Rechercher une page de manuel
hptrr.4freebsd
Langue: en
Version: 300248 (debian - 07/07/09)
Section: 4 (Pilotes et protocoles réseau)
BSD mandoc
NAME
hptrr - HighPoint RocketRAID device driverSYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:device hptrr device scbus device da
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:
hptrr_load="YES"
DESCRIPTION
The driver provides support for HighPoint's RocketRAID based RAID controllers.These devices support SATA/ATA disk drives and provide RAID0 (striping), RAID1 (mirroring), and RAID5 functionality.
HARDWARE
The driver supports the following RAID controllers:- RocketRAID 172x series
- RocketRAID 174x series
- RocketRAID 2210
- RocketRAID 222x series
- RocketRAID 2240
- RocketRAID 230x series
- RocketRAID 231x series
- RocketRAID 232x series
- RocketRAID 2340
- RocketRAID 2522
NOTES
The driver only works on the i386 and amd64 platforms as it requires a binary blob object from the manufacturer which they only supply for these platforms. The driver does not work on i386 with pae(4) enabled.This driver does not support the RR182x series controller. See the hptmv(4) manual page for details on support.
This driver supersedes the older rr232x driver.
SEE ALSO
cam(4), hptmv(4), loader(8)HISTORY
The device driver first appeared in Fx 6.3 .AUTHORS
An -nosplit The device driver was written by An HighPoint Technologies, Inc. , and ported to Fx by An Scott Long . This manual page was written by An David E. O'Brien .BUGS
The driver does not support manipulating the RAID from the OS, RAIDs need to be set up from the on-board BIOS.Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre