Linux Certif

Toute la documentation sur la certification Linux LPI

Net::Radius::Packet.3pm

NAME

Net::Radius::Packet - Object-oriented Perl interface to RADIUS packets

SYNOPSIS

   use Net::Radius::Packet;
   use Net::Radius::Dictionary;
 
   my $d = new Net::Radius::Dictionary "/etc/radius/dictionary";
 
   my $p = new Net::Radius::Packet $d, $data;
   $p->dump;
 
   if ($p->attr('User-Name' eq "lwall") {
     my $resp = new Net::Radius::Packet $d;
     $resp->set_code('Access-Accept');
     $resp->set_identifier($p->identifier);
     $resp->set_authenticator($p->authenticator);
     $resp->set_attr('Reply-Message' => "Welcome, Larry!\r\n");
     my $respdat = auth_resp($resp->pack, "mysecret");
     ...
 
   die "Packet is a fake response\n" if ($p->code eq 'Access-Accept'
     and not auth_req_verify($data, $secret, $req->authenticator))
 
   die "Packet is a fake\n" if ($p->code eq 'Accounting-Request'
     and not auth_acct_verify($data, $secret))
 
 

DESCRIPTION

RADIUS (RFC2138) specifies a binary packet format which contains various values and attributes. Net::Radius::Packet provides an interface to turn RADIUS packets into Perl data structures and vice-versa.

Net::Radius::Packet does not provide functions for obtaining RADIUS packets from the network. A simple network RADIUS server is provided as an example at the end of this document.

PACKAGE METHODS

new Net::Radius::Packet $dictionary, $data

Returns a new Net::Radius::Packet object. $dictionary is an optional reference to a Net::Radius::Dictionary object. If not supplied, you must call set_dict.

If $data is supplied, unpack will be called for you to initialize the object.

Proxy-State, RFC specification

From RFC-2865:

   2. Operation
   
   If any Proxy-State attributes were present in the Access-Request,
   they MUST be copied unmodified and in order into the response packet.
   Other Attributes can be placed before, after, or even between the
   Proxy-State attributes.
   
   2.3 Proxy
   
   The forwarding server MUST treat any Proxy-State attributes already
   in the packet as opaque data.  Its operation MUST NOT depend on the
   content of Proxy-State attributes added by previous servers.
   
   If there are any Proxy-State attributes in the request received from
   the client, the forwarding server MUST include those Proxy-State
   attributes in its reply to the client.  The forwarding server MAY
   include the Proxy-State attributes in the access-request when it
   forwards the request, or MAY omit them in the forwarded request.  If
   the forwarding server omits the Proxy-State attributes in the
   forwarded access-request, it MUST attach them to the response before
   sending it to the client.
 
 

Proxy-State, Implementation

"->pack()" and "->dump()" now work properly with multiple atributes, in particular the Proxy-State attribute - This means that the packet will be encoded with the multiple attributes present. This change makes Net::Radius::PacketOrdered likely redundant.

"->attr()" method always return the last attribute inserted.

"->set_attr()" and "->set_vsattr()" methods push either the attribute or the vendor-specific attribute, onto the Attributes stack, or overwrites it in specific circumnstances, as described in method documentation. The "->unset_attr()" and "->unset_vsattr()" perform the opposite function.

OBJECT METHODS

There are actually two families of object methods. The ones described below deal with standard RADIUS attributes. An additional set of methods handle the Vendor-Specific attributes as defined in the RADIUS protocol. Those methods behave in much the same way as the ones below with the exception that the prefix vs must be applied before the attr in most of the names. The vendor code must also be included as the first parameter of the call.

The vsattr and set_vsattr methods, used to query and set Vendor-Specific attributes return an array reference with the values of each instance of the particular attribute in the packet. This difference is required to support multiple VSAs with different parameters in the same packet.

->set_dict($dictionary)

Net::Radius::Packet needs access to a Net::Radius::Dictionary object to do packing and unpacking. set_dict must be called with an appropriate dictionary reference (see Net::Radius::Dictionary) before you can use ->pack or ->unpack.

->unpack($data)

Given a raw RADIUS packet $data, unpacks its contents so that they can be retrieved with the other methods (code, attr, etc.).

->pack

Returns a raw RADIUS packet suitable for sending to a RADIUS client or server.

->code

Returns the Code field as a string. As of this writing, the following codes are defined:

         Access-Request          Access-Accept
         Access-Reject           Accounting-Request
         Accounting-Response     Access-Challenge
         Status-Server           Status-Client
 
 

->set_code($code)

Sets the Code field to the string supplied.

->identifier()

Returns the one-byte Identifier used to match requests with responses, as a character value.

->set_identifier($id)

Sets the Identifier byte to the character supplied.

->authenticator()

Returns the 16-byte Authenticator field as a character string.

->set_authenticator($authenticator)

Sets the Authenticator field to the character string supplied.

->attr($name)

Retrieves the value of the named Attribute. Attributes will be converted automatically based on their dictionary type:

         STRING     Returned as a string.
         INTEGER    Returned as a Perl integer.
         IPADDR     Returned as a string (a.b.c.d)
         TIME       Returned as an integer
 
 

The following types are simply mapped to other types until correct encoding is implemented:

ipv6addr

Treated as a string

date

Treated as a string

ifid

Treated as a string

When multiple attributes are inserted in the packet, the last one is returned.

->set_attr($name, $val, $rewrite_flag)

Sets the named Attributes to the given value. Values should be supplied as they would be returned from the attr method. If rewrite_flag is set, and a single attribute with such name already exists on the Attributes stack, its value will be overwriten with the supplied one. In all other cases (if there are more than one attributes with such name already on the stack, there are no attributes with such name, rewrite_flag is omitted) name/pair array will be pushed onto the stack.

->set_vsattr($vendor, $name, $val, $rewrite_flag)

Analogous to "->set_attr()", but operates on vendor-specific attributes for vendor $vendor.

->unset_attr($name)

Sets the named Attribute to the given value. Values should be supplied as they would be returned from the attr method.

->unset_vsattr($vendor, $name)

Analogous to "->unset_attr()", but operates on vendor-specific attributes for vendor $vendor.

->attr_slot($integer)

Deprecated synonym for "->attr_slot_val()".

->attr_slots()

Return the number of attribute slots in the packet.

->attr_slot_name($integer)

Retrieves the attribute name of the given slot number from the Attributes stack. Returns undef when the slot is vacant.

->attr_slot_val($integer)

Retrieves the attribute value of the given slot number from the Attributes stack. Returns undef when the slot is vacant.

->unset_attr_slot($integer)

Removes given stack position from the Attributes stack.

->password($secret, [$attr])

The RADIUS User-Password attribute is encoded with a shared secret. Use this method to return the decoded version. By default, the password will be looked for in the User-Password attribute. You can specify an alternate RADIUS attribute, by using the second argument.

->set_password($passwd, $secret, [$attribute])

The RADIUS User-Password attribute is encoded with a shared secret. Use this method to prepare the encoded version. The encoded password will be stored in the attribute $attribute, which defaults to 'User-Password'.

Some servers have been reported on insisting on this attribute to be 'Password' instead. You may have to tweak this call or the dictionary accordingly.

->dump()

Prints the content of the packet to STDOUT.

->show_unknown_entries($bool)

Controls the generation of a "warn()" whenever an unknown tuple is seen.

EXPORTED SUBROUTINES

auth_resp($packed_packet, $secret)

Given a (packed) RADIUS packet and a shared secret, returns a new packet with the Authenticator field changed in accordace with RADIUS protocol requirements.

auth_acct_verify($packet, $secret)

Verifies the authenticator in an Accounting-Request packet as explained in RFC-2866. Returns 1 if the authenticator matches the packet and the secret, undef otherwise.

$packet is the packet data, as received. $secret is the corresponding shared secret.

auth_req_verify($packet, $secret, $prev_auth)

Verifies the authenticator in Access-Accept, Access-Reject, and Access-Challenge packets as explained in RFC-2865. Returns 1 if the authenticator matches the packet and the secret, undef otherwise.

$packet is the packet data, as received. $secret is the corresponding shared secret. $prev_auth is the authenticator taken from the corresponding Access-Accept packet.

It's the application's job to keep track of the authenticators in each request.

EXAMPLE

See the examples included in the examples/ directory of the distribution. Also see Net::Radius::Server(3) for a more complete implementation of a RADIUS server.

AUTHOR

Christopher Masto, <chris@netmonger.net>. VSA support by Luis E. MuA~Xoz, <luismunoz@cpan.org>. Fix for unpacking 3COM VSAs contributed by Ian Smith <iansmith@ncinter.net>. Information for packing of 3Com VSAs provided by Quan Choi <Quan_Choi@3com.com>. Some functions contributed by Tony Mountifield <tony@mountifield.org>. Attribute ordering provided by Toni Prug, <toni@irational.org>, idea by Bill Hulley.

SEE ALSO

Perl, Net::Radius::Server(3), Net::Radius::Dictionary(3), RFCs 2865, 2866, 2882 and 3575.