Rechercher une page de manuel
gphoto2
Langue: en
Version: September 2004 (CentOS - 06/07/09)
Section: 1 (Commandes utilisateur)
NAME
gphoto2 - command-line gphoto2 clientSYNOPSIS
- gphoto2 [--debug] [-q | --quiet] [-v | --verbose] [-h | --help]
[--list-cameras] [--list-ports] [--stdout] [--stdout-size]
[--auto-detect] [--port PATH] [--speed SPEED] [--camera MODEL]
[--filename FILENAME]
[--usbid USBIDS]
[-a | --abilities]
[--folder FOLDER | -f FOLDER] [[-R | --recurse] | --no-recurse] [-l | --list-folders]
[-L | --list-files] [-m NAME | --mkdir NAME]
[-r NAME | --rmdir NAME] [-n | --num-files]
[-p RANGE | --get-file RANGE] [-P | --get-all-files]
[-t RANGE | --get-thumbnail RANGE]
[-T | --get-all-thumbnails]
[--get-raw-data RANGE] [--get-all-raw-data]
[--get-audio-data RANGE] [--get-all-audio-data]
[--force-overwrite]
[--new]
[-d RANGE | --delete-file RANGE] [-D | --delete-all-files]
[-u FILENAME | --upload-file FILENAME] [--config]
[--list-config]
[--get-config CONFIGENTRY]
[--set-config CONFIGENTRY=CONFIGVALUE]
[--capture-preview]
[-F COUNT | --frames COUNT] [-I SECONDS | --interval SECONDS] [--capture-image] [--capture-movie] [--capture-sound]
[--show-info RANGE]
[--show-exif RANGE]
[--summary] [--manual] [--about] [--shell]
DESCRIPTION
libgphoto2(3) is a cross-platform digital camera library, and gphoto2(1) is a command-line client for it.
- Where an option takes a range of files, thumbnails, or other data, they are numbered beginning at 1. A range is a comma-separated list of numbers or spans (``first-last''). Ranges are XOR (exclusive or), so that ``1-5,3,7'' is equivalent to ``1,2,4,5,7''.
- --debug
- Turn on debugging.
- -q, --quiet
- Quiet output (default=verbose).
- -v, --version
- Display version and exit.
- -h, --help
- Display a short usage message.
- --list-cameras
- List supported camera models.
- --list-ports
- List supported port devices.
- --stdout
- Send file to stdout.
- --stdout-size
- Print filesize before data.
- --auto-detect
- List auto-detected cameras and the ports to which they are connected.
- --port PATH
- Specify port device. The --list-ports prints a list of valid, usable ports. In case of multiple USB cameras, the --auto-detect shows you the specific port each camera is connected to.
- --speed SPEED
- Specify serial transfer speed.
- --camera MODEL
- Specify camera model. The --list-cameras option prints a list of all explicitly supported cameras.
Most model names contain spaces: remember to enclose the name in quotes so that the shell knows it is one parameter. For example: --camera "Kodak DC240".
Note that if you specify --camera, you must also specify --port. Otherwise the --camera option will be silently ignored.
- --filename FILENAME
- Specify the filename to use when saving downloaded files. The --filename option accepts %a, %A, %b, %B, %d, %H, %k, %I, %l, %j, %m, %M, %S, %y, %%, (see date(1)) and, in addition, %n for the number, %C for the filename suffix, and %f for the filename without suffix.
%n is the only conversion specifier to accept a padding character and width: %03n will pad with zeros to width 3 (e.g. print the number 7 as``007''). Leaving out the padding character (e.g. %3n) will use an implementation specific default padding character.
- --usbid USBIDS
- (Expert only) Override USB IDs. USBIDSmust be of the form DetectedVendorID:DetectedProductID=TreatAsVendorID:TreatAsProductID to treat any USB device detected as DetectedVendorID:DetectedProductID asTreatAsVendorID:TreatAsProductID instead. All the VendorIDs and ProductIDs should be hexadecimal numbers beginning in C notation, i.e. beginning with '0x'.
Example: --usbid 0x4a9:0x306b=0x4a9:0x306c
- -a, --abilities
- Display camera abilities.
- -f, --folder FOLDER
- Specify camera folder (default="/").
- --filename FILENAME
- Specify the filename to use when saving downloaded files. The --filename option accepts %a, %A, %b, %B, %d, %H, %k, %I, %l, %j, %m, %M, %S, %y, %%, (see date(1)) and, in addition, %n for the number, %C for the filename suffix, and %f for the filename without suffix.
- -R, --recurse
- Recursion (default for download).
- --no-recurse
- No recursion (default for deletion).
- -l, --list-folders
- List folders in folder.
- -L, --list-files
- List files in folder.
- -m, --mkdir NAME
- Create a directory.
- -r, --rmdir NAME
- Remove a directory.
- -n, --num-files
- Display number of files.
- -p, --get-file RANGE
- Get files given in range.
- -P, --get-all-files
- Get all files from folder.
- -t, --get-thumbnail RANGE
- Get thumbnails given in range.
- -T, --get-all-thumbnails
- Get all thumbnails from folder.
- --get-raw-data RANGE
- Get raw data given in range.
- --get-all-raw-data
- Get all raw data from folder.
- --get-audio-data RANGE
- Get audio data given in range.
- --get-all-audio-data
- Get all audio data from folder.
- --force-overwrite
- Overwrite files without asking.
- --new
- Only get not already downloaded files. This option depends on camera support of flagging already downloaded images and is not available for all drivers.
- -d, --delete-files RANGE
- Delete files given in range.
- -D, --delete-all-files
- Delete all files in folder.
- -u, --upload-file FILENAME
- Upload a file to camera.
- --capture-preview
- Capture a quick preview.
- -F COUNT, --frames COUNT
- Number of frames to capture in one run. Default is infinite number of frames.
- -I SECONDS, --interval SECONDS
- Time between capture of multiple frames.
- --capture-image
- Capture an image.
- --capture-movie
- Capture a movie.
- --capture-sound
- Capture an audio clip.
- --show-info RANGE
- Show info.
- --list-config
- List all configuration entries.
- --get-config CONFIGENTRY
- Get the specified configuration entry.
- --set-config CONFIGENTRY=CONFIGVALUE
- Set the specified configuration entry.
- --summary
- Summary of camera status.
- --manual
- Camera driver manual.
- --about
- About the camera driver.
- --shell
- Start the gphoto2 shell, an interactive environment. See SHELL MODE for a detailed description.
SHELL MODE
The following commands are available:
- cd
- Change to a directory on the camera.
- ls
- List the contents of the current directory on the camera.
- lcd
- Change to a directory on the local machine.
- get
- Download the file to the current directory.
- get-thumbnail
- Download the thumbnail to the current directory.
- get-raw
- Download raw data to the current directory.
- show-info
- Show information.
- delete
- Delete a file or directory.
- show-exif
- Show EXIF information (only if compiled with EXIF support).
- help, ?
- Displays command usage.
- exit, quit, q
- Exit the gphoto2 shell.
ENVIRONMENT VARIABLES
- CAMLIBS
- If set, defines the directory where libgphoto2 looks for its camera drivers (camlibs).
- IOLIBS
- If set, defines the directory where libgphoto2_port looks for its I/O drivers (camlibs).
- USB_DEBUG
- If set, defines the numeric libusb debug level with which libusb will print messages.
SEE ALSO
libgphoto2(3), The gPhoto2 Manual, http://www.gphoto.org/: http://www.gphoto.org/
EXAMPLES
- gphoto2 --list-ports
- Shows what kinds of ports (USB and serial) you have.
- gphoto2 --auto-detect
- Shows what camera(s) you have connected.
- gphoto2 --list-files
- List files on camera.
- gphoto2 --get-file 7-13
- Get files number 7 through 13 from the list output by gphoto2 --list-files.
AUTHOR
The gPhoto2 Team.Man page edited by Tim Waugh[ twaugh at redhat dot com ].
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre