising numbers. Existing files are overwritten only if all the files defined by the pattern exist.
-sound
Enable sound
-nosound
Disable sound
-dsprate <freq>
Set mixing frequency (Hz)
-snddelay <time>
Set sound delay (milliseconds)
 

Curses Options

-left
Use columns 0 to 39
-central
Use columns 20 to 59
-right
Use columns 40 to 79
-wide1
Use columns 0 to 79. In this mode only the even character positions are used. The odd locations are filled with spaces.
-wide2
Use columns 0 to 79. This mode is similar to -wide1 except that the spaces are in reverse video if the previous character was also in reverse video.

DOS/VGA Options

-interlace
Generate screen with interlace
-video <mode>
0=320x200, 1=320x240, 2=320x480 interlaced with black lines, 3=320x480 interlaced with darker lines
-novesa
Do not use VESA 2 video modes
-vretrace
Use vertical retrace control
-LPTjoy1
Read joystick connected to LPT1
-LPTjoy2
Read joystick connected to LPT2
-LPTjoy3
Read joystick connected to LPT3
-joyswap
Swap joysticks
-keyboard 0
PC keyboard layout
-keyboard 1
Atari keyboard layout
 

Falcon Options

-interlace <x>
Generate Falcon screen only every x frame
-videl
Direct VIDEL programming (Falcon/VGA only)
-double
Double the screen size on NOVA
-delta
Delta screen output (differences only)
 

SDL Options

-fullscreen
Start in fullscreen mode (tries to switch to 336x240 resolution)
-windowed
Start in a window (does not change your working resolution)
-rotate90
Run the emulator with rotated display (useful for devices with 240x320 screen)
-width number-of-pixels
Host horizontal resolution for fullscreen
-height number-of-pixels
Host vertical resolution for fullscreen
-bpp number-of-bits
Host color depth for running in fullscreen
-audio16
Enable 16-bit sound output
-nojoystick
Do not initialize SDL joysticks
-joy0 path-to-device
Define path to device used in LPTjoy 0. Available on linux-ia32 only.
-joy1 path-to-device
Define path to device used in LPTjoy 1. Available on linux-ia32 only.
 

SVGALIB Options

-interlace
Enable screen interlace option
 

X11 Options

-small
Run the emulator in a small window where each Atari 800 pixel is represented by one X Window pixel
-large
Runs the emulator in a large window where each Atari 800 pixel is represented by a 2x2 X Window rectange. This mode is selected by default.
-huge
Runs the emulator in a huge window where each Atari 800 pixel is represented by a 3x3 X Window rectange
-clip_x number-of-pixels
Set left offset for clipping
-clip_width number-of-pixels
Set the width of the clipping-area
-clip_y number-of-pixels
Set top offset for clipping
-clip_height number-of-pixels
Set the height of the clipping-area
-private_cmap
Use private colormap
-fps
Show framerate
-sio
Show SIO monitor
-x11bug
Enable debug code in atari_x11.c
-keypad
Keypad mode
 

KEYBOARD, JOYSTICK AND OTHER CONTROLLERS

F1
Built in user interface
F2
Option key
F3
Select key
F4
Start key
F5
Reset key ("warm reset")
Shift+F5
Reboot ("cold reset")
F6
Help key (XL/XE only)
F7
Break key
F8
Enter monitor
F9
Exit emulator
F10
Save screenshot
Shift+F10
Save interlaced screenshot
Alt+R
Run Atari program
Alt+D
Disk management
Alt+C
Cartridge management
Alt+Y
Select system
Alt+O
Sound settings
Alt+W
Sound recording start/stop
Alt+S
Save state file
Alt+L
Load state file
Alt+A
About the emulator

Paddles, Atari touch tablet, Koala pad, light pen, light gun, ST/Amiga mouse, Atari trak-ball, joystick and Atari 5200 analog controller are emulated using mouse on ports that support it. See the options above for how to enable mouse.

 

Curses

F10 (Save screenshot) does not work in the default CURSES_BASIC build. Shift+F5 and Shift+F10 don't work at all. Avoid Ctrl + C, H, J, M, Q, S and Z. The remaining control characters can be typed. Control characters are displayed on the screen with the associated upper case character in bold.

Controllers not supported in this version.

DOS/VGA

F7
Switch between Emulated joysticks mode and Normal keyboard
`
Atari/Inverse key

Joysticks can be either real one connected to game port, or old 8-bit digital CX-40 joysticks connected to parallel port or keyboard joysticks (try out JOYCFG.EXE).

 

Falcon

Help
Help key (XL/XE)

Joystick 0 is operated by the numeric keypad (make sure that the numeric keypad has been enabled).


        7 8 9
         \|/
        4 5 6
         /|\
        1 2 3


        And 0 is the fire key.

Mouse not supported in this version.

 

SDL

LAlt+F
Switch fullscreen (probably doesn't work in Windows)
LAlt+G
Switch WIDTH_MODE (so you can set 320x240)
LAlt+B
Switch BLACK-AND-WHITE
LAlt+J
Swap keyboard_emulated joysticks
LAlt+E
Switch bpp (for debug only, will be removed soon)

To redefine keys for joystick emulation you must modify SDL_TRIG_* and SDL_JOY_* in atari_sdl.c, then recompile Atari800. In source you can also turn off sound or change defaults (FULLSCREEN, BW, SWAP_JOYSTICKS, WIDTH_MODE).

On Linux, standard joysticks are supported.

 

SVGALIB

F11
Joystick autofire on/off
`
Caps key

The Ctrl+Shift keyboard combinations are implemented using the left Alt key.

Joystick 0 is operated by the numeric keypad (make sure that the numeric keypad has been enabled).


        7 8 9
         \|/
        4 5 6
         /|\
        1 2 3


        And 0 is the fire key.

Mouse not supported in this version.

 

X11

Alt
Atari key (either Alt key will work)

Joystick 0 is operated by the mouse position relative to the center of the screen. The mouse button acts as the trigger. On Linux, standard joysticks are also supported.

 

FILES

/usr/share/atari800/ATARIOSA.ROM
Atari O/S A
/usr/share/atari800/ATARIOSB.ROM
Atari O/S B
/usr/share/atari800/ATARIXL.ROM
Atari 800 XL O/S
/usr/share/atari800/ATARI5200.ROM
Atari 5200 O/S
/usr/share/atari800/ATARIBAS.ROM
Atari Basic

BUGS

See the BUGS file.
Trois Anneaux pour les Rois Elfes sous le ciel,
Sept pour les Seigneurs Nains dans leurs demeures de pierre,
Neuf pour les Hommes Mortels destinés au trépas,
Un pour le Seigneur des Ténèbres sur son sombre trône
Dans le pays de Mordor où s'étendent les Ombres.
Un Anneau pour les gouverner tous, Un Anneau pour les trouver,
Un Anneau pour les amener tous et dans les ténèbres les lier
Au Pays de Mordor où s'étendent les Ombres.