stapprobes

Langue: en

Version: 2009-01-21 (CentOS - 06/07/09)

Section: 5 (Format de fichier)

NAME

stapprobes - systemtap probe points

DESCRIPTION

The following sections enumerate the variety of probe points supported by the systemtap translator, and additional aliases defined by standard tapset scripts.

The general probe point syntax is a dotted-symbol sequence. This allows a breakdown of the event namespace into parts, somewhat like the Domain Name System does on the Internet. Each component identifier may be parametrized by a string or number literal, with a syntax like a function call. A component may include a "*" character, to expand to a set of matching probe points. Probe aliases likewise expand to other probe points. Each and every resulting probe point is normally resolved to some low-level system instrumentation facility (e.g., a kprobe address, marker, or a timer configuration), otherwise the elaboration phase will fail.

However, a probe point may be followed by a "?" character, to indicate that it is optional, and that no error should result if it fails to resolve. Optionalness passes down through all levels of alias/wildcard expansion. Alternately, a probe point may be followed by a "!" character, to indicate that it is both optional and sufficient. (Think vaguely of the prolog cut operator.) If it does resolve, then no further probe points in the same comma-separated list will be resolved. Therefore, the "!" sufficiency mark only makes sense in a list of probe point alternatives.

Additionally, a probe point may be followed by a "if (expr)" statement, in order to enable/disable the probe point on-the-fly. With the "if" statement, if the "expr" is false when the probe point is hit, the whole probe body including alias's body is skipped. The condition is stacked up through all levels of alias/wildcard expansion. So the final condition becomes the logical-and of conditions of all expanded alias/wildcard.

These are all syntactically valid probe points:


 kernel.function("foo").return
 syscall(22)
 user.inode("/bin/vi").statement(0x2222)
 end
 syscall.*
 kernel.function("no_such_function") ?
 module("awol").function("no_such_function") !
 signal.*? if (switch)
 
 

Probes may be broadly classified into "synchronous" and "asynchronous". A "synchronous" event is deemed to occur when any processor executes an instruction matched by the specification. This gives these probes a reference point (instruction address) from which more contextual data may be available. Other families of probe points refer to "asynchronous" events such as timers/counters rolling over, where there is no fixed reference point that is related. Each probe point specification may match multiple locations (for example, using wildcards or aliases), and all them are then probed. A probe declaration may also contain several comma-separated specifications, all of which are probed.

BEGIN/END/ERROR

The probe points begin and end are defined by the translator to refer to the time of session startup and shutdown. All "begin" probe handlers are run, in some sequence, during the startup of the session. All global variables will have been initialized prior to this point. All "end" probes are run, in some sequence, during the normal shutdown of a session, such as in the aftermath of an exit () function call, or an interruption from the user. In the case of an error-triggered shutdown, "end" probes are not run. There are no target variables available in either context.

If the order of execution among "begin" or "end" probes is significant, then an optional sequence number may be provided:


 begin(N)
 end(N)
 
 

The number N may be positive or negative. The probe handlers are run in increasing order, and the order between handlers with the same sequence number is unspecified. When "begin" or "end" are given without a sequence, they are effectively sequence zero.

The error probe point is similar to the end probe, except that each such probe handler run when the session ends after errors have occurred. In such cases, "end" probes are skipped, but each "error" prober is still attempted. This kind of probe can be used to clean up or emit a "final gasp". It may also be numerically parametrized to set a sequence.

NEVER

The probe point never is specially defined by the translator to mean "never". Its probe handler is never run, though its statements are analyzed for symbol / type correctness as usual. This probe point may be useful in conjunction with optional probes.

SYSCALL

The syscall.* aliases define several hundred probes, too many to summarize here. They are:


 syscall.NAME
 
syscall.NAME.return

Generally, two probes are defined for each normal system call as listed in the syscalls(2) manual page, one for entry and one for return. Those system calls that never return do not have a corresponding .return probe.

Each probe alias defines a variety of variables. Looking at the tapset source code is the most reliable way. Generally, each variable listed in the standard manual page is made available as a script-level variable, so syscall.open exposes filename, flags, and mode. In addition, a standard suite of variables is available at most aliases:

argstr
A pretty-printed form of the entire argument list, without parentheses.
name
The name of the system call.
retstr
For return probes, a pretty-printed form of the system-call result.

Not all probe aliases obey all of these general guidelines. Please report any bothersome ones you encounter as a bug.

TIMERS

Intervals defined by the standard kernel "jiffies" timer may be used to trigger probe handlers asynchronously. Two probe point variants are supported by the translator:


 timer.jiffies(N)
 timer.jiffies(N).randomize(M)
 
 

The probe handler is run every N jiffies (a kernel-defined unit of time, typically between 1 and 60 ms). If the "randomize" component is given, a linearly distributed random value in the range [-M..+M] is added to N every time the handler is run. N is restricted to a reasonable range (1 to around a million), and M is restricted to be smaller than N. There are no target variables provided in either context. It is possible for such probes to be run concurrently on a multi-processor computer.

Alternatively, intervals may be specified in units of time. There are two probe point variants similar to the jiffies timer:


 timer.ms(N)
 timer.ms(N).randomize(M)
 
 

Here, N and M are specified in milliseconds, but the full options for units are seconds (s/sec), milliseconds (ms/msec), microseconds (us/usec), nanoseconds (ns/nsec), and hertz (hz). Randomization is not supported for hertz timers.

The actual resolution of the timers depends on the target kernel. For kernels prior to 2.6.17, timers are limited to jiffies resolution, so intervals are rounded up to the nearest jiffies interval. After 2.6.17, the implementation uses hrtimers for tighter precision, though the actual resolution will be arch-dependent. In either case, if the "randomize" component is given, then the random value will be added to the interval before any rounding occurs.

Profiling timers are also available to provide probes that execute on all CPUs at the rate of the system tick. This probe takes no parameters.


 timer.profile
 
 

Full context information of the interrupted process is available, making this probe suitable for a time-based sampling profiler.

DWARF

This family of probe points uses symbolic debugging information for the target kernel/module/program, as may be found in unstripped executables, or the separate debuginfo packages. They allow placement of probes logically into the execution path of the target program, by specifying a set of points in the source or object code. When a matching statement executes on any processor, the probe handler is run in that context.

Points in a kernel, which are identified by module, source file, line number, function name, or some combination of these.

Here is a list of probe point families currently supported. The .function variant places a probe near the beginning of the named function, so that parameters are available as context variables. The .return variant places a probe at the moment after the return from the named function, so the return value is available as the "$return" context variable. The .inline modifier for .function filters the results to include only instances of inlined functions. The .call modifier selects the opposite subset. Inline functions do not have an identifiable return point, so .return is not supported on .inline probes. The .statement variant places a probe at the exact spot, exposing those local variables that are visible there.


 kernel.function(PATTERN)
 
kernel.function(PATTERN).call
kernel.function(PATTERN).return
kernel.function(PATTERN).inline
module(MPATTERN).function(PATTERN)
module(MPATTERN).function(PATTERN).call
module(MPATTERN).function(PATTERN).return
module(MPATTERN).function(PATTERN).inline

kernel.statement(PATTERN)
kernel.statement(ADDRESS).absolute
module(MPATTERN).statement(PATTERN)

In the above list, MPATTERN stands for a string literal that aims to identify the loaded kernel module of interest. It may include "*", "[]", and "?" wildcards. PATTERN stands for a string literal that aims to identify a point in the program. It is made up of three parts:

The first part is the name of a function, as would appear in the nm program's output. This part may use the "*" and "?" wildcarding operators to match multiple names.
The second part is optional and begins with the "@" character. It is followed by the path to the source file containing the function, which may include a wildcard pattern, such as mm/slab*. If it does not match as is, an implicit "*/" is optionally added before the pattern, so that a script need only name the last few components of a possibly long source directory path.
Finally, the third part is optional if the file name part was given, and identifies the line number in the source file preceded by a ":" or a "+". The line number is assumed to be an absolute line number if preceded by a ":", or relative to the entry of the function if preceded by a "+". All the lines in the function can be matched with ":*". A range of lines x through y can be matched with ":x-y".

As an alternative, PATTERN may be a numeric constant, indicating an address. Such an address may be found from symbol tables of the appropriate kernel / module object file. It is verified against known statement code boundaries, and will be relocated for use at run time.

In guru mode only, absolute kernel-space addresses may be specified with the ".absolute" suffix. Such an address is considered already relocated, as if it came from /proc/kallsyms, so it cannot be checked against statement/instruction boundaries.

Some of the source-level context variables, such as function parameters, locals, globals visible in the compilation unit, may be visible to probe handlers. They may refer to these variables by prefixing their name with "$" within the scripts. In addition, a special syntax allows limited traversal of structures, pointers, and arrays.

$var
refers to an in-scope variable "var". If it's an integer-like type, it will be cast to a 64-bit int for systemtap script use. String-like pointers (char *) may be copied to systemtap string values using the kernel_string or user_string functions.
$var->field
traversal to a structure's field. The indirection operator may be repeated to follow more levels of pointers.
$return
is available in return probes only for functions that are declared with a return value.
$var[N]
indexes into an array. The index is given with a literal number.
$$vars
expands to a character string that is equivalent to sprintf("parm1=%x ... parmN=%x var1=%x ... varN=%x", parm1, ..., parmN, var1, ..., varN)
$$locals
expands to a subset of $$vars for only local variables.
$$parms
expands to a subset of $$vars for only function parameters.
$$return
is available in return probes only. It expands to a string that is equivalent to sprintf("return=%x", $return) if the probed function has a return value, or else an empty string.

For ".return" probes, context variables other than the "$return" value itself are only available for the function call parameters. The expressions evaluate to the entry-time values of those variables, since that is when a snapshot is taken. Other local variables are not generally accessible, since by the time a ".return" probe hits, the probed function will have already returned.

USER-SPACE

Early prototype support for user-space probing is available in the form of a non-symbolic probe point:
 process(PID).statement(ADDRESS).absolute
 
 
is analogous to kernel.statement(ADDRESS).absolute in that both use raw (unverified) virtual addresses and provide no $variables. The target PID parameter must identify a running process, and ADDRESS should identify a valid instruction address. All threads of that process will be probed.

Additional user-space probing is available in the following forms:

 process(PID).begin
 process("PATH").begin
 process.begin
 process(PID).thread.begin
 process("PATH").thread.begin
 process.thread.begin
 process(PID).end
 process("PATH").end
 process.end
 process(PID).thread.end
 process("PATH").thread.end
 process.thread.end
 process(PID).syscall
 process("PATH").syscall
 process.syscall
 process(PID).syscall.return
 process("PATH").syscall.return
 process.syscall.return
 process(PID).itrace
 process("PATH").itrace
 
 

A .begin probe gets called when new process described by PID or PATH gets created. A .thread.begin probe gets called when a new thread described by PID or PATH gets created. A .end probe gets called when process described by PID or PATH dies. A .thread.end probe gets called when a thread described by PID or PATH dies. A .syscall probe gets called when a thread described by PID or PATH makes a system call. The system call number is available in the $syscall context variable, and the first 6 arguments of the system call are available in the $argN (ex. $arg1, $arg2, ...) context variable. A .syscall.return probe gets called when a thread described by PID or PATH returns from a system call. The system call number is available in the $syscall context variable, and the return value of the system call is available in the $return context variable. A .itrace probe gets called for every single step of the process described by PID or PATH.

Note that PATH names refer to executables that are searched the same way shells do: relative to the working directory if they contain a "/" character, otherwise in $PATH. If a process probe is specified without a PID or PATH, all user threads are probed.

PROCFS

These probe points allow procfs "files" in /proc/systemtap/MODNAME to be created, read and written (MODNAME is the name of the systemtap module). The proc filesystem is a pseudo-filesystem which is used an an interface to kernel data structures. There are four probe point variants supported by the translator:


 procfs("PATH").read
 procfs("PATH").write
 procfs.read
 procfs.write
 
 

PATH is the file name (relative to /proc/systemtap/MODNAME) to be created. If no PATH is specified (as in the last two variants above), PATH defaults to "command".

When a user reads /proc/systemtap/MODNAME/PATH, the corresponding procfs read probe is triggered. The string data to be read should be assigned to a variable named $value, like this:


 procfs("PATH").read { $value = "100\n" }
 
 

When a user writes into /proc/systemtap/MODNAME/PATH, the corresponding procfs write probe is triggered. The data the user wrote is available in the string variable named $value, like this:


 procfs("PATH").write { printf("user wrote: %s", $value) }
 
 

MARKERS

This family of probe points hooks up to static probing markers inserted into the kernel or modules. These markers are special macro calls inserted by kernel developers to make probing faster and more reliable than with DWARF-based probes. Further, DWARF debugging information is not required to probe markers.

Marker probe points begin with kernel. The next part names the marker itself: mark(name). The marker name string, which may contain the usual wildcard characters, is matched against the names given to the marker macros when the kernel and/or module was compiled. Optionally, you can specify format(format). Specifying the marker format string allows differentation between two markers with the same name but different marker format strings.

The handler associated with a marker-based probe may read the optional parameters specified at the macro call site. These are named $arg1 through $argNN, where NN is the number of parameters supplied by the macro. Number and string parameters are passed in a type-safe manner.

The marker format string associated with a marker is available in $format. And also the marker name string is avalable in $name.

PERFORMANCE MONITORING HARDWARE

The perfmon family of probe points is used to access the performance monitoring hardware available in modern processors. This family of probes points needs the perfmon2 support in the kernel to access the performance monitoring hardware.

Performance monitor hardware points begin with a perfmon. The next part of the names the event being counted counter(event). The event names are processor implementation specific with the execption of the generic cycles and instructions events, which are available on all processors. This sets up a counter on the processor to count the number of events occuring on the processor. For more details on the performance monitoring events available on a specific processor use the command perfmon2 command:


 pfmon -l
 
 
$counter
is a handle used in the body of the probe for operations involving the counter associated with the probe.
read_counter
is a function that is passed the handle for the perfmon probe and returns the current count for the event.

EXAMPLES

Here are some example probe points, defining the associated events.

begin, end, end
refers to the startup and normal shutdown of the session. In this case, the handler would run once during startup and twice during shutdown.
timer.jiffies(1000).randomize(200)
refers to a periodic interrupt, every 1000 +/- 200 jiffies.
kernel.function("*init*"), kernel.function("*exit*")
refers to all kernel functions with "init" or "exit" in the name.
kernel.function("*@kernel/sched.c:240")
refers to any functions within the "kernel/sched.c" file that span line 240.
kernel.mark("getuid")
refers to an STAP_MARK(getuid, ...) macro call in the kernel.
module("usb*").function("*sync*").return
refers to the moment of return from all functions with "sync" in the name in any of the USB drivers.
kernel.statement(0xc0044852)
refers to the first byte of the statement whose compiled instructions include the given address in the kernel.
kernel.statement("*@kernel/sched.c:2917")
refers to the statement of line 2917 within "kernel/sched.c".
kernel.statement("bio_init@fs/bio.c+3")
refers to the statement at line bio_init+3 within "fs/bio.c".
syscall.*.return
refers to the group of probe aliases with any name in the third position

SEE ALSO

stap(1), stapprobes.iosched(5), stapprobes.netdev(5), stapprobes.nfs(5), stapprobes.nfsd(5), stapprobes.pagefault(5), stapprobes.process(5), stapprobes.rpc(5), stapprobes.scsi(5), stapprobes.signal(5), stapprobes.socket(5), stapprobes.tcp(5), stapprobes.udp(5), proc(5)