gpgconf

NAME

gpgconf - Modify .gnupg home directories

SYNOPSIS

gpgconf [options] --list-components
gpgconf [options] --list-options component
gpgconf [options] --change-options component

DESCRIPTION

The gpgconf is a utility to automatically and reasonable safely query and modify configuration files in the `.gnupg' home directory. It is designed not to be invoked manually by the user, but automatically by graphical user interfaces (GUI). ([Please note that currently no locking is done, so concurrent access should be avoided. There are some precautions to avoid corruption with concurrent usage, but results may be inconsistent and some changes may get lost. The stateless design makes it difficult to provide more guarantees.])

gpgconf provides access to the configuration of one or more components of the GnuPG system. These components correspond more or less to the programs that exist in the GnuPG framework, like GnuPG, GPGSM, DirMngr, etc. But this is not a strict one-to-one relationship. Not all configuration options are available through gpgconf. gpgconf provides a generic and abstract method to access the most important configuration options that can feasibly be controlled via such a mechanism.

gpgconf can be used to gather and change the options available in each component, and can also provide their default values. gpgconf will give detailed type information that can be used to restrict the user's input without making an attempt to commit the changes.

gpgconf provides the backend of a configuration editor. The configuration editor would usually be a graphical user interface program, that allows to display the current options, their default values, and allows the user to make changes to the options. These changes can then be made active with gpgconf again. Such a program that uses gpgconf in this way will be called GUI throughout this section.

COMMANDS

One of the following commands must be given:
--list-components
List all components. This is the default command used if none is specified.
--list-options component
List all options of the component component.
--change-options component
Change the options of the component component.
--apply-defaults
Update all configuration files with values taken from the global configuration file (usually `/etc/gnupg/gpgconf.conf').
--check-config [filename]
Run a syntax check ion the global configuration file. If filename is given, check that file instead.

OPTIONS

The following options may be used:

-v
--verbose
Outputs additional information while running. Specifically, this extends numerical field values by human-readable descriptions.
-r
--runtime
Only used together with --change-options. If one of the modified options can be changed in a running daemon process, signal the running daemon to ask it to reparse its configuration file after changing.

This means that the changes will take effect at run-time, as far as this is possible. Otherwise, they will take effect at the next start of the respective backend programs.

USAGE

The command --list-components will list all components that can be configured with gpgconf. Usually, one component will correspond to one GnuPG-related program and contain the options of that programs configuration file that can be modified using gpgconf. However, this is not necessarily the case. A component might also be a group of selected options from several programs, or contain entirely virtual options that have a special effect rather than changing exactly one option in one configuration file.

A component is a set of configuration options that semantically belong together. Furthermore, several changes to a component can be made in an atomic way with a single operation. The GUI could for example provide a menu with one entry for each component, or a window with one tabulator sheet per component.

The command argument --list-components lists all available components, one per line. The format of each line is:

name:description

name
This field contains a name tag of the component. The name tag is used to specify the component in all communication with gpgconf. The name tag is to be used verbatim. It is thus not in any escaped format.
description
The string in this field contains a human-readable description of the component. It can be displayed to the user of the GUI for informational purposes. It is percent-escaped and localized.

Example:

$ gpgconf --list-components
gpg:GPG for OpenPGP
gpg-agent:GPG Agent
scdaemon:Smartcard Daemon
gpgsm:GPG for S/MIME
dirmngr:Directory Manager

Listing options

 

Every component contains one or more options. Options may be gathered into option groups to allow the GUI to give visual hints to the user about which options are related.

The command argument lists all options (and the groups they belong to) in the component component, one per line. component must be the string in the field name in the output of the --list-components command.

There is one line for each option and each group. First come all options that are not in any group. Then comes a line describing a group. Then come all options that belong into each group. Then comes the next group and so on. There does not need to be any group (and in this case the output will stop after the last non-grouped option).

The format of each line is:

name:flags:level:description:type:alt-type:argname:default:argdef:value

name
This field contains a name tag for the group or option. The name tag is used to specify the group or option in all communication with gpgconf. The name tag is to be used verbatim. It is thus not in any escaped format.
flags
The flags field contains an unsigned number. Its value is the OR-wise combination of the following flag values:
group (1)
If this flag is set, this is a line describing a group and not an option.

The following flag values are only defined for options (that is, if the group flag is not used).

optional arg (2)
If this flag is set, the argument is optional. This is never set for type 0 (none) options.
list (4)
If this flag is set, the option can be given multiple times.
runtime (8)
If this flag is set, the option can be changed at runtime.
default (16)
If this flag is set, a default value is available.
default desc (32)
If this flag is set, a (runtime) default is available. This and the default flag are mutually exclusive.
no arg desc (64)
If this flag is set, and the optional arg flag is set, then the option has a special meaning if no argument is given.
no change (128)
If this flag is set, gpgconf ignores requests to change the value. GUI frontends should grey out this option. Note, that manual changes of the configuration files are still possible.
level
This field is defined for options and for groups. It contains an unsigned number that specifies the expert level under which this group or option should be displayed. The following expert levels are defined for options (they have analogous meaning for groups):
basic (0)
This option should always be offered to the user.
advanced (1)
This option may be offered to advanced users.
expert (2)
This option should only be offered to expert users.
invisible (3)
This option should normally never be displayed, not even to expert users.
internal (4)
This option is for internal use only. Ignore it.

The level of a group will always be the lowest level of all options it contains.

description
This field is defined for options and groups. The string in this field contains a human-readable description of the option or group. It can be displayed to the user of the GUI for informational purposes. It is percent-escaped and localized.
type
This field is only defined for options. It contains an unsigned number that specifies the type of the option's argument, if any. The following types are defined:

Basic types:

none (0)
No argument allowed.
string (1)
An unformatted string.
int32 (2)
A signed number.
uint32 (3)
An unsigned number.

Complex types:

pathname (32)
A string that describes the pathname of a file. The file does not necessarily need to exist.
ldap server (33)
A string that describes an LDAP server in the format:

hostname:port:username:password:base_dn

More types will be added in the future. Please see the alt-type field for information on how to cope with unknown types.

alt-type
This field is identical to type, except that only the types 0 to 31 are allowed. The GUI is expected to present the user the option in the format specified by type. But if the argument type type is not supported by the GUI, it can still display the option in the more generic basic type alt-type. The GUI must support all the defined basic types to be able to display all options. More basic types may be added in future versions. If the GUI encounters a basic type it doesn't support, it should report an error and abort the operation.
argname
This field is only defined for options with an argument type type that is not 0. In this case it may contain a percent-escaped and localised string that gives a short name for the argument. The field may also be empty, though, in which case a short name is not known.
default
This field is defined only for options. Its format is that of an option argument (see: [Format conventions], for details). If the default value is empty, then no default is known. Otherwise, the value specifies the default value for this option. Note that this field is also meaningful if the option itself does not take a real argument.
argdef
This field is defined only for options for which the optional arg flag is set. If the no arg desc flag is not set, its format is that of an option argument (see: [Format conventions], for details). If the default value is empty, then no default is known. Otherwise, the value specifies the default value for this option. If the no arg desc flag is set, the field is either empty or contains a description of the effect of this option if no argument is given. Note that this field is also meaningful if the option itself does not take a real argument.
value
This field is defined only for options. Its format is that of an option argument. If it is empty, then the option is not explicitely set in the current configuration, and the default applies (if any). Otherwise, it contains the current value of the option. Note that this field is also meaningful if the option itself does not take a real argument.

Changing options

 

The command to change the options of the component component to the specified values. component must be the string in the field name in the output of the --list-components command. You have to provide the options that shall be changed in the following format on standard input:

name:flags:new-value

name
This is the name of the option to change. name must be the string in the field name in the output of the --list-options command.
flags
The flags field contains an unsigned number. Its value is the OR-wise combination of the following flag values:
default (16)
If this flag is set, the option is deleted and the default value is used instead (if applicable).
new-value
The new value for the option. This field is only defined if the default flag is not set. The format is that of an option argument. If it is empty (or the field is omitted), the default argument is used (only allowed if the argument is optional for this option). Otherwise, the option will be set to the specified value.

Examples:

To set the force option, which is of basic type none (0):

$ echo 'force:0:1' | gpgconf --change-options dirmngr

To delete the force option:

$ echo 'force:16:' | gpgconf --change-options dirmngr

The --runtime option can influence when the changes take effect.

FILES

/etc/gnupg/gpgconf.conf

  If this file exists, it is processed as a global configuration file.
  A commented example can be found in the `examples' directory of
  the distribution.

SEE ALSO

gpg(1), gpgsm(1), gpg-agent(1), scdaemon(1), dirmngr(1)

The full documentation for this tool is maintained as a Texinfo manual. If GnuPG and the info program are properly installed at your site, the command

info gnupg

should give you access to the complete manual including a menu structure and an index.