sge_pe

Langue: en

Version: $Date: 2009/04/06 15:31:32 $ (fedora - 01/12/10)

Section: 5 (Format de fichier)

NAME

ge_pe - Grid Engine parallel environment configuration file format

DESCRIPTION

Parallel environments are parallel programming and runtime environments allowing for the execution of shared memory or distributed memory parallelized applications. Parallel environments usually require some kind of setup to be operational before starting parallel applications. Examples for common parallel environments are shared memory parallel operating systems and the distributed memory environments Parallel Virtual Machine (PVM) or Message Passing Interface (MPI).

ge_pe allows for the definition of interfaces to arbitrary parallel environments. Once a parallel environment is defined or modified with the -ap or -mp options to and linked with one or more queues via pe_list in the environment can be requested for a job via the -pe switch to together with a request of a range for the number of parallel processes to be allocated by the job. Additional -l options may be used to specify the job requirement to further detail.

Note, Grid Engine allows backslashes (\) be used to escape newline (\newline) characters. The backslash and the newline are replaced with a space (" ") character before any interpretation.

FORMAT

The format of a ge_pe file is defined as follows:

pe_name

The name of the parallel environment as defined for pe_name in To be used in the -pe switch.

slots

The number of parallel processes being allowed to run in total under the parallel environment concurrently. Type is number, valid values are 0 to 9999999.

user_lists

A comma separated list of user access list names (see Each user contained in at least one of the enlisted access lists has access to the parallel environment. If the user_lists parameter is set to NONE (the default) any user has access being not explicitly excluded via the xuser_lists parameter described below. If a user is contained both in an access list enlisted in xuser_lists and user_lists the user is denied access to the parallel environment.

xuser_lists

The xuser_lists parameter contains a comma separated list of so called user access lists as described in Each user contained in at least one of the enlisted access lists is not allowed to access the parallel environment. If the xuser_lists parameter is set to NONE (the default) any user has access. If a user is contained both in an access list enlisted in xuser_lists and user_lists the user is denied access to the parallel environment.

start_proc_args

The invocation command line of a start-up procedure for the parallel environment. The start-up procedure is invoked by prior to executing the job script. Its purpose is to setup the parallel environment correspondingly to its needs. An optional prefix "user@" specifies the user under which this procedure is to be started. The standard output of the start-up procedure is redirected to the file REQNAME.poJID in the job's working directory (see with REQNAME being the name of the job as displayed by and JID being the job's identification number. Likewise, the standard error output is redirected to REQNAME.peJID
The following special variables being expanded at runtime can be used (besides any other strings which have to be interpreted by the start and stop procedures) to constitute a command line:
$pe_hostfile
The pathname of a file containing a detailed description of the layout of the parallel environment to be setup by the start-up procedure. Each line of the file refers to a host on which parallel processes are to be run. The first entry of each line denotes the hostname, the second entry the number of parallel processes to be run on the host, the third entry the name of the queue, and the fourth entry a processor range to be used in case of a multiprocessor machine.
$host
The name of the host on which the start-up or stop procedures are started.
$job_owner
The user name of the job owner.
$job_id
Grid Engine's unique job identification number.
$job_name
The name of the job.
$pe
The name of the parallel environment in use.
$pe_slots
Number of slots granted for the job.
$processors
The processors string as contained in the queue configuration (see of the master queue (the queue in which the start-up and stop procedures are started).
$queue
The cluster queue of the master queue instance.

stop_proc_args

The invocation command line of a shutdown procedure for the parallel environment. The shutdown procedure is invoked by after the job script has finished. Its purpose is to stop the parallel environment and to remove it from all participating systems. An optional prefix "user@" specifies the user under which this procedure is to be started. The standard output of the stop procedure is also redirected to the file REQNAME.poJID in the job's working directory (see with REQNAME being the name of the job as displayed by and JID being the job's identification number. Likewise, the standard error output is redirected to REQNAME.peJID
The same special variables as for start_proc_args can be used to constitute a command line.

allocation_rule

The allocation rule is interpreted by the scheduler thread and helps the scheduler to decide how to distribute parallel processes among the available machines. If, for instance, a parallel environment is built for shared memory applications only, all parallel processes have to be assigned to a single machine, no matter how much suitable machines are available. If, however, the parallel environment follows the distributed memory paradigm, an even distribution of processes among machines may be favorable.
The current version of the scheduler only understands the following allocation rules:
<int>:
An integer number fixing the number of processes per host. If the number is 1, all processes have to reside on different hosts. If the special denominator $pe_slots is used, the full range of processes as specified with the -pe switch has to be allocated on a single host (no matter which value belonging to the range is finally chosen for the job to be allocated).
$fill_up:
Starting from the best suitable host/queue, all available slots are allocated. Further hosts and queues are "filled up" as long as a job still requires slots for parallel tasks.
$round_robin:
From all suitable hosts a single slot is allocated until all tasks requested by the parallel job are dispatched. If more tasks are requested than suitable hosts are found, allocation starts again from the first host. The allocation scheme walks through suitable hosts in a best-suitable-first order.

control_slaves

This parameter can be set to TRUE or FALSE (the default). It indicates whether Grid Engine is the creator of the slave tasks of a parallel application via and and thus has full control over all processes in a parallel application, which enables capabilities such as resource limitation and correct accounting. However, to gain control over the slave tasks of a parallel application, a sophisticated PE interface is required, which works closely together with Grid Engine facilities. Such PE interfaces are available through your local Grid Engine support office.

Please set the control_slaves parameter to false for all other PE interfaces.

job_is_first_task

The job_is_first_task parameter can be set to TRUE or FALSE. A value of TRUE indicates that the Grid Engine job script already contains one of the tasks of the parallel application (the number of slots reserved for the job is the number of slots requested with the -pe switch), while a value of FALSE indicates that the job script (and its child processes) is not part of the parallel program (the number of slots reserved for the job is the number of slots requested with the -pe switch + 1).

If wallclock accounting is used (execd_params ACCT_RESERVED_USAGE and/or SHARETREE_RESERVED_USAGE set to TRUE) and control_slaves is set to FALSE, the job_is_first_task parameter influences the accounting for the job: A value of TRUE means that accounting for cpu and requested memory gets multiplied by the number of slots requested with the -pe switch, if job_is_first_task is set to FALSE, the accounting information gets multiplied by number of slots + 1.

urgency_slots

For pending jobs with a slot range PE request the number of slots is not determined. This setting specifies the method to be used by Grid Engine to assess the number of slots such jobs might finally get.

The assumed slot allocation has a meaning when determining the resource-request-based priority contribution for numeric resources as described in and is displayed when is run without -g t option.

The following methods are supported:

<int>:
The specified integer number is directly used as prospective slot amount.
min:
The slot range minimum is used as prospective slot amount. If no lower bound is specified with the range 1 is assumed.
max:
The of the slot range maximum is used as prospective slot amount. If no upper bound is specified with the range the absolute maximum possible due to the PE's slots setting is assumed.
avg:
The average of all numbers occurring within the job's PE range request is assumed.

accounting_summary

This parameter is only checked if control_slaves (see above) is set to TRUE and thus Grid Engine is the creator of the slave tasks of a parallel application via and In this case, accounting information is available for every single slave task started by Grid Engine.

The accounting_summary parameter can be set to TRUE or FALSE. A value of TRUE indicates that only a single accounting record is written to the file, containing the accounting summary of the whole job including all slave tasks, while a value of FALSE indicates an individual record is written for every slave task, as well as for the master task.
Note: When running tightly integrated jobs with SHARETREE_RESERVED_USAGE set, and with having accounting_summary enabled in the parallel environment, reserved usage will only be reported by the master task of the parallel job. No per parallel task usage records will be sent from execd to qmaster, which can significantly reduce load on qmaster when running large tightly integrated parallel jobs.

RESTRICTIONS

Note, that the functionality of the start-up, shutdown and signaling procedures remains the full responsibility of the administrator configuring the parallel environment. Grid Engine will just invoke these procedures and evaluate their exit status. If the procedures do not perform their tasks properly or if the parallel environment or the parallel application behave unexpectedly, Grid Engine has no means to detect this.

SEE ALSO

See for a full statement of rights and permissions.