cil

Langue: en

Version: 2009-05-08 (debian - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

cil - the command-line issue list

SYNOPSIS

     $ cil init
     $ cil summary
     $ cil list
     $ cil list --status=New
     $ cil list --label=Release-v0.1
     $ cil list --is-open
 
     $ cil add
     ... added issue 'cafebabe' ...
     $ cil show cafebabe
     $ cil edit cafebabe
     $ cil status cafebabe InProgress
 
     $ cil comment cafebabe
     ... added comment 'deadbeef' ...
 
     $ cil attach cafebabe filename.txt
     ... added attachment 'decaf7ea' ...
 
     $ cil extract decaf7ea
     $ cil extract decaf7ea --filename=other_filename.txt
 
     $ cil am email.txt
 
     $ cil track
     $ cil fsck
 
 

DESCRIPTION

Cil is a small but useful command-line issue list. It saves issues, comments and attachments as local files which you can check in to your repository.
init [--path=PATH] [--bare]
Creates a local '.cil' file and an 'issues' directory. If PATH is specified, the config file and directory will be created in the destination directory.

Usually, cil will write a small ".cil" file such that you can use various filter commands immediately and can also serve as an example config file. Using "--bare" just touches the ".cil" config file ready for your own manipulation.

summary [filters]
Displays a one line summary for each issue. You may filter on both the Status and Label fields.
list [filters]
Shows each issue with more information. You may filter on both the Status and Label fields.
add
Adds an issues after you have edited the input.
show ISSUE
Shows the issue name with more detail.
status ISSUE NEW_STATUS
Shortcut so that you can set a new status on an issue without having to edit it.
depends-on ISSUE1 ISSUE2
Shortcut so that cil will add a 'DependsOn' from issue 1 to issue 2. Conversley, issue 2 will also then contain a 'Precedes' pointer to issue 1.
precedes ISSUE1 ISSUE2
This is the exact opposite of "depends-on" and is here for convenience and completeness. ie. issue 1 has to be completed before issue 2.
status ISSUE NEW_STATUS
Shortcut so that you can set a new status on an issue without having to edit it.
steal ISSUE
Shortcut to assign this issue to yourself. It reads your "~/.cilrc" file for your UserName and UserEmail and uses this to populate the "AssignedTo" field in the issue.
edit ISSUE
Edits the issue. If it changes, set the updates time to now.
comment ISSUE
Adds a comment to an issues after you have edited the input.
attach ISSUE FILENAME
Adds that particular filename to an existing issue.
extract ATTACHMENT [--filename=FILENAME]
Extracts the file from the attachment number. If filename if given uses that, otherwise it will use the original one saved along with the attachment.
am
Applies an email message to the issue list. It tries to figure out the type of email it is, whether it is a new issue or a comment on an already existing issue. For example, if it can find valid issue names in the subject or body of the message, it adds it as a comment to that issue. If it can't find any valid issue names, it presumes it's a new issue and adds that.

Note: this command will deal with Mailbox format files later on.

track ISSUE
This command outputs one or more command which you should run so that your VCS knows about your issue. It makes sure all the comments and attachments are done too.
fsck
Tries to help you organise your issues if any aren't valid or have broken relationships.

FILTERS

Filters can be used on both the "summary" and "list" commands. Most can be combined. See each individual filter for details.
--status=STATUS
You can choose any of the Statuses which might appear in your issues. This status does not have to be defined in your ".cil" file, even if you have "StatusStrict" turned on.
--label=LABEL
You can choose any of the Labels which might appear in your issues. This label does not have to be defined in your ".cil" file, even if you have "LabelStrict" turned on.
--is-open, --is-closed
These check both "StatusOpenList" and "StatusClosedList" from your ".cil" file. If both are specified, you're likely to get no issues unless you explicitely defined a status as being in both lists (for whatever reason you have).
--assigned-to=EMAIL_ADDRESS, --is-mine
These items are mutually exclusive. The "--assigned-to" just checks the email address in the AssignedTo field. It does not match anything else in that field, including any preceding name or any angle brackets.

The "--is-mine" filter is a shortcut to asking if AssignedTo is you. Cil knows your email address if you define it in your user's "~/.cilrc" file as "UserEmail".

.cil

The ".cil" file is used to configure bits and pieces within cil for this particular issue list. The following options are available and where stated, may be declared multiple times:

The ".cil" file is fairly simple and an example can be seen here:

     VCS: Git
     StatusStrict: 1
     StatusAllowedList: New
     StatusAllowedList: InProgress
     StatusAllowedList: Finished
     StatusOpenList: New
     StatusOpenList: InProgress
     StatusClosedList: Finished
     LabelStrict: 1
     LabelAllowedList: Type-Enhancement
     LabelAllowedList: Type-Defect
     LabelAllowedList: Priority-High
     LabelAllowedList: Priority-Medium
     LabelAllowedList: Priority-Low
 
 
VCS
Default: empty, Type: Enum(Git)

Currently this option only supports Git. This enables you to use the 'track' command.

StatusStrict
Default: 0, Type: Boolean (0/1)

If this is set to a true value then cil checks that the status you enter into an issue (after adding or editing) is also in the allowed list (see StatusAllowedList).

StatusAllowedList
Default: empty, Type: List

This list is checked against when adding or editing issues but only if you have StatusStrict on.

StatusOpenList
Default: empty, Type: List

This list is checked against when filtering with --is-open.

StatusClosedList
Default: empty, Type: List

This list is checked against when filtering with --is-closed.

LabelStrict
Default: 0, Type: Boolean (0/1)

This determines that labels you enter are checked against LabelAllowedList. Set to 1 if you require this feature.

LabelAllowedList
Default: empty, Type: List

This determines which labels are allowed if you have turned on LabelStrict.

~/.cilrc

The "~/.cilrc" file is read to configure the user's preferences for all cil lists they're using. It is of the same format as the ".cil" file and contains the following options:
     UserName: Andrew Chilton
     UserEmail: andychilton@gmail.com
 
 
UserName
Default: 'Name', Type: String

This is used as a default in the "CreatedBy" and "AssignedTo" fields in any issues/comments/attachments you add.

UserEmail
Default: 'Email', Type: String

This is used as a default in the "CreatedBy" and "AssignedTo" fields in any issues/comments/attachments you add.

BUGS

Probably. Let me know :-)

TODO

To get a ToDo list for cil, clone the repo, find the issues/ dir and type:
     $ cil --is-open
 
 

This gives the current outstanding issues in cil.

AUTHOR

Andrew Chilton <andychilton@gmail.com> Copyright (C) 2008 by Andrew Chilton

Cil is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/> or write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.