Rechercher une page de manuel
SNMP::Info::Airespace.3pm
Langue: en
Version: 2009-06-12 (fedora - 01/12/10)
Section: 3 (Bibliothèques de fonctions)
Sommaire
- NAME
- AUTHOR
- SYNOPSIS
- DESCRIPTION
- GLOBALS
- TABLE METHODS
- Dot11 Ess Table (bsnDot11EssTable)
- AP Table (bsnAPTable)
- AP Interface Table (bsnAPIfTable)
- Mobile Station Table (bsnMobileStationTable)
- Users Table (bsnUsersTable)
- Black List Client Table (bsnBlackListClientTable)
- AP Interface WLAN Override Table (bsnAPIfWlanOverrideTable)
- Interface Config Table (agentInterfaceConfigTable)
- Port Config Table (agentPortConfigTable)
- Overrides
- Pseudo ENTITY-MIB information
NAME
SNMP::Info::Airespace - SNMP Interface to data from AIRESPACE-WIRELESS-MIB and AIRESPACE-SWITCHING-MIBAUTHOR
Eric MillerSYNOPSIS
my $airespace = new SNMP::Info( AutoSpecify => 1, Debug => 1, DestHost => 'myswitch', Community => 'public', Version => 2 ) or die "Can't connect to DestHost.\n"; my $class = $airespace->class(); print " Using device sub class : $class\n";
DESCRIPTION
SNMP::Info::Airespace is a subclass of SNMP::Info that provides an interface to AIRESPACE-WIRELESS-MIB and AIRESPACE-SWITCHING-MIB. These MIBs are used in Airespace wireless switches, as well as, products from Cisco, Nortel, and Alcatel which are based upon the Airespace platform.The Airespace platform utilizes intelligent wireless switches which control thin access points. The thin access points themselves are unable to be polled for end station information.
This class emulates bridge functionality for the wireless switch. This enables end station MAC addresses collection and correlation to the thin access point the end station is using for communication.
Use or create a subclass of SNMP::Info that inherits this one. Do not use directly.
Inherited Classes
- None.
Required MIBs
- AIRESPACE-WIRELESS-MIB
- AIRESPACE-SWITCHING-MIB
GLOBALS
These are methods that return scalar value from SNMP- $airespace->airespace_type()
- ("agentInventoryMachineType")
- $airespace->airespace_model()
- ("agentInventoryMachineModel")
- $airespace->airespace_serial()
- ("agentInventorySerialNumber")
- $airespace->airespace_maint_ver()
- ("agentInventoryMaintenanceLevel")
- $airespace->airespace_mac()
- ("agentInventoryBurnedInMacAddress")
- $airespace->airespace_os()
- ("agentInventoryOperatingSystem")
- $airespace->airespace_vendor()
- ("agentInventoryManufacturerName")
- $airespace->airespace_prod_name()
- ("agentInventoryProductName")
- $airespace->os_ver()
- ("agentInventoryProductVersion")
- $airespace->airespace_bssid_mode()
- ("agentNetworkBroadcastSsidMode")
- $airespace->airespace_mc_mode()
- ("agentNetworkMulticastMode")
- $airespace->airespace_lwapp_mode()
- The LWAPP transport mode decides if the switch is operating in the Layer2 or Layer3 mode.
("agentSwitchLwappTransportMode")
- $airespace->airespace_ul_mode()
- Transfer upload mode configures the mode to use when uploading from the switch. Normal usage tftp.
("agentTransferUploadMode")
- $airespace->airespace_ul_ip()
- Transfer upload tftp server ip configures the IP address of the server. It is valid only when the Transfer Mode is tftp.
("agentTransferUploadServerIP")
- $airespace->airespace_ul_path()
- Transfer upload tftp path configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.
("agentTransferUploadPath")
- $airespace->airespace_ul_file()
- ("agentTransferUploadFilename")
- $airespace->airespace_ul_type()
- Transfer upload datatype configures the type of file to upload from the switch.
The types for upload are: config(2) errorlog(3) systemtrace(4) traplog(5) crashfile(6)
("agentTransferUploadDataType")
- $airespace->airespace_ul_start()
- ("agentTransferUploadStart")
- $airespace->airespace_ul_status()
- ("agentTransferUploadStatus")
Overrides
- $airespace->layers()
- Returns 00000011. Class emulates Layer 2 functionality for Thin APs through proprietary MIBs.
- $airespace->serial()
- ("agentInventorySerialNumber")
TABLE METHODS
These are methods that return tables of information in the form of a reference to a hash.- $airespace->i_ssidlist()
- Returns reference to hash. SSID's recognized by the radio interface.
- $airespace->i_ssidbcast()
- Returns reference to hash. Indicates whether the SSID is broadcast.
- $airespace->i_80211channel()
- Returns reference to hash. Current operating frequency channel of the radio interface.
Dot11 Ess Table (bsnDot11EssTable)
Ess(WLAN) Configuration Table. Maximum of 17 WLANs can be created on Airespace Switch. Index of 17 is reserved for WLAN for Third Party APs(non-Airespace APs).- $airespace->airespace_ess_idx()
- ("bsnDot11EssIndex")
- $airespace->airespace_ess_ssid()
- SSID assigned to ESS(WLAN)
("bsnDot11EssSsid")
- $airespace->airespace_ess_macflt()
- Select to filter clients by MAC address. By selecting this Security, you need to create MAC Filters in "bsnUsersTable" or have MAC Filters configured on Radius Servers specified in "bsnRadiusAuthenticationTable"
("bsnDot11EssMacFiltering")
- $airespace->airespace_ess_status()
- Administrative Status of ESS(WLAN).
("bsnDot11EssAdminStatus")
- $airespace->airespace_ess_sec_auth()
- Type of 802.11 Authentication.
("bsnDot11EssSecurityAuthType")
- $airespace->airespace_ess_radio_pol()
- Radio Policy for a WLAN. It can either be All where it will be applicable to ALL types of protocols or it can be set to apply to combinations of 802.11a, 802.11b, 802.11g.
("bsnDot11EssRadioPolicy")
- $airespace->airespace_ess_qos()
- Quality of Service for a WLAN.
("bsnDot11EssQualityOfService")
- $airespace->airespace_ess_ifname()
- Name of the interface used by this WLAN.
("bsnDot11EssInterfaceName")
- $airespace->airespace_ess_aclname()
- Name of ACL for the WLAN. This is applicable only when Web Authentication is enabled.
("bsnDot11EssAclName")
AP Table (bsnAPTable)
Table of Airespace APs managed by this Airespace Switch.- $airespace->airespace_ap_mac()
- The MAC address of the 802.3 interface of the AP.
("bsnAPDot3MacAddress")
- $airespace->airespace_ap_name()
- Name assigned to this AP. If an AP is not configured its factory default name will be ap:<last three byte of MAC Address>. e.g. ap:af:12:be
("bsnAPName")
- $airespace->airespace_ap_ip()
- Ip address of the AP. This will not be available when the switch is operating in the Layer2 mode. In this case, the attribute will return 0 as value.
("bsnApIpAddress")
- $airespace->airespace_ap_loc()
- User specified location of this AP.
("bsnAPLocation")
- $airespace->airespace_ap_sw()
- ("bsnAPSoftwareVersion")
- $airespace->airespace_ap_fw()
- ("bsnAPBootVersion")
- $airespace->airespace_ap_model()
- ("bsnAPModel")
- $airespace->airespace_ap_serial()
- ("bsnAPSerialNumber")
- $airespace->airespace_ap_type()
- ("bsnAPType")
- $airespace->airespace_ap_status()
- ("bsnAPAdminStatus")
AP Interface Table (bsnAPIfTable)
Table of 802.11 interfaces in an Airespace APs.- $airespace->airespace_apif_slot()
- The slot Id of this interface. Value will be 0 for a 802.11a (5Ghz) interface and will be 1 for 802.11b/g (2.4Ghz) interface.
("bsnAPIfSlotId")
- $airespace->airespace_apif_type()
- ("bsnAPIfType")
- $airespace->airespace_apif_ch_num()
- ("bsnAPIfPhyChannelNumber")
- $airespace->airespace_apif_power()
- The transmit power level N currently being used to transmit data.
("bsnAPIfPhyTxPowerLevel")
- $airespace->airespace_apif()
- ("bsnAPIfOperStatus")
- $airespace->airespace_apif_oride()
- This flag when disabled implies that all WLANs are available from this radio. However, if this is enabled, then only those WLANs that appear in the ("bsnApIfWlanOverrideTable") will be available from this radio.
("bsnAPIfWlanOverride")
- $airespace->airespace_apif_admin()
- ("bsnAPIfAdminStatus")
Mobile Station Table (bsnMobileStationTable)
- $airespace->airespace_sta_mac()
- Mac Address of the AP on which Mobile Station is associated.
("bsnMobileStationAPMacAddr")
- $airespace->airespace_sta_slot()
- Slot Id of AP If on which mobile station is associated.
("bsnMobileStationAPIfSlotId")
- $airespace->airespace_sta_ess_idx()
- Ess Index of the Wlan(SSID) that is being used by Mobile Station to connect to the AP.
("bsnMobileStationEssIndex")
- $airespace->airespace_sta_ssid()
- The SSID Advertised by the Mobile Station.
("bsnMobileStationSsid")
- $airespace->airespace_sta_delete()
- Action to Deauthenticate the Mobile Station. Set the State to delete.
("bsnMobileStationDeleteAction")
Users Table (bsnUsersTable)
The (conceptual) table listing Wlan Users.- $airespace->airespace_user_name()
- User name. For MAC filters, this will be the MAC address (e.g. 000123456789).
("bsnUserName")
- $airespace->airespace_user_pw()
- User Password. For MAC filters, this will be ``nopassword''.
("bsnUserPassword")
- $airespace->airespace_user_ess_idx()
- User WLAN ID. Value 0 implies that this applies to any WLAN ID.
("bsnUserEssIndex")
- $airespace->airespace_user_access()
- For MAC filters, this will be ``readOnly''.
("bsnUserAccessMode")
- $airespace->airespace_user_type()
- User Access Mode. For MAC filters, this will be ``macFilter''.
("bsnUserType")
- $airespace->airespace_user_ifname()
- ACL for MAC Filters. An interface name from "agentInterfaceConfigTable"
("bsnUserInterfaceName")
- $airespace->airespace_user_rstat()
- ("bsnUserRowStatus")
Black List Client Table (bsnBlackListClientTable)
The table listing Wlan Black Listed Clients- $airespace->airespace_bl_mac()
- ("bsnBlackListClientMacAddress")
- $airespace->airespace_bl_descr()
- ("bsnBlackListClientDescription")
- $airespace->airespace_bl_rstat()
- ("bsnBlackListClientRowStatus")
AP Interface WLAN Override Table (bsnAPIfWlanOverrideTable)
Each entry represents an SSID added to the AP when the attribute "bsnAPIfWlanOverride" on the radio is enabled. This means only those WLANs on the switch that are added to this table will be available on such a radio.- $airespace->airespace_oride_id()
- Index of the WLAN ("bsnDot11EssIndex") added to the radio.
("bsnAPIfWlanOverrideId")
- $airespace->airespace_oride_ssid()
- SSID assigned to the override WLAN.
("bsnAPIfWlanOverrideSsid")
Interface Config Table (agentInterfaceConfigTable)
A table of the switch's Interface Config entries. Typically, it will contain entries for Service Port Interface, DS Port Interface and Virtual GatewayInterface apart from other entries.
- $airespace->airespace_if_name()
- Interface Name. This values is 'management' for DS port, 'service-port' for service port and 'virtual' for virtual gateway. For other interfaces, the name can be anything. These interfaces are already created by default.
("agentInterfaceName")
- $airespace->airespace_if_vlan()
- VLAN Id configured for the Interface.
("agentInterfaceVlanId")
- $airespace->airespace_if_type()
- The interface's type. The static type is set for the interfaces that are created by default on the switch and these cannot be deleted. Any other interface that is created is of type dynamic which can be deleted.
("agentInterfaceType")
- $airespace->airespace_if_mac()
- Interface MAC Address. This is only applicable in case of management and service-port interfaces.
("agentInterfaceMacAddress")
- $airespace->airespace_if_ip()
- ("agentInterfaceIPAddress")
- $airespace->airespace_if_mask()
- ("agentInterfaceIPNetmask")
- $airespace->airespace_if_acl()
- Name of the Access Control List applied to the interface. This attribute is applicable only to the management interface and other dynamic interfaces. If it is required to remove the ACL name for an interface, it should be set to an empty string.
("agentInterfaceAclName")
- $airespace->airespace_if_rstat()
- ("agentInterfaceRowStatus")
Port Config Table (agentPortConfigTable)
- $airespace->airespace_duplex_admin()
- ("agentPortPhysicalMode")
- $airespace->airespace_duplex()
- ("agentPortPhysicalStatus")
Overrides
- $airespace->i_index()
- Returns reference to map of IIDs to Interface index.
Extends "ifIndex" to support thin APs and WLAN virtual interfaces as device interfaces.
- $airespace->interfaces()
- Returns reference to map of IIDs to ports. Thin APs are implemented as device interfaces. The thin AP MAC address airespace_ap_mac() and Slot ID airespace_apif_slot() are used as the port identifier. Virtual interfaces use airespace_if_name() as the port identifier.
- $airespace->i_name()
- Returns reference to map of IIDs to interface names. Returns "ifName" for Ethernet interfaces, airespace_ap_name() for thin AP interfaces, and airespace_if_name() for virtual interfaces.
- $airespace->i_description()
- Returns reference to map of IIDs to interface types. Returns "ifDescr" for Ethernet interfaces, airespace_ap_loc() for thin AP interfaces, and airespace_if_name() for virtual interfaces.
- $airespace->i_type()
- Returns reference to map of IIDs to interface descriptions. Returns "ifType" for Ethernet interfaces, airespace_apif_type() for thin AP interfaces, and airespace_if_type() for virtual interfaces.
- $airespace->i_up()
- Returns reference to map of IIDs to link status of the interface. Returns "ifOperStatus" for Ethernet interfaces and airespace_apif() for thin AP interfaces.
- $airespace->i_up_admin()
- Returns reference to map of IIDs to administrative status of the interface. Returns "ifAdminStatus" for Ethernet interfaces and airespace_apif_admin() for thin AP interfaces.
- $airespace->i_mac()
- Returns reference to map of IIDs to MAC address of the interface. Returns "ifPhysAddress" for Ethernet interfaces and airespace_if_mac() for virtual interfaces.
- $airespace->i_vlan()
- Returns reference to map of IIDs to VLAN ID of the interface. Returns airespace_if_vlan() for virtual interfaces.
- $airespace->i_duplex()
- Returns reference to map of IIDs to current link duplex. Ethernet interfaces only.
- $airespace->i_duplex_admin()
- Returns reference to hash of IIDs to admin duplex setting. Ethernet interfaces only.
- $airespace->ip_index()
- Extends table by mapping airespace_if_ip() to the interface IID.
- $airespace->ip_netmask()
- Extends IP table by mapping airespace_if_mask() to airespace_if_ip()
- $airespace->bp_index()
- Simulates bridge MIB by returning reference to a hash mapping i_index() to the interface iid.
- $airespace->fw_port()
- Returns reference to a hash, value being airespace_sta_mac() and airespace_sta_slot() combined to match the interface iid.
- $airespace->fw_mac()
- ("bsnMobileStationMacAddress")
Pseudo ENTITY-MIB information
These methods emulate ENTITY-MIB Physical Table methods using AIRESPACE-SWITCHING-MIB and AIRESPACE-WIRELESS-MIB. Thin APs are included as subcomponents of the wireless controller.- $airespace->e_index()
- Returns reference to hash. Key: IID and Value: Integer. The index for APs is created with an integer representation of the last three octets of the AP MAC address.
- $airespace->e_class()
- Returns reference to hash. Key: IID, Value: General hardware type. Return ap for wireless access points.
- $airespace->e_descr()
- Returns reference to hash. Key: IID, Value: Human friendly name.
- $airespace->e_model()
- Returns reference to hash. Key: IID, Value: Model name.
- $airespace->e_name()
- More computer friendly name of entity. Name is either 'WLAN Controller' or 'AP'.
- $airespace->e_vendor()
- Returns reference to hash. Key: IID, Value: cisco.
- $airespace->e_serial()
- Returns reference to hash. Key: IID, Value: Serial number.
- $airespace->e_pos()
- Returns reference to hash. Key: IID, Value: The relative position among all entities sharing the same parent.
- $airespace->e_type()
- Returns reference to hash. Key: IID, Value: Type of component.
- $airespace->e_fwver()
- Returns reference to hash. Key: IID, Value: Firmware revision.
- $airespace->e_swver()
- Returns reference to hash. Key: IID, Value: Software revision.
- $airespace->e_parent()
- Returns reference to hash. Key: IID, Value: The value of e_index() for the entity which 'contains' this entity.
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre