Rechercher une page de manuel
ct.4freebsd
Langue: en
Version: 300683 (debian - 07/07/09)
Section: 4 (Pilotes et protocoles réseau)
BSD mandoc
NAME
ct - WD33C93[ABC] based CBUS SCSI host adapter driverSYNOPSIS
device ct device scbusIn /boot/device.hints:
For most PC-9801-55, -92 and compatibles: hint.ct.0.at=isa
For ELECOM bus-master SCSI adapters: hint.ct.0.at=isa hint.ct.0.flags=0x30000
For I-O DATA SC98 adapters: hint.ct.0.at=isa hint.ct.0.flags=0x10000
For LOGITEC adapters: hint.ct.0.at=isa hint.ct.0.flags=0x50000
For TEXA adapters: hint.ct.0.at=isa hint.ct.0.flags=0x20000
For adapters with SMIT transfer mode to enable SMIT transfer: hint.ct.0.at=isa hint.ct.0.flags=0x40000 hint.ct.0.maddr=0xdc000
Flags meaning:
- 0x00000
- DMA transfer mode for an NEC PC-9801-55, -92 (or compatibles), ICM IF-2660, Midori-Denshi MDC-554NA, or Logitec LHA-N151
- 0x10000
- DMA transfer mode for an I-O DATA SC-98II
- 0x20000
- bus-master transfer mode for a TEXA HA-55BS2, its successors, or Midori-Denshi MDC-926R
- 0x30000
- bus-master transfer mode for an ELECOM bus-master SCSI adapter
- 0x40000
- SMIT transfer mode (for supported adapters only)
- 0x50000
- bus-master transfer mode for a Logitec LHA-20x series, ICM IF-2766, IF-2766ET, IF-2767 or IF-2769
DESCRIPTION
The driver provides access to the SCSI bus connected to a WD33C93[ABC] based host adapter.HARDWARE
The driver supports the following adapters:- ELECOM bus-master SCSI adapters
- I-O DATA SC-98II
- ICM IF-2660, IF-2766, IF-2766ET, IF-2767 and IF-2769
- Logitec LHA-N151 and LHA-20x series
- Midori-Denshi MDC-554NA and MDC-926R
- NEC PC-9801-55, 92 and compatibles
- SMIT transfer type SCSI host adapters
- TEXA HA-55BS2 and its later models
SEE ALSO
cd(4), ch(4), ctau(4), da(4), intro(4), sa(4), scsi(4)NOTES
Historically, the driver for the Cronyx Tau WAN adapters was ``ct'' This device name was changed to ``ctau'' to avoid conflicts with this pc98 driver. The network device name for ctau(4) is ``ct '' Please see ctau(4) for the details for that device.HISTORY
The device driver has been developed for Nx Ns /pc98 and ported for Fx . It first appeared in Fx 4.4 .AUTHORS
The driver was written by An Naofumi HONDA .This manual page was written by An -nosplit An Noriaki MITSUNAGA Aq non@FreeBSD.org and An Hideyuki KURASHINA Aq rushani@FreeBSD.org .
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre