gpiv_trig

Langue: en

Autres versions - même langue

Version: 336856 (ubuntu - 24/10/10)

Section: 1 (Commandes utilisateur)

NAME

gpiv_trig - triggers a (double Nd_YAGG) laser with a CCD camera.

SYNOPSIS

gpiv_trig [-h | --help] [-i | --interactive] [-v | --version] [-V | --verbose]

DESCRIPTION

gpiv_trig triggers a CCD camera and a (double Nd_YAGG) laser for Particle Image velocimetry (PIV). The code uses a kernel module gpivtrig_rtl from the gpivtrig package that depends on the Real Time Application Interface (RTAI) and RealtimeLinux. Trigger pulses are send to the parallel port of the PC (/dev/lpt0 or /dev/lpt1; see the configure script of the gpivtrig package) at bins #1 (camera), #2 and #3 (first and second laser respectively). The program may be started directly if all modules have been loaded or by the gpiv_control script, also included in the gpivtrig package, which takes care of the loading and unloading of the needed kernel modules. Currently, gpiv_trig is tested with RTAI-3.1 and the linux kernel-2.4.27.

This program uses the TRIG parameters. The command line options are explained below.

Options

-h | --help
On-line help.
-i | --interactive
Prompt for confirmation.
-v | --version
Print version information on standard output, then exit successfully.
-V | --verbose
program behaves more verbose during operation showing what is going on

SEE ALSO

gpivtools(1), gpiv_control(1), gpiv(1)

AUTHOR

Gerber Van der Graaf