iwi.4freebsd

Langue: en

Autres versions - même langue

Version: 300409 (debian - 07/07/09)

Section: 4 (Pilotes et protocoles réseau)


BSD mandoc

NAME

iwi - Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:
device iwi device pci device wlan device firmware

Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf5:

 if_iwi_load="YES"
 wlan_load="YES"
 firmware_load="YES"
 

In both cases, place the following lines in loader.conf5 to load the firmware modules:

 iwi_bss_load="YES"
 iwi_ibss_load="YES"
 iwi_monitor_load="YES"
 

DESCRIPTION

The driver provides support for Intel PRO/Wireless 2200BG/2915ABG MiniPCI and 2225BG PCI network adapters.

By default, the driver configures the adapter for BSS operation (aka infrastructure mode). This mode requires the use of an access point.

For more information on configuring this device, see ifconfig(8).

This driver requires firmware to be loaded before it will work. For the loaded firmware to work the license at /usr/share/doc/legal/intel_iwi/LICENSE must be agreed to and the following line be added to loader.conf5:

"legal.intel_iwi.license_ack=1"

FILES

/usr/share/doc/legal/intel_iwi/LICENSE
firmware license

EXAMPLES

Join an existing BSS network (i.e., connect to an access point):
"ifconfig iwi0 inet 192.168.0.20 netmask 0xffffff00"

Join a specific BSS network with network name ``my_net ''

"ifconfig iwi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net"

Join a specific BSS network with 64-bit WEP encryption:

 ifconfig iwi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
     wepmode on wepkey 0x1234567890 weptxkey 1
 

Join a specific BSS network with 128-bit WEP encryption:

 ifconfig iwi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
     wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
 

DIAGNOSTICS

"iwi%d: device timeout"
The driver will reset the hardware. This should not happen.
"iwi%d: firmware error"
The onboard microcontroller crashes for some reason. The driver will reset the hardware. This should not happen.
"iwi%d: timeout waiting for firmware initialization to complete"
The onboard microcontroller failed to initialize in time. This should not happen.
"iwi%d: could not load firmware image '%s'"
The driver failed to load the firmware image using the firmware(9) subsystem. Verify that the necessary firmware modules are loaded and the license agreement loader(8) tunable has been set.
"iwi%d: could not load boot firmware"
An attempt to upload the boot firmware image to the onboard microcontroller failed. This should not happen.
"iwi%d: could not load microcode"
An attempt to upload the microcode image to the onboard microcontroller failed. This should not happen.
"iwi%d: could not load main firmware"
An attempt to upload the main firmware image to the onboard microcontroller failed. This should not happen.

SEE ALSO

altq(4), ipw(4), pci(4), wlan(4), ifconfig(8)

AUTHORS

The driver was written by An Damien Bergamini Aq damien@FreeBSD.org .