anyremote2html

Langue: en

Version: 264013 (debian - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

anyremote2html - web interface for anyRemote acting as HTTP server

SYNOPSIS

anyremote2html -w web-port -a anyRemote-port [-i directory-with-icons] [-s 16|32|64] [-r refresh rate] [--width integer] [-d]

DESCRIPTION

The overall goal of this project is to provide remote control service on Linux through Bluetooth, InfraRed, Wi-Fi or just TCP/IP connection.

anyRemote supports a wide range of modern cell phones like Nokia, SonyEricsson, Motorola and others.

It was developed as a thin "communication" layer between Bluetooth (IR, Wi-Fi)-capabled phones and Linux, and in theory it could be configured to manage almost any software.

anyRemote is a console application, but in addition there are GUI front-ends for Gnome and KDE and this web front-end.

With the help of this interface any device which contains a web browser and which can connect to the PC with anyRemote by TCP/IP (GPRS, Wi-Fi, ...) could be used as a remote control.

USAGE

Run anyremote/kanyremote with "-s socket:<port>" option:
anyremote -s socket:5000 -f <cfg. file>

Run anyremote2html -a <anyremote port> -w <http port> -s 16|32|64 -i <directory with icons>
For example:
anyremote2html -a 5000 -w 5050 -s 64 -i /usr/share/pixmaps/anyRemote2html

Run browser on device and connect to http://<ip.of.PC>:5050

For easier use and configuration of anyRemote as well as anyRemote2html, use either kAnyRemote or gAnyRemote.
Further information is shipped with the anyRemote package.

OPTIONS

-h, --help
Show summary of options.
-w <web port>
Use specified port for HTTP server, default is 5550
-a <anyRemote port>
Use specified port to connect to anyRemote, default is 5000
-i <directory with icons>
Default is /usr/share/pixmaps/anyremote2html/
-s 16|32|64
Use specified icon size, default is 64
-r no|smart|<positive int>
Set refresh rate for web page, "no" means no refresh, "smart" means variable refresh rate (default)
--width <positive int>
Assume screen width is specified value, default is 800
-d
Show debug output

SEE ALSO

anyremote(1), ganyremote(1x), kanyremote(1x).

BUGS

If you find any bugs, please report to anyremote@mail.ru

AUTHOR

anyremote2html was written by Mikhail Fedotov <anyremote@mail.ru>.

This manual page was written by Philipp Huebner <debalance@arcor.de>, for the Debian project (and may be used by others).