Rechercher une page de manuel

Chercher une autre page de manuel:

snd_gusc.4freebsd

Langue: en

Version: 300367 (debian - 07/07/09)

Section: 4 (Pilotes et protocoles réseau)


BSD mandoc

NAME

snd_gusc - Gravis UltraSound ISA bridge device driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:
device sound device snd_gusc

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

 snd_gusc_load="YES"
 

Non-PnP cards require the following lines in device.hints5:

 hint.gusc.0.at="isa"
 hint.gusc.0.port="0x220"
 hint.gusc.0.irq="5"
 hint.gusc.0.drq="1"
 hint.gusc.0.flags="0x13"
 

DESCRIPTION

The bridge driver allows the generic audio driver sound(4) to attach to Gravis UltraSound sound cards.

The value of flags specifies the secondary DMA channel. If the secondary DMA channel is C, set the flags to (C | 0x10). For a sound card without the secondary DMA channel, the flags should be set to zero.

HARDWARE

The driver supports the following sound cards:

DIAGNOSTICS

xxx: gus pcm not attached, out of memory
There are not enough memory to drive the device.

SEE ALSO

sound(4)

HISTORY

The device driver first appeared in Fx 4.0 .

AUTHORS

An Ville-Pertti Keinonen Aq will@iki.fi An Seigo Tanimura Aq tanimura@r.dl.itc.u-tokyo.ac.jp

BUGS

Recording pcm sound data is not supported yet.
11:06 Besoin d'aide d'urgence! Qqun sait comment faire pour que les
messages d'erreur system n'apparaisse plus sur la console ?
11:16 11:06 -> "shutdown -h now" : en gros tu demande à l'ordinateur de
fermer sa gueule à partir de maintenant.
11:17 merci de l'aide