acpi_panasonic.4freebsd

Langue: en

Autres versions - même langue

Version: 361990 (ubuntu - 24/10/10)

Section: 4 (Pilotes et protocoles réseau)


BSD mandoc

NAME

acpi_panasonic - ACPI hotkey driver for Panasonic laptops

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file:
device acpi_panasonic

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

 acpi_panasonic_load="YES"
 

DESCRIPTION

The driver enables such hotkey facilities of various Panasonic laptops as changing LCD brightness, controlling mixer volumes, entering sleep or suspended state and so on. On the following models it is reported to work: Let's note (or Toughbook, outside Japan) CF-R1N, CF-R2A and CF-R3. It may also work on other models as well.

The driver consists of three functionalities. The first is to detect hotkey events and take corresponding actions, which include changing LCD luminance and speaker mute state. The second role is to notify occurrences of the event by way of devctl(4) and eventually to devd(8). The third and last is to provide a way to adjust LCD brightness and sound mute state via sysctl(8).

Hotkeys

There are 9 hotkeys available on the supported hardwares:
Fn+F1
Make LCD backlight darker.
Fn+F2
Make LCD backlight brighter.
Fn+F3
Switch video output between LCD and CRT. Not supported by the driver.
Fn+F4
Toggle muting the speaker.
Fn+F5
Turn the mixer volume down.
Fn+F6
Turn the mixer volume up.
Fn+F7
Enter suspend-to-RAM state.
Fn+F9
Show battery status.
Fn+F10
Enter suspend-to-disk state.

Actions are automatically taken within the driver for Fn+F1 , Fn+F2 and Fn+F4 For the other events such as mixer control and showing battery status, devd(8) should take the role as described below.

devd(8)SsEvents

When notified to devd(8), the hotkey event provides the following information:
system
Qq Li ACPI
subsystem
Qq Li Panasonic
type
The source of the event in ACPI namespace. The value depends on the model but typically Qq Li \_SB_.HKEY .
notify
Event code (see below).

Event codes to be generated are assigned as follows:

0x81-0x86, 0x89
Fn+F<n> pressed. 0x81 corresponds to Fn+F1 0x82 corresponds to Fn+F2 and so on.
0x01-0x07, 0x09, 0x1a
Fn+F<n> released. 0x01 corresponds to Fn+F1 0x02 corresponds to Fn+F2 and so on.

SYSCTL VARIABLES

The following MIBs are available:
hw.acpi.panasonic.lcd_brightness_max
The maximum level of brightness. The value is read only and automatically set according to hardware model.
hw.acpi.panasonic.lcd_brightness_min
The minimum level of brightness. The value is read only and automatically set according to hardware model.
hw.acpi.panasonic.lcd_brightness
Current brightness level of the LCD (read-write). The value ranges from hw.acpi.panasonic.lcd_brightness_min to hw.acpi.panasonic.lcd_brightness_max
hw.acpi.panasonic.sound_mute
A read-write boolean flag to control whether to mute the speaker. The value 1 means to mute and 0 not.

SEE ALSO

acpi(4), devd.conf5, devd(8), sysctl(8)

HISTORY

The driver first appeared in Fx 5.3 .

AUTHORS

An -nosplit The driver and this manual page were written by An OGAWA Takaya Aq t-ogawa@triaez.kaisei.org and An TAKAHASHI Yoshihiro Aq nyan@FreeBSD.org .