Rechercher une page de manuel
dvblast
Langue: en
Version: 334474 (ubuntu - 24/10/10)
Section: 1 (Commandes utilisateur)
NAME
DVBlast - Simple and powerful dvb streaming applicationSYNOPSIS
dvblast [-q] -c <config_file> [-r <remote_socket>] [-t <ttl>] [-o <SSRC_IP>] [-i <RT_priority>] [-a <adapter>] [-n <frontend number>] [-S <diseqc>] -f <frequency> [-s <symbol_rate>] [-v <0|13|18>] [-p] [-b <bandwidth>] [-m <modulation] [-u] [-W] [-U] [-d <dest_IP:port>] [-e] [-T]DESCRIPTION
DVBlast is a simple and powerful streaming application based on the linux-dvb API. It opens a DVB device, tunes it, places PID filters, configures a CAM module, and demultiplexes the packets to several RTP outputs.DVBlast is designed to be the core of a custom IRD or CID, based on a PC with Linux-supported DVB cards.
DVBlast does not do any kind of processing on the elementary streams, such as transcoding, PID remapping or remultiplexing. it does not stream from plain files, only DVB devices. If you were looking for these features, switch to VLC.
OPTIONS
- -a, --adapter <adapter>
- Address of the adapter
- -A, --asi-adapter
- Read packets from an ASI adapter (0-n)
- -b, --bandwidth <bandwidth>
- Frontend bandwidth
- -c, --config-file <config file>
- Use the given configuration file
- -d, --duplicate <dest IP:port>
- Duplicate all received packets to a given destination
- -D, --rtp-input
- Read packets from a multicast address instead of a DVB card
- -e, --epg-passthrough
- Enable EPG pass through (EIT data)
- -f, --frequency <frequency>
- Frontend frequency
- -h, --help
- Print the help message
- -i, --priority <RT priority>
- Real time priority
- -m, --modulation
- Modulation
DVB-C qpsk|qam_16|qam_32|qam_64|qam_128|qam_256 (default qam_auto)
DVB-T qam_16|qam_32|qam_64|qam_128|qam_256 (default qam_auto)
DVB-S2 qpsk|psk_8 (default legacy DVB-S) - -n, --frontend-number <frontend number>
- THe frontend number
- -o, --rtp-output <SSRC IP>
- RTP output IP
- -p, --force-pulse
- Force 22kHz pulses for high-band selection (DVB-S)
- -q
- Be quiet (less verbosity, repeat or use number for even quieter)
- -r, --remote-socket <remote socket>
- Remote socket to use
- -s, --symbole-rate <symbol rate>
- Symbole rate
- -S, --diseqc <diseqc>
- Satellite number for diseqc (0: no diseqc, 1-4, A or B)
- -t, --ttl <ttl>
- Time-To-Live of the multicast stream
- -T, --unique-ts-id
- Generate unique TS ID for each program
- -u, --budget-mode
- Turn on budget mode (no hardware PID filtering)
- -U, --udp
- Use raw UDP rather than RTP (required by some IPTV set top boxes)
- -v, --voltage <0|13|18>
- Voltage to apply to the LNB (QPSK)
- -V, --version
- Only display the version
- -W, --slow-cam
- Add extra delays for slow CAMs
SEE ALSO
Read the README file for more information about the configuration of dvblast.AUTHORS
Writen by Marian Ďurkovič, Andy Gatward and Christophe MassiotLICENCE
This program is free software; you can redistribute it and/or modify it under the terms of version 2 of the GNU General Public License as published by the Free Software Foundation.Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre