MooseX::Types.3pm

Langue: en

Version: 2009-03-06 (fedora - 05/07/09)

Section: 3 (Bibliothèques de fonctions)

NAME

MooseX::Types - Organise your Moose types in libraries

SYNOPSIS


Library Definition

   package MyLibrary;
 
   # predeclare our own types
   use MooseX::Types 
     -declare => [qw(
         PositiveInt NegativeInt
         ArrayRefOfPositiveInt ArrayRefOfAtLeastThreeNegativeInts
         LotsOfInnerConstraints StrOrArrayRef
     )];
 
   # import builtin types
   use MooseX::Types::Moose 'Int';
 
   # type definition.
   subtype PositiveInt, 
       as Int, 
       where { $_ > 0 },
       message { "Int is not larger than 0" };
   
   subtype NegativeInt,
       as Int,
       where { $_ < 0 },
       message { "Int is not smaller than 0" };
 
   # type coercion
   coerce PositiveInt,
       from Int,
           via { 1 };
 
   # with parameterized constraints.
   
   subtype ArrayRefOfPositiveInt,
     as ArrayRef[PositiveInt];
     
   subtype ArrayRefOfAtLeastThreeNegativeInts,
     as ArrayRef[NegativeInt],
     where { scalar(@$_) > 2 };
 
   subtype LotsOfInnerConstraints,
     as ArrayRef[ArrayRef[HashRef[Int]]];
     
   # with TypeConstraint Unions
   
   subtype StrOrArrayRef,
     as Str|ArrayRef;
 
   1;
 
 

Usage

   package Foo;
   use Moose;
   use MyLibrary qw( PositiveInt NegativeInt );
 
   # use the exported constants as type names
   has 'bar',
       isa    => PositiveInt,
       is     => 'rw';
   has 'baz',
       isa    => NegativeInt,
       is     => 'rw';
 
   sub quux {
       my ($self, $value);
 
       # test the value
       print "positive\n" if is_PositiveInt($value);
       print "negative\n" if is_NegativeInt($value);
 
       # coerce the value, NegativeInt doesn't have a coercion
       # helper, since it didn't define any coercions.
       $value = to_PositiveInt($value) or die "Cannot coerce";
   }
 
   1;
 
 

DESCRIPTION

The types provided with Moose are by design global. This package helps you to organise and selectively import your own and the built-in types in libraries. As a nice side effect, it catches typos at compile-time too.

However, the main reason for this module is to provide an easy way to not have conflicts with your type names, since the internal fully qualified names of the types will be prefixed with the library's name.

This module will also provide you with some helper functions to make it easier to use Moose types in your code.

TYPE HANDLER FUNCTIONS


$type


$type

A constant with the name of your type. It contains the type's fully qualified name. Takes no value, as all constants.

is_$type

This handler takes a value and tests if it is a valid value for this $type. It will return true or false.

to_$type

A handler that will take a value and coerce it into the $type. It will return a false value if the type could not be coerced.

Important Note: This handler will only be exported for types that can do type coercion. This has the advantage that a coercion to a type that cannot hasn't defined any coercions will lead to a compile-time error.

LIBRARY DEFINITION

A MooseX::Types is just a normal Perl module. Unlike Moose itself, it does not install "use strict" and "use warnings" in your class by default, so this is up to you.

The only thing a library is required to do is

   use MooseX::Types -declare => \@types;
 
 

with @types being a list of types you wish to define in this library. This line will install a proper base class in your package as well as the full set of handlers for your declared types. It will then hand control over to Moose::Util::TypeConstraints' "import" method to export the functions you will need to declare your types.

If you want to use Moose' built-in types (e.g. for subtyping) you will want to

   use MooseX::Types::Moose @types;
 
 

to import the helpers from the shipped MooseX::Types::Moose library which can export all types that come with Moose.

You will have to define coercions for your types or your library won't export a ``to_$type'' coercion helper for it.

Note that you currently cannot define types containing "::", since exporting would be a problem.

You also don't need to use "warnings" and "strict", since the definition of a library automatically exports those.

LIBRARY USAGE

You can import the ``type helpers'' of a library by "use"ing it with a list of types to import as arguments. If you want all of them, use the ":all" tag. For example:
   use MyLibrary      ':all';
   use MyOtherLibrary qw( TypeA TypeB );
 
 

MooseX::Types comes with a library of Moose' built-in types called MooseX::Types::Moose.

The exporting mechanism is, since version 0.5, implemented via a wrapper around Sub::Exporter. This means you can do something like this:

   use MyLibrary TypeA => { -as => 'MyTypeA' },
                 TypeB => { -as => 'MyTypeB' };
 
 

WRAPPING A LIBRARY

You can define your own wrapper subclasses to manipulate the behaviour of a set of library exports. Here is an example:
   package MyWrapper;
   use strict;
   use Class::C3;
   use base 'MooseX::Types::Wrapper';
 
   sub coercion_export_generator {
       my $class = shift;
       my $code = $class->next::method(@_);
       return sub {
           my $value = $code->(@_);
           warn "Coercion returned undef!"
               unless defined $value;
           return $value;
       };
   }
 
   1;
 
 

This class wraps the coercion generator (e.g., "to_Int()") and warns if a coercion returned an undefined value. You can wrap any library with this:

   package Foo;
   use strict;
   use MyWrapper MyLibrary => [qw( Foo Bar )],
                 Moose     => [qw( Str Int )];
 
   ...
   1;
 
 

The "Moose" library name is a special shortcut for MooseX::Types::Moose.

Generator methods you can overload

type_export_generator( $short, $full )
Creates a closure returning the type's Moose::Meta::TypeConstraint object.
check_export_generator( $short, $full, $undef_message )
This creates the closure used to test if a value is valid for this type.
coercion_export_generator( $short, $full, $undef_message )
This is the closure that's doing coercions.

Provided Parameters

$short
The short, exported name of the type.
$full
The fully qualified name of this type as Moose knows it.
$undef_message
A message that will be thrown when type functionality is used but the type does not yet exist.

RECURSIVE SUBTYPES

As of version 0.08, Moose::Types has experimental support for Recursive subtypes. This will allow:
     subtype Tree() => as HashRef[Str|Tree];
 
 

Which validates things like:

     {key=>'value'};
     {key=>{subkey1=>'value', subkey2=>'value'}}
 
 

And so on. This feature is new and there may be lurking bugs so don't be afraid to hunt me down with patches and test cases if you have trouble.

NOTES REGARDING TYPE UNIONS

MooseX::Types uses MooseX::Types::TypeDecorator to do some overloading which generally allows you to easily create union types:
   subtype StrOrArrayRef,
     as Str|ArrayRef;
 
 

As with parameterized constrains, this overloading extends to modules using the types you define in a type library.

     use Moose;
     use MooseX::Types::Moose qw(HashRef Int);
     
     has 'attr' => (isa=>HashRef|Int);
 
 

And everything should just work as you'd think.

METHODS


import

Installs the MooseX::Types::Base class into the caller and exports types according to the specification described in ``LIBRARY DEFINITION''. This will continue to Moose::Util::TypeConstraints' "import" method to export helper functions you will need to declare your types.

type_export_generator

Generate a type export, e.g. "Int()". This will return either a Moose::Meta::TypeConstraint object, or alternatively a MooseX::Types::UndefinedType object if the type was not yet defined.

create_arged_type_constraint ($name, @args)


create_arged_type_constraint ($name, @args)

Given a String $name with @args find the matching typeconstraint and parameterize it with @args.

create_base_type_constraint ($name)

Given a String $name, find the matching typeconstraint.

create_type_decorator ($type_constraint)

Given a $type_constraint, return a lightweight MooseX::Types::TypeDecorator instance.

coercion_export_generator

This generates a coercion handler function, e.g. "to_Int($value)".

check_export_generator

Generates a constraint check closure, e.g. "is_Int($value)".

CAVEATS

The following are lists of gotcha's and their workarounds for developers coming from the standard string based type constraint names

Uniqueness

A library makes the types quasi-unique by prefixing their names with (by default) the library package name. If you're only using the type handler functions provided by MooseX::Types, you shouldn't ever have to use a type's actual full name.

Argument separation ('=>' versus ',')

The Perlop manpage has this to say about the '=>' operator: ``The => operator is a synonym for the comma, but forces any word (consisting entirely of word characters) to its left to be interpreted as a string (as of 5.001). This includes words that might otherwise be considered a constant or function call.''

Due to this stringification, the following will NOT work as you might think:

   subtype StrOrArrayRef => as Str|ArrayRef;
 
 

The 'StrOrArrayRef' will have it's stringification activated this causes the subtype to not be created. Since the bareword type constraints are not strings you really should not try to treat them that way. You will have to use the ',' operator instead. The author's of this package realize that all the Moose documention and examples nearly uniformly use the '=>' version of the comma operator and this could be an issue if you are converting code.

Patches welcome for discussion.

Compatibility with Sub::Exporter

If you want to use Sub::Exporter with a Type Library, you need to make sure you export all the type constraints declared AS WELL AS any additional export targets. For example if you do:

     package TypeAndSubExporter; {
         
         use MooseX::Types::Moose qw(Str);
         use MooseX::Types -declare => [qw(MyStr)];
         use Sub::Exporter -setup => { exports => [ qw(something) ] };
         
         subtype MyStr,
          as Str;
          
         sub something {
             return 1;
         }    
         
     } 1;
     
     package Foo; {
         use TypeAndSubExporter qw(MyStr);
     } 1;
 
 

You'll get a '``MyStr'' is not exported by the TypeAndSubExporter module' error. Upi can workaround by:

         - use Sub::Exporter -setup => { exports => [ qw(something) ] };
         + use Sub::Exporter -setup => { exports => [ qw(something MyStr) ] };
 
 

This is a workaround and I am exploring how to make these modules work better together. I realize this workaround will lead a lot of duplication in your export declarations and will be onerous for large type libraries. Patches and detailed test cases welcome. See the tests directory for a start on this.

SEE ALSO

Moose, Moose::Util::TypeConstraints, MooseX::Types::Moose, Sub::Exporter Robert 'phaylon' Sedlacek "<rs@474.at>", with many thanks to the "#moose" cabal on "irc.perl.org".

Additional features by John Napiorkowski (jnapiorkowski) <jjnapiork@cpan.org>.

LICENSE

This program is free software; you can redistribute it and/or modify it under the same terms as perl itself.

POD ERRORS

Hey! The above document had some coding errors, which are explained below:
Around line 263:
You forgot a '=back' before '=head1'