Vend::Payment::MCVE.3pm

Langue: en

Autres versions - même langue

Version: 2010-03-25 (ubuntu - 24/10/10)

Section: 3 (Bibliothèques de fonctions)

NAME

Vend::Payment::MCVE - Interchange MCVE support

SYNOPSIS

     &charge=mcve
 
         or
 
     [charge mode=mcve param1=value1 param2=value2]
 
         or
 
     mcve($mode, $opt);
 
 

PREREQUISITES

     MCVE.pm
 
 

The MCVE libraries are available free at http://www.mcve.com/

DESCRIPTION

MCVE, Mainstreet Credit Verification Engine is a high performance software application designed to provide quality, in-house, Credit Card processing FROM Linux, FreeBSD, OpenBSD, IBM AIX, Sun Solaris, SCO OpenServer/UnixWare, and Mac OS X platforms to established clearing houses. The MCVE C & Perl library software can be downloaded free of charge from http://mcve.com. This module was developed and tested with the server software installed on HotConnect.net (http://www.hotconnect.net). Hot Connect, Inc. is an Interchange friendly Web Hosting, E-Commerce, and Internet Services company.

The Vend::Payment::MCVE module implements the mcve() routine for use with Interchange. It is compatible on a call level with the other Interchange payment modules.

To enable this module, place this directive in "interchange.cfg":

     Require module Vend::Payment::MCVE
 
 

This must be in interchange.cfg or a file included from it.

Make sure CreditCardAuto is off (default in Interchange demos).

The mode can be named anything, but the "gateway" parameter must be set to "mcve". To make it the default payment gateway for all credit card transactions in a specific catalog, you can set in "catalog.cfg":

     Variable   MV_PAYMENT_MODE  mcve
 
 

It uses several of the standard settings from Interchange payment. Any time we speak of a setting, it is obtained either first from the tag/call options, then from an Interchange order Route named for the mode, then finally a default global payment variable, For example, the "id" parameter would be specified by:

     [charge mode=mcve name=mcve_configname]
 
 

or

     Route mcve name mcve_configname
 
 

or

     Variable MV_PAYMENT_NAME      mcve_configname
 
 

The active settings are:

     Variable   MV_PAYMENT_MODE mcve
     Variable   MV_PAYMENT_NAME mcve_username
     Variable   MV_PAYMENT_PASSWD mcve_password
     Variable   MV_PAYMENT_HOST sv1.carlc.com
     Variable   MV_PAYMENT_PORT 8333
     Variable   MV_PAYMENT_COUNTER etc/mcve_id.counter
     Variable   MV_PAYMENT_COUNTER_START 100
     Variable   MV_PAYMENT_SALE_ON_AUTH 1
     Variable   MV_PAYMENT_NO_SALE_BAD_AVS 0
     Variable   MV_PAYMENT_NO_SALE_BAD_CVV2 0
     Variable   MV_PAYMENT_SUCCESS_ON_ANY 0
 
 
name
Your MCVE configuration username, set up when MCVE was configured/installed on the machine. Global parameter is MV_PAYMENT_NAME.
no_sale_bad_avs
Normally Interchange charge modules do an authorization, and if successful, do a sale. This module is configurable for a different models, where transactions are not automatically saled.
sale_on_auth
The storekeeper may not wish to sale a transaction if the AVS is bad.
success_on_any
Alternatively the storekeeper may wish to cause any transaction to appear to be a successful sale. The storekeeper would have to contact buyers with bad credit card information and manually redo the sale. The motivation is to make sure no one attempts a sale and gives up for any reason. This mode of operation, set with MV_PAYMENT_SUCCESS_ON_ANY is not commonly used.
transaction
The type of transaction to be run. Valid values are:
     Interchange mode    MCVE mode
     ----------------    -----------------
     auth                auth
     sale                sale
 
 

Not supported yet:

     return              return
     reverse             reverse
     void                void
 
 
counter, counter_start
Currently this is not being used, and Interchange is generating id's.
     Route   mcve  counter        etc/mcve_id.counter
     Route   mcve  counter_start  100
 
 

Troubleshooting

Try the instructions above, with a test credit card number from your payment processor.

Then try a sale with the card number "4111 1111 1111 1111" and a valid expiration date. The sale should be denied, and the reason should be in [data session payment_error].

If nothing works:

Make sure you ``Require''d the module in interchange.cfg:

     Require module Vend::Payment::MCVE
 
 

Make sure MCVE is installed and working.

Check the error logs, both catalog and global.

Make sure you set your payment parameters properly.

Try an order, then put this code in a page:

     [calc]
         $Tag->uneval( { ref => $Session->{payment_result} );
     [/calc]
 
 

That should show what happened.

BUGS

There is actually nothing *in* Vend::Payment::MCVE. It changes packages to Vend::Payment and places things there.

AUTHORS

MCVE modifications by tom@readyink.com for Carlc Internet Services

CREDITS

Derived from CCVS.pm template, and others.