ibp

Langue: en

Autres versions - même langue

Version: 252563 (debian - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

ibp - show which of the International Beacon Project beacons is transmitting

SYNOPSIS

ibp [arguments]

DESCRIPTION

IBP shows which of the beacons of the International Beacon Project is transmitting now.

The following arguments can be used:

a band expressed either in MHz (14, 18, 21, 24 or 28) or in meters (20, 17, 15, 12 or 10); if no band is specified, the program starts in multi-band mode.

a Maidenhead locator (like JO32KF or JO32), to be used for the calculation of distance and azimuth (both short and long path) to each beacon.

-c, --nocolour
don't use colour, even on a colour terminal.
-m, --morse
display callsign of active beacon in morse code (not in multi-band mode).
-x, --nograph
don't open the X11 window (showing a world map with the beacon locations, and short and long paths) even if the DISPLAY environment variable is set. This option is only available if X11 support has been compiled in.

Note: since each beacon transmission lasts only 10 seconds, your computer's clock should be set reasonably accurately for the results to be valid.

Note: no net connection is required to use ibp.

THE INTERNATIONAL BEACON PROJECT

The International Beacon Project is a set of 18 amateur (ham) radio transmitters around the world, each of which transmit every 3 minutes on a set of 5 short-wave frequencies. This allows short-wave radio users to quickly assess the current worldwide propagation conditions. Much more information can be found on http://www.ncdxf.org/beacons.html

AUTHOR

Pieter-Tjerk de Boer <pa3fwm@amsat.org>; via amateur packet-radio: PA3FWM @ PI8DAZ.#TWE.NLD.EU.

The X11 display code is heavily based on the 'sunclock' program by John Mackin <john@cs.su.oz.AU>.