Rechercher une page de manuel

Chercher une autre page de manuel:

ieee1394.4freebsd

Langue: en

Version: 300480 (debian - 07/07/09)

Section: 4 (Pilotes et protocoles réseau)


BSD mandoc

NAME

firewire - IEEE1394 High-performance Serial Bus

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file:
device firewire

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

 firewire_load="YES"
 

DESCRIPTION

Fx provides machine-independent bus support and raw drivers for interfaces.

The driver consists of two layers: the controller and the bus layer. The controller attaches to a physical bus (like pci(4)). The bus attaches to the controller. Additional drivers can be attached to the bus.

Up to 63 devices, including the host itself, can be attached to a bus. The root node is dynamically assigned with a PHY device function. Also, the other bus specific parameters, e.g., node ID, cycle master, isochronous resource manager and bus manager, are dynamically assigned, after bus reset is initiated. On the bus, every device is identified by an EUI 64 address.

FILES

/dev/fw0.0
/dev/fwmem0.0

SEE ALSO

fwe(4), fwip(4), fwohci(4), pci(4), sbp(4), eui64(5), fwcontrol(8), kldload(8), sysctl(8)

HISTORY

The driver first appeared in Fx 5.0 .

AUTHORS

An -nosplit The driver was written by An Katsushi Kobayashi and An Hidetoshi Shimokawa for the Fx project.

BUGS

See fwohci(4) for security notes.
Les interrelations entre l'algèbre et la géométrie deviennent plus
intelligibles par l'usage des coordonnées.
-+- René Descartes -+-