Linux Certif

Toute la documentation sur la certification Linux LPI

policyd-spf.conf

NAME

python-policyd-spf - pure-Python Postfix policy daemon for SPF checking

VERSION

0.8

USAGE

Usage:
  policyd-spf [/etc/postfix-policyd-spf-python/policyd-spf.conf]

OTHER DOCUMENTATION

This documentation assumes you have read Postfix's README_FILES/ SMTPD_POLICY_README and are generally familiar with Sender Policy Framework (SPF). See RFC 4408 for details.

man 1 policyd-spf provides general operation documentation for this package.

man 5 policyd-spf.peruser provides documentation on setting up and using different configuration options on a per user (mail reciepient) basis.

SYNOPSIS

python-policyd-spf operates with a default installed configuration file and set of default configuration options that are used if the configuration file cannot be found. These options can be changed by changing the installed configuration files or through giving a path to an alternate configuration file.

DESCRIPTION

Configuration options are described here and in the configuration file provided with the package. The provided setup.py installs this configuration file in /etc/postfix-policyd-spf-python/.

Additionally, whitelisting certain IP addresses from SPF checks is supported. The this man page and the sample configuration file show the format to use. These options can be adjusted on a per user (mail recipient) basis. Details on per user settings can be found in policyd-spf.peruser(5).

OPTIONS

LOGGING

"debugLevel" controls ths amount of information logged by the policy server.

The default, 1, logs no debugging messages, just basic SPF results and errors generated through the policy server. This value can be increased up to 5 (values higher than 5 will not cause an error, but will not log any additional information).

debug level 2 adds a log message if no client address (IP address from which the connection was made), Mail From addresss, or HELO/EHLO name is received by the policy server, and logs SPF results for each Mail From and HELO check.

debug level 3 generates a log message each time the policy server starts and each time it exits, as well as logging an copy of the exact header returned to Postfix to be prepended into the message. Each time the policy server starts, debug level 3 also logs the configuration information used by the policy server.

debug level 4 logs the complete data set received by Postfix via the policy interface and when the end of the entry is read.

debug level 5 is used to debug config file processing and can only be set in code and not via the config file.

If debug level is 0, then the policy server logs errors only.

Default:

debugLevel = 1

TEST OPERATION

The policy server can operate in a test only mode. This allows you to see the potential impact of SPF checking in your mail logs without rejecting mail. Headers are prepended in messages, but message delivery is not affected. This mode is not enabled by default. To enable it, set defaultSeedOnly = 0.

Default:

defaultSeedOnly = 1

HELO/EHLO CHECKING

HELO check rejection policy options are:

SPF_Not_Pass (default) - Reject if result not Pass/None/Tempfail. Unlike Mail From checking, there are no standard e-mail use cases where a HELO check should not Pass if there is an SPF record for the HELO name (transparent forwarding, for example, is not an issue). Technically this option is not fully RFC 4408 compliant since the Mail From identity is mandatory, but HELO/EHLO is known first in the SMTP dialogue and there is no practical reason to waste resources on Mail From checks if the HELO check will already cause the message to be rejected.

Softfail - Reject on HELO Softfail or Fail. Technically this option is not fully RFC 4408 compliant since the Mail From identity is mandatory, but HELO/ EHLO is known first in the SMTP dialogue and there is no practical reason to waste resources on Mail From checks if the HELO check will already cause the message to be rejected.

Fail - Reject only on HELO Fail. Technically this option is not fully RFC 4408 compliant since the Mail From identity is mandatory, but HELO/EHLO is known first in the SMTP dialogue and there is no practical reason to waste resources on Mail From checks if the HELO check will already cause the message to be rejected.

Null - Only reject HELO Fail for Null sender (SPF Classic). This is the approach used by the pre-RFC 4408 reference implementation and many of the pre- RFC specifications. Use of at least this option (SPF_Not_Pass or Fail) are preferred) is highly recommended.

False - Never reject on HELO, append header only. This is useful for post-SMTP spam filters such as SpamAssassin.

No_Check - Never check HELO. This is only recommended if you are calling the policy server twice (once for HELO checks and once for Mail From) with two different configuration files. This approach is useful to get both the HELO and Mail From headers prepended to a message.

Default:

HELO_reject = SPF_Not_Pass

HELO/EHLO PASS RESTRICTION

HELO Pass Restriction allows integration with other Postfix access contlols by provding a user supplied name of a postfix access restriction to be applied to a message when the HELO checking result is Pass. The indicated restriction must be an action as defined for a Postfix SMTP server access table access(5) and explained in the Postfix RESTRICTION CLASS README. Note: A helo pass restriction will be the returned result even if the mail from result would cause the message to be rejected.

Example:

HELO_pass_restriction = helo_passed_spf

Default:

None

Mail From CHECKING

Mail From rejection policy options are:

SPF_Not_Pass - Reject if result not Pass/None/Tempfail. This option is not RFC 4408 compliant since the mail with an SPF Neutral result is treated differently than mail with no SPF record and Softfail results are not supposed to cause mail rejection. Global use of this option is not recommended. Use per-domain if needed (per-domain usage described below).

Softfail - Reject on HELO Softfail or Fail. Technically this option is not fully RFC 4408 compliant since Softfail results are not supposed to cause mail rejection. Global use of this option is not recommended. Use per-domain if needed (per-domain usage described below).

Fail (default) - Reject on Mail From Fail.

False - Never reject on Mail From, append header only. This is useful for post-SMTP spam filters such as SpamAssassin.

No_Check - Never check Mail From/Return Path. This is only recommended if you are calling the policy server twice (once for HELO checks and once for Mail From) with two different configuration files. This approach is useful to get both the HELO and Mail From headers prepended to a message. It could also be used to do HELO checking only (because HELO checking has a lower false positive risk than Mail From checking), but this approach would not be fully RFC 4408 compliant since the Mail From identity is mandatory.

Default:

Mail_From_reject = Fail

Mail From PASS RESTRICTION

Mail From Pass Restriction allows integration with other Postfix access contlols by provding a user supplied name of a postfix access restriction to be applied to a message when the HELO checking result is Pass. The indicated restriction must be an action as defined for a Postfix SMTP server access table access(5) and explained in the Postfix RESTRICTION CLASS README. Note: A mail from pass restriction will be the returned result even if the helo result would cause the message to be rejected.

Example:

mail_from_pass_restriction = mfrom_passed_spf

Default:

None

Limit Rejections To Domains That Send No Mail

No_Mail - Only reject when SPF indicates the host/domain sends no mail. This option will only cause mail to be rejected if the HELO/Mail From record is "v=spf1 -all". This option is useful for rejecting mail in situations where the tolerance for rejecting wanted mail is very low. It operates on both HELO and Mail From identities if set.

Default:

No_Mail = False

Domain Specific Receiver Policy

Using this option, a list of domains can be defined for special processing when messages do not Pass SPF. This can be useful for commonly spoofed domains that are not yet publishing SPF records with -all. Specifically, if mail from a domain in this list has a Neutral/Softfail result, it will be rejected (as if it had a Fail result). This option is not supported by RFC 4408, but if needed, it is better to do it on a per-domain basis rather than globally.

Example:

Reject_Not_Pass_Domains = aol.com,hotmail.com

Default:

None

Permanatent Error Processing

Policy for rejecting due to SPF PermError options are:

True - Reject the message if the SPF result (for HELO or Mail From) is PermError. This has a higher short-term false positive risk, but does result in senders getting feedback that they have a problem with their SPF record.

False - Treat PermError the same as no SPF record at all. This is consistet with the pre-RFC usage (the pre-RFC name for this error was "Unknown").

This is a global option that affects both HELO and Mail From scopes when checks for that scope are enabled. The only per scope setting that can over-ride this is Mail_From/HELO_reject = False/

Default:

PermError_reject = False

Temporary Error Processing

Policy for deferring messages due to SPF TempError options are:

True - Reject the message if the SPF result (for HELO or Mail From) is TempError. This is the traditional usage and has proven useful in reducing acceptance of unwanted messages. Sometimes spam senders do not retry. Sometimes by the time a message is retried the sending IP has made it onto a DNS RBL and can then be rejected. This is not the default because it is possible for some DNS errors that are classified as "Temporary" per RFC to be permanent in the sense that they require operator intervention to correct.

This is a global option that affects both HELO and Mail From scopes when checks for that scope are enabled. The only per scope setting that can over-ride this is Mail_From/HELO_reject = False/

False - Treat TempError the same as no SPF record at all. This is the default to minimize false positive risk.

Default:

TempError_Defer = False

Prospective SPF Check

Prospective SPF checking - Check to see if mail sent from the defined IP address would pass. This is useful for outbound MTAs to avoid sending mail that would Fail SPF checks when received. Disable HELO checking when using this option. It's only potentially useful for Mail From checking. SPF Received headers are not added when this option is used.

Prospective = 192.168.0.4

Default:

None

LOCAL SPF BYPASS LIST

Do not check SPF for localhost addresses - add to skip addresses to skip SPF for internal networks if desired. Defaults are standard IPv4 and IPv6 localhost addresses. This can also be used, to allow mail from local clients submitting mail to an MTA also acting as a Mail Submission Agent (MSA) to be skipped. An x-header is prepended indicating SPF checks were skipped due to a local address. This is a trace header only. Note the lack of spaces in the list.

Default:

skip_addresses = 127.0.0.0/8,::ffff:127.0.0.0//104,::1//128

SPF IP WHITELIST

A comma separated CIDR Notation list of IP addresses to skip SPF checks for. Use this list to whitelist trusted relays (such as a secondary MX and trusted forwarders). An x-header is prepended indicating the IP was whitelisted against SPF checks. This is a trace header only. Note the lack of spaces in the list.

Example:

Whitelist = 192.168.0.0/31,192.168.1.0/30

Default:

None

SPF DOMAIN WHITELIST

Domain_Whitelist: List of domains whose sending IPs should be whitelisted from SPF checks. Use this to list trusted forwarders by domain name. Client IP addresses are tested against SPF records published by the listed domains. This is useful for large forwarders with complex outbound infrastructures and SPF records. This option is less scalable than the SPF IP Whitelist. An x-header is prepended indicating the IP was whitelisted against SPF checks. This is a trace header only. This option does nothing if the domain does not have an SPF record. In this case use the SPF IP Whitelist described above or Domain_Whitelist_PTR (below). Note the lack of spaces in the list.

Example:

Domain_Whitelist = pobox.com,trustedforwarder.org

Default:

None

PTR DOMAIN WHITELIST

Domain_Whitelist_PTR: List of domains (and subdomains) whose sending IPs should be whitelisted from SPF checks based on PTR match of the domain. Use this to list trusted forwarders by domain name if they do not publish SPF records. Client IP addresses PTR names are tested to see if they match the listed domains. This is useful for large forwarders with complex outbound infrastructures, but no SPF records and predictable host naming. Matching is done using the same rules as the SPF PTR mechanism as described in RFC 4408. List the parent domain and all subdomains will match. This option is less scalable than the SPF IP Whitelist. An x-header is prepended indicating the IP was whitelisted against SPF checks. This is a trace header only. This option does nothing if the host does not have a PTR record record. In this case use the SPF IP Whitelist described above. Note the lack of spaces in the list.

Example:

Domain_Whitelist_PTR = yahoo.com,yahoogroups.com

Default:

None

SEE ALSO

man 1 policyd-spf, man 5 policyd-spf.peruser, python-spf, <http://www.openspf.org>, RFC 4408

AUTHORS

This version of pypolicyd-spf was written by Copyright © 2007, 2008,2009,2010 Scott Kitterman <scott@kitterman.com>. It is derived from Tumgreyspf, written by Sean Reifschneider, tummy.com, ltd <jafo@tummy.com>. Portions of the documentation were written by Meng Weng Wong <mengwong@pobox.com>.

This man-page was created by Scott Kitterman <scott@kitterman.com>.