Rechercher une page de manuel

Chercher une autre page de manuel:


Langue: en

Version: August 20, 2006 (debian - 07/07/09)

Section: 1 (Commandes utilisateur)


m16c-flash - Flash programmer for Renesas M16C and R8C microcontrollers


m16c-flash [COM_DEV] [CPU_TYPE] [FILE] [ID1:...:ID7] [OPTIONS]


m16c-flash is a flash programmer for the Renesas M16C and R8C microcontrollers which operates in asynchronous mode.


COM_DEV The serial device to use for flashing, e.g. /dev/ttyS0 or /dev/ttyUSB0.

CPU_TYPE The CPU type you want to flash to (currently M16C or R8C).

FILE The filename of the binary you want to flash.

ID1:...:ID7 The device ID.

--help Show a help text and exit.

--version Show version information and exit.


Flash the simple.s file onto an M16C microcontroller via the first serial port (/dev/ttyS0) using 0:0:0:0:0:0:0 as the device ID:
m16c-flash /dev/ttyS0 M16C simple.s 0:0:0:0:0:0:0

Flash the test.mot file onto an R8C microcontroller via the USB serial device /dev/ttyUSB0, and using ff:ff:ff:ff:ff:ff:ff as device ID:
m16c-flash /dev/ttyUSB0 R8C test.mot ff:ff:ff:ff:ff:ff:ff


Please report any bugs to Thomas Fischl <>.


m16c-flash is covered by the GNU General Public License (GPL).


Greg Reynolds <>
Jim Hawkridge <>
Thomas Fischl <>

This manual page was written by Uwe Hermann <>, for the Debian GNU/Linux system (but may be used by others).

Canis in via,
Ben Hur venit,
Paf canisque.
-+- EL in GFA : Perseverare Diabolicum -+-