SNMP::Info::CiscoVTP.3pm

Langue: en

Version: 2009-06-12 (fedora - 01/12/10)

Section: 3 (Bibliothèques de fonctions)

NAME

SNMP::Info::CiscoVTP - SNMP Interface to Cisco's VLAN Management MIBs

AUTHOR

Max Baker

SYNOPSIS

  # Let SNMP::Info determine the correct subclass for you. 
  my $vtp = new SNMP::Info(
                           AutoSpecify => 1,
                           Debug       => 1,
                           DestHost    => 'myswitch',
                           Community   => 'public',
                           Version     => 2
                         ) 
     or die "Can't connect to DestHost.\n";
 
  my $class = $vtp->class();
  print "SNMP::Info determined this device to fall under subclass : $class\n";
 
 

DESCRIPTION

SNMP::Info::CiscoVTP is a subclass of SNMP::Info that provides information about a Cisco device's VLAN and VTP Domain membership.

Use or create in a subclass of SNMP::Info. Do not use directly.

Inherited Classes

None.

Required MIBs

CISCO-VTP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB

MIBs can be found at ftp://ftp.cisco.com/pub/mibs/v2/v2.tar.gz

GLOBALS

$vtp->vtp_version()
("vtpVersion")
$vtp->vtp_maxstore()
("vtpMaxVlanStorage")
$vtp->vtp_notify()
("vtpNotificationsEnabled")
$vtp->vtp_notify_create()
("vtpVlanCreatedNotifEnabled")
$vtp->vtp_notify_delete()
("vtpVlanDeletedNotifEnabled")
$vtp->vtp_trunk_set_serial()
("vlanTrunkPortSetSerialNo")

TABLE METHODS

Your device will only implement a subset of these methods.
$vtp->i_vlan()
Returns a mapping between "ifIndex" and assigned VLAN ID for access ports and the default VLAN ID for trunk ports.
$vtp->i_vlan_membership()
Returns reference to hash of arrays: key = "ifIndex", value = array of VLAN IDs. These are the VLANs which are members of enabled VLAN list for the port.
   Example:
   my $interfaces = $vtp->interfaces();
   my $vlans      = $vtp->i_vlan_membership();
   
   foreach my $iid (sort keys %$interfaces) {
     my $port = $interfaces->{$iid};
     my $vlan = join(',', sort(@{$vlans->{$iid}}));
     print "Port: $port VLAN: $vlan\n";
   }
 
 

VLAN Table (CISCO-VTP-MIB::vtpVlanTable)

See ftp://ftp.cisco.com/pub/mibs/supportlists/wsc5000/wsc5000-communityIndexing.html <ftp://ftp.cisco.com/pub/mibs/supportlists/wsc5000/wsc5000-communityIndexing.html> for a good treaty of how to connect to the VLANs
$vtp->v_index()
("vtpVlanIndex")
$vtp->v_state()
("vtpVlanState")
$vtp->v_type()
("vtpVlanType")
$vtp->v_name()
("vtpVlanName")
$vtp->v_mtu()
("vtpVlanMtu")
$vtp->v_said()
("vtpVlanDot10Said")
$vtp->v_ring()
("vtpVlanRingNumber")
$vtp->v_bridge()
("vtpVlanBridgeNumber")
$vtp->v_stp()
("vtpVlanStpType")
$vtp->v_parent()
("vtpVlanParentVlan")
$vtp->v_trans1()
("vtpVlanTranslationalVlan1")
$vtp->v_trans2()
("vtpVlanTranslationalVlan2")
$vtp->v_btype()
("vtpVlanBridgeType")
$vtp->v_hop_are()
("vtpVlanAreHopCount")
$vtp->v_hop_ste()
("vtpVlanSteHopCount")
$vtp->v_crf()
("vtpVlanIsCRFBackup")
$vtp->v_type_ext()
("vtpVlanTypeExt")
$vtp->v_if()
("vtpVlanIfIndex")

VLAN Membership Table (CISCO-VLAN-MEMBERSHIP-MIB::vmMembershipTable)

$vtp->i_vlan_type()
Static, Dynamic, or multiVlan.

("vmVlanType")

$vtp->i_vlan2()
The VLAN that an access port is assigned to.

("vmVlan")

$vtp->i_vlan_stat()
Inactive, active, shutdown.

("vmPortStatus")

$vtp->i_vlan_1()
Each bit represents a VLAN. This is 0 through 1023

("vmVlans")

$vtp->i_vlan_2()
Each bit represents a VLAN. This is 1024 through 2047

("vmVlans2k")

$vtp->i_vlan_3()
Each bit represents a VLAN. This is 2048 through 3071

("vmVlans3k")

$vtp->i_vlan_4()
Each bit represents a VLAN. This is 3072 through 4095

("vmVlans4k")

VLAN Membership Voice VLAN Table (CISCO-VLAN-MEMBERSHIP-MIB::vmVoiceVlanTable)

$vtp->i_voice_vlan()
("vmVoiceVlanId")

Management Domain Table (CISCO-VTP-MIB::managementDomainTable)

$vtp->vtp_d_index()
("managementDomainIndex")
$vtp->vtp_d_name()
("managementDomainName")
$vtp->vtp_d_mode()
("managementDomainLocalMode")
$vtp->vtp_d_rev()
("managementDomainConfigRevNumber")
$vtp->vtp_d_updater()
("managementDomainLastUpdater")
$vtp->vtp_d_last()
("managementDomainLastChange")
$vtp->vtp_d_status()
("managementDomainRowStatus")
$vtp->vtp_d_tftp()
("managementDomainTftpServer")
$vtp->vtp_d_tftp_path()
("managementDomainTftpPathname")
$vtp->vtp_d_pruning()
("managementDomainPruningState")
$vtp->vtp_d_ver()
("managementDomainVersionInUse")

VLAN Trunk Port Table (CISCO-VTP-MIB::vlanTrunkPortTable)

$vtp->vtp_trunk_mgmt_dom()
("vlanTrunkPortManagementDomain")
$vtp->vtp_trunk_encaps_t()
("vlanTrunkPortEncapsulationType")
$vtp->vtp_trunk_vlans()
("vlanTrunkPortVlansEnabled")
$vtp->vtp_trunk_vlans_2k()
("vlanTrunkPortVlansEnabled2k")
$vtp->vtp_trunk_vlans_3k()
("vlanTrunkPortVlansEnabled3k")
$vtp->vtp_trunk_vlans_4k()
("vlanTrunkPortVlansEnabled4k")
$vtp->vtp_trunk_native()
("vlanTrunkPortNativeVlan")
$vtp->i_pvid()
("vlanTrunkPortNativeVlan")
$vtp->vtp_trunk_rstat()
("vlanTrunkPortRowStatus")
$vtp->vtp_trunk_dyn()
("vlanTrunkPortDynamicState")
$vtp->vtp_trunk_dyn_stat()
("vlanTrunkPortDynamicStatus")
$vtp->vtp_trunk_vtp()
("vlanTrunkPortVtpEnabled")
$vtp->vtp_trunk_encaps()
("vlanTrunkPortEncapsulationOperType")

SET METHODS

These are methods that provide SNMP set functionality for overridden methods or provide a simpler interface to complex set operations. See ``SETTING DATA VIA SNMP'' in SNMP::Info for general information on set operations.
$vtp->set_i_vlan ( vlan, ifIndex )
Changes an access (untagged) port VLAN, must be supplied with the numeric VLAN ID and port "ifIndex". This method should only be used on end station (non-trunk) ports.
   Example:
   my %if_map = reverse %{$vtp->interfaces()};
   $vtp->set_i_vlan('2', $if_map{'FastEthernet0/1'}) 
     or die "Couldn't change port VLAN. ",$vtp->error(1);
 
 
$vtp->set_i_pvid ( pvid, ifIndex )
Sets port default VLAN, must be supplied with the numeric VLAN ID and port "ifIndex". This method should only be used on trunk ports.
   Example:
   my %if_map = reverse %{$vtp->interfaces()};
   $vtp->set_i_pvid('2', $if_map{'FastEthernet0/1'}) 
     or die "Couldn't change port default VLAN. ",$vtp->error(1);
 
 
$vtp->set_add_i_vlan_tagged ( vlan, ifIndex )
Adds the VLAN to the enabled VLANs list of the port, must be supplied with the numeric VLAN ID and port "ifIndex".
   Example:
   my %if_map = reverse %{$vtp->interfaces()};
   $vtp->set_add_i_vlan_tagged('2', $if_map{'FastEthernet0/1'}) 
     or die "Couldn't add port to egress list. ",$vtp->error(1);
 
 
$vtp->set_remove_i_vlan_tagged ( vlan, ifIndex )
Removes the VLAN from the enabled VLANs list of the port, must be supplied with the numeric VLAN ID and port "ifIndex".
   Example:
   my %if_map = reverse %{$vtp->interfaces()};
   $vtp->set_remove_i_vlan_tagged('2', $if_map{'FastEthernet0/1'}) 
     or die "Couldn't add port to egress list. ",$vtp->error(1);