Rechercher une page de manuel
nxge.4freebsd
Langue: en
Version: 300307 (debian - 07/07/09)
Section: 4 (Pilotes et protocoles réseau)
BSD mandoc
NAME
nxge - Neterion Xframe 10GbE Server/Storage adapter driverSYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:device nxge
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:
if_nxge_load="YES"
DESCRIPTION
The driver provides support for Neterion Xframe-I and Xframe-II adapters. The driver supports TCP Segmentation Offload (TSO/LSO), Large Receive Offlaod (LRO), Jumbo Frames (5 buffer mode), Header Separation (Rx 2 buffer mode), VLAN, and Promiscuous mode.For general information and support, please visit the Neterion support page http://www.neterion.com/support/support.html
Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility configures the adapter to transmit and receive Jumbo Frames. Xframe adapters support Jumbo Frames up to 9600 bytes.
For Jumbo frames, the driver will try to allocate physically contiguous buffers. Failures to do so may degrade the performance. To resolve such problems, please visit http://www.neterion.com where additional information and a kernel patch can be found.
For more information on configuring this device, see ifconfig(8).
HARDWARE
The driver supports Neterion Xframe 10 Gigabit Ethernet adapters listed in http://www.neterion.com/how/pricing.htmlSUPPORT
For troubleshooting tips and FAQs, please visit http://trac.neterion.com/cgi-bin/trac.cgi/wiki/TitleIndex?anonymousFor any issues please send an email to Aq support@neterion.com .
SEE ALSO
arp(4), netintro(4), ifconfig(8)HISTORY
The device driver first appeared in Fx 7.0 .AUTHORS
The driver was written by An Neterion Aq support@neterion.com .Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre