Rechercher une page de manuel
slurm.conf
Langue: en
Version: 362355 (ubuntu - 24/10/10)
Section: 5 (Format de fichier)
Sommaire
NAME
slurm.conf - Slurm configuration fileDESCRIPTION
/etc/slurm.conf is an ASCII file which describes general SLURM configuration information, the nodes to be managed, information about how those nodes are grouped into partitions, and various scheduling parameters associated with those partitions. This file should be consistent across all nodes in the cluster.The file location can be modified at system build time using the DEFAULT_SLURM_CONF parameter. In addition, you can use the SLURM_CONF environment variable to override the built-in location of this file. The SLURM daemons also allow you to override both the built-in and environment-provided location using the "-f" option on the command line.
Note the while SLURM daemons create log files and other files as needed, it treats the lack of parent directories as a fatal error. This prevents the daemons from running if critical file systems are not mounted and will minimize the risk of cold-starting (starting without preserving jobs).
The contents of the file are case insensitive except for the names of nodes and partitions. Any text following a "#" in the configuration file is treated as a comment through the end of that line. The size of each line in the file is limited to 1024 characters. Changes to the configuration file take effect upon restart of SLURM daemons, daemon receipt of the SIGHUP signal, or execution of the command "scontrol reconfigure" unless otherwise noted.
If a line begins with the word "Include" followed by whitespace and then a file name, that file will be included inline with the current configuration file.
Note on file permissions:
The slurm.conf file must be readable by all users of SLURM, since it is used by many of the SLURM commands. Other files that are defined in the slurm.conf file, such as log files and job accounting files, may need to be created/owned by the "SlurmUser" uid to be successfully accessed. Use the "chown" and "chmod" commands to set the ownership and permissions appropriately. See the section FILE AND DIRECTORY PERMISSIONS for information about the various files and directories used by SLURM.
PARAMETERS
The overall configuration parameters available include:
- AccountingStorageBackupHost
- The name of the backup machine hosting the accounting storage database. If used with the accounting_storage/slurmdbd plugin, this is where the backup slurmdbd would be running. Only used for database type storage plugins, ignored otherwise.
- AccountingStorageEnforce
- This controls what level of enforcement you want on associations when new jobs are submitted. Valid options are any combination of associations, limits, and wckeys, or all for all things. If limits is set associations is implied. If wckeys is set both limits and associations are implied along with TrackWckey being set. By enforcing Associations no new job is allowed to run unless a corresponding association exists in the system. If limits are enforced users can be limited by association to how many nodes or how long jobs can run or other limits. With wckeys enforced jobs will not be scheduled unless a valid workload characterization key is specified. This value may not be reset via "scontrol reconfig". It only takes effect upon restart of the slurmctld daemon.
- AccountingStorageHost
- The name of the machine hosting the accounting storage database. Only used for database type storage plugins, ignored otherwise. Also see DefaultStorageHost.
- AccountingStorageLoc
- The fully qualified file name where accounting records are written when the AccountingStorageType is "accounting_storage/filetxt" or else the name of the database where accounting records are stored when the AccountingStorageType is a database. Also see DefaultStorageLoc.
- AccountingStoragePass
- The password used to gain access to the database to store the accounting data. Only used for database type storage plugins, ignored otherwise. In the case of SLURM DBD (Database Daemon) with Munge authentication this can be configured to use a Munge daemon specifically configured to provide authentication between clusters while the default Munge daemon provides authentication within a cluster. In that case, AccountingStoragePass should specify the named port to be used for communications with the alternate Munge daemon (e.g. "/var/run/munge/global.socket.2"). The default value is NULL. Also see DefaultStoragePass.
- AccountingStoragePort
- The listening port of the accounting storage database server. Only used for database type storage plugins, ignored otherwise. Also see DefaultStoragePort.
- AccountingStorageType
- The accounting storage mechanism type. Acceptable values at present include "accounting_storage/filetxt", "accounting_storage/mysql", "accounting_storage/none", "accounting_storage/pgsql", and "accounting_storage/slurmdbd". The "accounting_storage/filetxt" value indicates that accounting records will be written to the file specified by the AccountingStorageLoc parameter. The "accounting_storage/mysql" value indicates that accounting records will be written to a MySQL database specified by the AccountingStorageLoc parameter. The "accounting_storage/pgsql" value indicates that accounting records will be written to a PostgreSQL database specified by the AccountingStorageLoc parameter. The "accounting_storage/slurmdbd" value indicates that accounting records will be written to the SLURM DBD, which manages an underlying MySQL or PostgreSQL database. See "man slurmdbd" for more information. The default value is "accounting_storage/none" and indicates that account records are not maintained. Note: the PostgreSQL plugin is not complete and should not be used if wanting to use associations. It will however work with basic accounting of jobs and job steps. If interested in completing, please email slurm-dev@lists.llnl.gov. Also see DefaultStorageType.
- AccountingStorageUser
- The user account for accessing the accounting storage database. Only used for database type storage plugins, ignored otherwise. Also see DefaultStorageUser.
- AuthType
- The authentication method for communications between SLURM components. Acceptable values at present include "auth/none", "auth/authd", and "auth/munge". The default value is "auth/munge". "auth/none" includes the UID in each communication, but it is not verified. This may be fine for testing purposes, but do not use "auth/none" if you desire any security. "auth/authd" indicates that Brett Chun's authd is to be used (see "http://www.theether.org/authd/" for more information. Note that authd is no longer actively supported). "auth/munge" indicates that LLNL's MUNGE is to be used (this is the best supported authentication mechanism for SLURM, see "http://home.gna.org/munge/" for more information). All SLURM daemons and commands must be terminated prior to changing the value of AuthType and later restarted (SLURM jobs can be preserved).
- BackupAddr
- The name that BackupController should be referred to in establishing a communications path. This name will be used as an argument to the gethostbyname() function for identification. For example, "elx0000" might be used to designate the Ethernet address for node "lx0000". By default the BackupAddr will be identical in value to BackupController.
- BackupController
- The name of the machine where SLURM control functions are to be executed in the event that ControlMachine fails. This node may also be used as a compute server if so desired. It will come into service as a controller only upon the failure of ControlMachine and will revert to a "standby" mode when the ControlMachine becomes available once again. This should be a node name without the full domain name. I.e., the hostname returned by the gethostname() function cut at the first dot (e.g. use "tux001" rather than "tux001.my.com"). While not essential, it is recommended that you specify a backup controller. See the RELOCATING CONTROLLERS section if you change this.
- BatchStartTimeout
- The maximum time (in seconds) that a batch job is permitted for launching before being considered missing and releasing the allocation. The default value is 10 (seconds). Larger values may be required if more time is required to execute the Prolog, load user environment variables (for Moab spawned jobs), or if the slurmd daemon gets paged from memory.
- CacheGroups
- If set to 1, the slurmd daemon will cache /etc/groups entries. This can improve performance for highly parallel jobs if NIS servers are used and unable to respond very quickly. The default value is 0 to disable caching group data.
- CheckpointType
- The system-initiated checkpoint method to be used for user jobs. The slurmctld daemon must be restarted for a change in CheckpointType to take effect. Supported values presently include:
-
- checkpoint/aix
- for AIX systems only
- checkpoint/blcr
- Berkeley Lab Checkpoint Restart (BLCR)
- checkpoint/none
- no checkpoint support (default)
- checkpoint/ompi
- OpenMPI (version 1.3 or higher)
- checkpoint/xlch
- XLCH (requires that SlurmUser be root)
-
- ClusterName
- The name by which this SLURM managed cluster is known in the accounting database. This is needed distinguish accounting records when multiple clusters report to the same database.
- CompleteWait
- The time, in seconds, given for a job to remain in COMPLETING state before any additional jobs are scheduled. If set to zero, pending jobs will be started as soon as possible. Since a COMPLETING job's resources are released for use by other jobs as soon as the Epilog completes on each individual node, this can result in very fragmented resource allocations. To provide jobs with the minimum response time, a value of zero is recommended (no waiting). To minimize fragmentation of resources, a value equal to KillWait plus two is recommended. In that case, setting KillWait to a small value may be beneficial. The default value of CompleteWait is zero seconds. The value may not exceed 65533.
- ControlAddr
- Name that ControlMachine should be referred to in establishing a communications path. This name will be used as an argument to the gethostbyname() function for identification. For example, "elx0000" might be used to designate the Ethernet address for node "lx0000". By default the ControlAddr will be identical in value to ControlMachine.
- ControlMachine
- The short hostname of the machine where SLURM control functions are executed (i.e. the name returned by the command "hostname -s", use "tux001" rather than "tux001.my.com"). This value must be specified. In order to support some high availability architectures, multiple hostnames may be listed with comma separators and one ControlAddr must be specified. The high availability system must insure that the slurmctld daemon is running on only one of these hosts at a time. See the RELOCATING CONTROLLERS section if you change this.
- CryptoType
- The cryptographic signature tool to be used in the creation of job step credentials. The slurmctld daemon must be restarted for a change in CryptoType to take effect. Acceptable values at present include "crypto/munge" and "crypto/openssl". The default value is "crypto/munge".
- DebugFlags
- Defines specific subsystems which should provide more detailed event logging. Multiple subsystems can be specified with comma separators. Valid subsystems available today (with more to come) include:
-
- CPU_Bind
- CPU binding details for jobs and steps
- Steps
- Slurmctld resource allocation for job steps
- Triggers
- Slurmctld triggers
- Wiki
- Sched/wiki and wiki2 communications
-
- DefMemPerCPU
- Default real memory size available per allocated CPU in MegaBytes. Used to avoid over-subscribing memory and causing paging. DefMemPerCPU would generally be used if individual processors are allocated to jobs (SelectType=select/cons_res). The default value is 0 (unlimited). Also see DefMemPerNode and MaxMemPerCPU. DefMemPerCPU and DefMemPerNode are mutually exclusive. NOTE: Enforcement of memory limits currently requires enabling of accounting, which samples memory use on a periodic basis (data need not be stored, just collected).
- DefMemPerNode
- Default real memory size available per allocated node in MegaBytes. Used to avoid over-subscribing memory and causing paging. DefMemPerNode would generally be used if whole nodes are allocated to jobs (SelectType=select/linear) and resources are shared (Shared=yes or Shared=force). The default value is 0 (unlimited). Also see DefMemPerCPU and MaxMemPerNode. DefMemPerCPU and DefMemPerNode are mutually exclusive. NOTE: Enforcement of memory limits currently requires enabling of accounting, which samples memory use on a periodic basis (data need not be stored, just collected).
- DefaultStorageHost
- The default name of the machine hosting the accounting storage and job completion databases. Only used for database type storage plugins and when the AccountingStorageHost and JobCompHost have not been defined.
- DefaultStorageLoc
- The fully qualified file name where accounting records and/or job completion records are written when the DefaultStorageType is "filetxt" or the name of the database where accounting records and/or job completion records are stored when the DefaultStorageType is a database. Also see AccountingStorageLoc and JobCompLoc.
- DefaultStoragePass
- The password used to gain access to the database to store the accounting and job completion data. Only used for database type storage plugins, ignored otherwise. Also see AccountingStoragePass and JobCompPass.
- DefaultStoragePort
- The listening port of the accounting storage and/or job completion database server. Only used for database type storage plugins, ignored otherwise. Also see AccountingStoragePort and JobCompPort.
- DefaultStorageType
- The accounting and job completion storage mechanism type. Acceptable values at present include "filetxt", "mysql", "none", "pgsql", and "slurmdbd". The value "filetxt" indicates that records will be written to a file. The value "mysql" indicates that accounting records will be written to a mysql database. The default value is "none", which means that records are not maintained. The value "pgsql" indicates that records will be written to a PostgreSQL database. The value "slurmdbd" indicates that records will be written to the SLURM DBD, which maintains its own database. See "man slurmdbd" for more information. Also see AccountingStorageType and JobCompType.
- DefaultStorageUser
- The user account for accessing the accounting storage and/or job completion database. Only used for database type storage plugins, ignored otherwise. Also see AccountingStorageUser and JobCompUser.
- DisableRootJobs
- If set to "YES" then user root will be prevented from running any jobs. The default value is "NO", meaning user root will be able to execute jobs. DisableRootJobs may also be set by partition.
- EnforcePartLimits
- If set to "YES" then jobs which exceed a partition's size and/or time limits will be rejected at submission time. If set to "NO" then the job will be accepted and remain queued until the partition limits are altered. The default value is "NO".
- Epilog
- Fully qualified pathname of a script to execute as user root on every node when a user's job completes (e.g. "/usr/local/slurm/epilog"). This may be used to purge files, disable user login, etc. By default there is no epilog. See Prolog and Epilog Scripts for more information.
- EpilogMsgTime
- The number of microseconds the the slurmctld daemon requires to process an epilog completion message from the slurmd dameons. This parameter can be used to prevent a burst of epilog completion messages from being sent at the same time which should help prevent lost messages and improve throughput for large jobs. The default value is 2000 microseconds. For a 1000 node job, this spreads the epilog completion messages out over two seconds.
- EpilogSlurmctld
- Fully qualified pathname of a program for the slurmctld to execute upon termination of a job allocation (e.g. "/usr/local/slurm/epilog_controller"). The program executes as SlurmUser, which gives it permission to drain nodes and requeue the job if a failure occurs or cancel the job if appropriate. The program can be used to reboot nodes or perform other work to prepare resources for use. See Prolog and Epilog Scripts for more information.
- FastSchedule
- Controls how a node's configuration specifications in slurm.conf are used. If the number of node configuration entries in the configuration file is significantly lower than the number of nodes, setting FastSchedule to 1 will permit much faster scheduling decisions to be made. (The scheduler can just check the values in a few configuration records instead of possibly thousands of node records.) Note that on systems with hyper-threading, the processor count reported by the node will be twice the actual processor count. Consider which value you want to be used for scheduling purposes.
-
- 1 (default)
- Consider the configuration of each node to be that specified in the slurm.conf configuration file and any node with less than the configured resources will be set DOWN.
- 0
- Base scheduling decisions upon the actual configuration of each individual node except that the node's processor count in SLURM's configuration must match the actual hardware configuration if SchedulerType=sched/gang or SelectType=select/cons_res are configured (both of those plugins maintain resource allocation information using bitmaps for the cores in the system and must remain static, while the node's memory and disk space can be established later).
- 2
- Consider the configuration of each node to be that specified in the slurm.conf configuration file and any node with less than the configured resources will not be set DOWN. This can be useful for testing purposes.
-
- FirstJobId
- The job id to be used for the first submitted to SLURM without a specific requested value. Job id values generated will incremented by 1 for each subsequent job. This may be used to provide a meta-scheduler with a job id space which is disjoint from the interactive jobs. The default value is 1.
- GetEnvTimeout
- Used for Moab scheduled jobs only. Controls how long job should wait in seconds for loading the user's environment before attempting to load it from a cache file. Applies when the srun or sbatch --get-user-env option is used. If set to 0 then always load the user's environment from the cache file. The default value is 2 seconds.
- HealthCheckInterval
- The interval in seconds between executions of HealthCheckProgram. The default value is zero, which disables execution.
- HealthCheckProgram
- Fully qualified pathname of a script to execute as user root periodically on all compute nodes that are not in the DOWN state. This may be used to verify the node is fully operational and DRAIN the node or send email if a problem is detected. Any action to be taken must be explicitly performed by the program (e.g. execute "scontrol update NodeName=foo State=drain Reason=tmp_file_system_full" to drain a node). The interval is controlled using the HealthCheckInterval parameter. Note that the HealthCheckProgram will be executed at the same time on all nodes to minimize its impact upon parallel programs. This program is will be killed if it does not terminate normally within 60 seconds. By default, no program will be executed.
- InactiveLimit
- The interval, in seconds, a job or job step is permitted to be inactive before it is terminated. A job or job step is considered inactive if the associated srun command is not responding to slurm daemons. This could be due to the termination of the srun command or the program being is a stopped state. A batch job is considered inactive if it has no active job steps (e.g. periods of pre- and post-processing). This limit permits defunct jobs to be purged in a timely fashion without waiting for their time limit to be reached. This value should reflect the possibility that the srun command may stopped by a debugger or considerable time could be required for batch job pre- and post-processing. This limit is ignored for jobs running in partitions with the RootOnly flag set (the scheduler running as root will be responsible for the job). The default value is unlimited (zero). May not exceed 65533.
- JobAcctGatherType
- The job accounting mechanism type. Acceptable values at present include "jobacct_gather/aix" (for AIX operating system), "jobacct_gather/linux" (for Linux operating system) and "jobacct_gather/none" (no accounting data collected). The default value is "jobacct_gather/none". In order to use the sacct tool, "jobacct_gather/aix" or "jobacct_gather/linux" must be configured.
- JobAcctGatherFrequency
- The job accounting sampling interval. For jobacct_gather/none this parameter is ignored. For jobacct_gather/aix and jobacct_gather/linux the parameter is a number is seconds between sampling job state. The default value is 30 seconds. A value of zero disables real the periodic job sampling and provides accounting information only on job termination (reducing SLURM interference with the job). Smaller (non-zero) values have a greater impact upon job performance, but a value of 30 seconds is not likely to be noticeable for applications having less than 10,000 tasks. Users can override this value on a per job basis using the --acctg-freq option when submitting the job.
- JobCheckpointDir
- Specifies the default directory for storing or reading job checkpoint information. The data stored here is only a few thousand bytes per job and includes information needed to resubmit the job request, not job's memory image. The directory must be readable and writable by SlurmUser, but not writable by regular users. The job memory images may be in a different location as specified by --checkpoint-dir option at job submit time or scontrol's ImageDir option.
- JobCompHost
- The name of the machine hosting the job completion database. Only used for database type storage plugins, ignored otherwise. Also see DefaultStorageHost.
- JobCompLoc
- The fully qualified file name where job completion records are written when the JobCompType is "jobcomp/filetxt" or the database where job completion records are stored when the JobCompType is a database. Also see DefaultStorageLoc.
- JobCompPass
- The password used to gain access to the database to store the job completion data. Only used for database type storage plugins, ignored otherwise. Also see DefaultStoragePass.
- JobCompPort
- The listening port of the job completion database server. Only used for database type storage plugins, ignored otherwise. Also see DefaultStoragePort.
- JobCompType
- The job completion logging mechanism type. Acceptable values at present include "jobcomp/none", "jobcomp/filetxt", "jobcomp/mysql", "jobcomp/pgsql", and "jobcomp/script"". The default value is "jobcomp/none", which means that upon job completion the record of the job is purged from the system. If using the accounting infrastructure this plugin may not be of interest since the information here is redundant. The value "jobcomp/filetxt" indicates that a record of the job should be written to a text file specified by the JobCompLoc parameter. The value "jobcomp/mysql" indicates that a record of the job should be written to a mysql database specified by the JobCompLoc parameter. The value "jobcomp/pgsql" indicates that a record of the job should be written to a PostgreSQL database specified by the JobCompLoc parameter. The value "jobcomp/script" indicates that a script specified by the JobCompLoc parameter is to be executed with environment variables indicating the job information.
- JobCompUser
- The user account for accessing the job completion database. Only used for database type storage plugins, ignored otherwise. Also see DefaultStorageUser.
- JobCredentialPrivateKey
- Fully qualified pathname of a file containing a private key used for authentication by SLURM daemons. This parameter is ignored if CryptoType=crypto/munge.
- JobCredentialPublicCertificate
- Fully qualified pathname of a file containing a public key used for authentication by SLURM daemons. This parameter is ignored if CryptoType=crypto/munge.
- JobFileAppend
- This option controls what to do if a job's output or error file exist when the job is started. If JobFileAppend is set to a value of 1, then append to the existing file. By default, any existing file is truncated.
- JobRequeue
- This option controls what to do by default after a node failure. If JobRequeue is set to a value of 1, then any job running on the failed node will be requeued for execution on different nodes. If JobRequeue is set to a value of 0, then any job running on the failed node will be terminated. Use the sbatch --no-requeue or --requeue option to change the default behavior for individual jobs. The default value is 1.
- KillOnBadExit
- If set to 1, the job will be terminated immediately when one of the processes is crashed or aborted. With default value of 0, if one of the processes is crashed or aborted the other processes will continue to run.
- KillWait
- The interval, in seconds, given to a job's processes between the SIGTERM and SIGKILL signals upon reaching its time limit. If the job fails to terminate gracefully in the interval specified, it will be forcibly terminated. The default value is 30 seconds. The value may not exceed 65533.
- Licenses
- Specification of licenses (or other resources available on all nodes of the cluster) which can be allocated to jobs. License names can optionally be followed by an asterisk and count with a default count of one. Multiple license names should be comma separated (e.g. "Licenses=foo*4,bar"). Note that SLURM prevents jobs from being scheduled if their required license specification is not available. SLURM does not prevent jobs from using licenses that are not explicitly listed in the job submission specification.
- MailProg
- Fully qualified pathname to the program used to send email per user request. The default value is "/bin/mail".
- MaxJobCount
- The maximum number of jobs SLURM can have in its active database at one time. Set the values of MaxJobCount and MinJobAge to insure the slurmctld daemon does not exhaust its memory or other resources. Once this limit is reached, requests to submit additional jobs will fail. The default value is 5000 jobs. This value may not be reset via "scontrol reconfig". It only takes effect upon restart of the slurmctld daemon. May not exceed 65533.
- MaxMemPerCPU
- Maximum real memory size available per allocated CPU in MegaBytes. Used to avoid over-subscribing memory and causing paging. MaxMemPerCPU would generally be used if individual processors are allocated to jobs (SelectType=select/cons_res). The default value is 0 (unlimited). Also see DefMemPerCPU and MaxMemPerNode. MaxMemPerCPU and MaxMemPerNode are mutually exclusive. NOTE: Enforcement of memory limits currently requires enabling of accounting, which samples memory use on a periodic basis (data need not be stored, just collected).
- MaxMemPerNode
- Maximum real memory size available per allocated node in MegaBytes. Used to avoid over-subscribing memory and causing paging. MaxMemPerNode would generally be used if whole nodes are allocated to jobs (SelectType=select/linear) and resources are shared (Shared=yes or Shared=force). The default value is 0 (unlimited). Also see DefMemPerNode and MaxMemPerCPU. MaxMemPerCPU and MaxMemPerNode are mutually exclusive. NOTE: Enforcement of memory limits currently requires enabling of accounting, which samples memory use on a periodic basis (data need not be stored, just collected).
- MaxTasksPerNode
- Maximum number of tasks SLURM will allow a job step to spawn on a single node. The default MaxTasksPerNode is 128.
- MessageTimeout
- Time permitted for a round-trip communication to complete in seconds. Default value is 10 seconds. For systems with shared nodes, the slurmd daemon could be paged out and necessitate higher values.
- MinJobAge
- The minimum age of a completed job before its record is purged from SLURM's active database. Set the values of MaxJobCount and MinJobAge to insure the slurmctld daemon does not exhaust its memory or other resources. The default value is 300 seconds. A value of zero prevents any job record purging. May not exceed 65533.
- MpiDefault
- Identifies the default type of MPI to be used. Srun may override this configuration parameter in any case. Currently supported versions include: mpichgm, mvapich, none (default, which works for many other versions of MPI including LAM MPI and Open MPI).
- MpiParams
- MPI parameters. Used to identify ports used by OpenMPI only and the input format is "ports=12000-12999" to identify a range of communication ports to be used.
- OverTimeLimit
- Number of minutes by which a job can exceed its time limit before being canceled. The configured job time limit is treated as a soft limit. Adding OverTimeLimit to the soft limit provides a hard limit, at which point the job is canceled. This is particularly useful for backfill scheduling, which bases upon each job's soft time limit. The default value is zero. Man not exceed exceed 65533 minutes. A value of "UNLIMITED" is also supported.
- PluginDir
- Identifies the places in which to look for SLURM plugins. This is a colon-separated list of directories, like the PATH environment variable. The default value is "/usr/local/lib/slurm".
- PlugStackConfig
- Location of the config file for SLURM stackable plugins that use the Stackable Plugin Architecture for Node job (K)control (SPANK). This provides support for a highly configurable set of plugins to be called before and/or after execution of each task spawned as part of a user's job step. Default location is "plugstack.conf" in the same directory as the system slurm.conf. For more information on SPANK plugins, see the spank(8) manual.
- PreemptMode
- Enables gang scheduling and/or controls the mechanism used to preempt jobs. When the PreemptType parameter is set to enable preemption, the PreemptMode selects the mechanism used to preempt the lower priority jobs. The GANG option is used to enable gang scheduling independent of whether preemption is enabled (the PreemptType setting). The GANG option can be specified in addition to a PreemptMode setting with the two options comma separated. The SUSPEND option requires that gang scheduling be enabled (i.e, "PreemptMode=SUSPEND,GANG").
-
- OFF
- is the default value and disables job preemption and gang scheduling. This is the only option compatible with SchedulerType=sched/wiki or SchedulerType=sched/wiki2 (used by Maui and Moab respectively, which provide their own job preemption functionality).
- CANCEL
- always cancel the job.
- CHECKPOINT
- preempts jobs by checkpointing them (if possible) or canceling them.
- GANG
- enables gang scheduling (time slicing) of jobs in the same partition.
- REQUEUE
- preempts jobs by requeuing them (if possible) or canceling them.
- SUSPEND
- preempts jobs by suspending them. A suspended job will resume execution once the high priority job preempting it completes. The SUSPEND may only be used with the GANG option (the gang scheduler module performs the job resume operation).
-
- PreemptType
- This specifies the plugin used to identify which jobs can be preempted in order to start a pending job.
-
- preempt/none
- Job preemption is disabled. This is the default.
- preempt/partition_prio
- Job preemption is based upon partition priority. Jobs in higher priority partitions (queues) may preempt jobs from lower priority partitions.
- preempt/qos
- Job preemption rules are specified by Quality Of Service (QOS) specifications in the SLURM database a database. This is not compatible with PreemptMode=OFF or PreemptMode=SUSPEND (i.e. preempted jobs must be removed from the resources).
-
- PriorityDecayHalfLife
- This controls how long prior resource use is considered in determining how over- or under-serviced an association is (user, bank account and cluster) in determining job priority. If set to 0 no decay will be applied. This is helpful if you want to enforce hard time limits per association. If set to 0 PriorityUsageResetPeriod must be set to some interval. Applicable only if PriorityType=priority/multifactor. The unit is a time string (i.e. min, hr:min:00, days-hr:min:00, or days-hr). The default value is 7-0 (7 days).
- PriorityCalcPeriod
- The period of time in minutes in which the half-life decay will be re-calculated. Applicable only if PriorityType=priority/multifactor. The default value is 5 (minutes).
- PriorityFavorSmall
-
Specifies that small jobs should be given preferencial scheduling priority. Applicable only if PriorityType=priority/multifactor. Supported values are "YES" and "NO". The default value is "NO".
- PriorityMaxAge
- Specifies the job age which will be given the maximum age factor in computing priority. For example, a value of 30 minutes would result in all jobs over 30 minutes old would get the same age-based priority. Applicable only if PriorityType=priority/multifactor. The unit is a time string (i.e. min, hr:min:00, days-hr:min:00, or days-hr). The default value is 7-0 (7 days).
- PriorityUsageResetPeriod
- At this interval the usage of associations will be reset to 0. This is used if you want to enforce hard limits of time usage per association. If PriorityDecayHalfLife is set to be 0 no decay will happen and this is the only way to reset the usage accumulated by running jobs. By default this is turned off and it is advised to use the PriorityDecayHalfLife option to avoid not having anything running on your cluster, but if your schema is set up to only allow certain amounts of time on your system this is the way to do it. Applicable only if PriorityType=priority/multifactor.
-
- NONE
- Never clear historic usage. The default value.
- NOW
- Clear the historic usage now. Executed at startup and reconfiguration time.
- DAILY
- Cleared every day at midnight.
- WEEKLY
- Cleared every week on Sunday at time 00:00.
- MONTHLY
- Cleared on the first day of each month at time 00:00.
- QUARTERLY
- Cleared on the first day of each quarter at time 00:00.
- YEARLY
- Cleared on the first day of each year at time 00:00.
-
- PriorityType
- This specifies the plugin to be used in establishing a job's scheduling priority. Supported values are "priority/basic" (jobs are prioritized by order of arrival, also suitable for sched/wiki and sched/wiki2) and "priority/multifactor" (jobs are prioritized based upon size, age, fair-share of allocation, etc). The default value is "priority/basic".
- PriorityWeightAge
- An integer value that sets the degree to which the queue wait time component contributes to the job's priority. Applicable only if PriorityType=priority/multifactor. The default value is 0.
- PriorityWeightFairshare
- An integer value that sets the degree to which the fair-share component contributes to the job's priority. Applicable only if PriorityType=priority/multifactor. The default value is 0.
- PriorityWeightJobSize
- An integer value that sets the degree to which the job size component contributes to the job's priority. Applicable only if PriorityType=priority/multifactor. The default value is 0.
- PriorityWeightPartition
- An integer value that sets the degree to which the node partition component contributes to the job's priority. Applicable only if PriorityType=priority/multifactor. The default value is 0.
- PriorityWeightQOS
- An integer value that sets the degree to which the Quality Of Service component contributes to the job's priority. Applicable only if PriorityType=priority/multifactor. The default value is 0.
- PrivateData
- This controls what type of information is hidden from regular users. By default, all information is visible to all users. User SlurmUser and root can always view all information. Multiple values may be specified with a comma separator. Acceptable values include:
-
- accounts
- (NON-SLURMDBD ACCOUNTING ONLY) prevents users from viewing any account definitions unless they are coordinators of them.
- jobs
- prevents users from viewing jobs or job steps belonging to other users. (NON-SLURMDBD ACCOUNTING ONLY) prevents users from viewing job records belonging to other users unless they are coordinators of the association running the job when using sacct.
- nodes
- prevents users from viewing node state information.
- partitions
- prevents users from viewing partition state information.
- reservations
- prevents regular users from viewing reservations.
- usage
- (NON-SLURMDBD ACCOUNTING ONLY) prevents users from viewing usage of any other user. This applies to sreport.
- users
- (NON-SLURMDBD ACCOUNTING ONLY) prevents users from viewing information of any user other than themselves, this also makes it so users can only see associations they deal with. Coordinators can see associations of all users they are coordinator of, but can only see themselves when listing users.
-
- ProctrackType
- Identifies the plugin to be used for process tracking. The slurmd daemon uses this mechanism to identify all processes which are children of processes it spawns for a user job. The slurmd daemon must be restarted for a change in ProctrackType to take effect. NOTE: "proctrack/linuxproc" and "proctrack/pgid" can fail to identify all processes associated with a job since processes can become a child of the init process (when the parent process terminates) or change their process group. To reliably track all processes, one of the other mechanisms utilizing kernel modifications is preferable. NOTE: "proctrack/linuxproc" is not compatible with "switch/elan." Acceptable values at present include:
-
- proctrack/aix which uses an AIX kernel extension and is
- the default for AIX systems
- proctrack/linuxproc which uses linux process tree using
- parent process IDs
- proctrack/rms which uses Quadrics kernel patch and is the
- default if "SwitchType=switch/elan"
- proctrack/sgi_job which uses SGI's Process Aggregates (PAGG)
- kernel module, see http://oss.sgi.com/projects/pagg/ for more information
- proctrack/pgid which uses process group IDs and is the
- default for all other systems
-
- Prolog
- Fully qualified pathname of a program for the slurmd to execute whenever it is asked to run a job step from a new job allocation (e.g. "/usr/local/slurm/prolog"). The slurmd executes the script before starting the first job step. This may be used to purge files, enable user login, etc. By default there is no prolog. Any configured script is expected to complete execution quickly (in less time than MessageTimeout). See Prolog and Epilog Scripts for more information.
- PrologSlurmctld
- Fully qualified pathname of a program for the slurmctld to execute before granting a new job allocation (e.g. "/usr/local/slurm/prolog_controller"). The program executes as SlurmUser, which gives it permission to drain nodes and requeue the job if a failure occurs or cancel the job if appropriate. The program can be used to reboot nodes or perform other work to prepare resources for use. While this program is running, the nodes associated with the job will be have a POWER_UP/CONFIGURING flag set in their state, which can be readily viewed. A non-zero exit code will result in the job being requeued (where possible) or killed. See Prolog and Epilog Scripts for more information.
- PropagatePrioProcess
- Setting PropagatePrioProcess to "1", will cause a users job to run with the same priority (aka nice value) as the users process which launched the job on the submit node. If set to "0", or left unset, the users job will inherit the scheduling priority from the slurm daemon.
- PropagateResourceLimits
- A list of comma separated resource limit names. The slurmd daemon uses these names to obtain the associated (soft) limit values from the users process environment on the submit node. These limits are then propagated and applied to the jobs that will run on the compute nodes. This parameter can be useful when system limits vary among nodes. Any resource limits that do not appear in the list are not propagated. However, the user can override this by specifying which resource limits to propagate with the srun commands "--propagate" option. If neither of the 'propagate resource limit' parameters are specified, then the default action is to propagate all limits. Only one of the parameters, either PropagateResourceLimits or PropagateResourceLimitsExcept, may be specified. The following limit names are supported by SLURM (although some options may not be supported on some systems):
-
- ALL
- All limits listed below
- NONE
- No limits listed below
- AS
- The maximum address space for a processes
- CORE
- The maximum size of core file
- CPU
- The maximum amount of CPU time
- DATA
- The maximum size of a process's data segment
- FSIZE
- The maximum size of files created
- MEMLOCK
- The maximum size that may be locked into memory
- NOFILE
- The maximum number of open files
- NPROC
- The maximum number of processes available
- RSS
- The maximum resident set size
- STACK
- The maximum stack size
-
- PropagateResourceLimitsExcept
- A list of comma separated resource limit names. By default, all resource limits will be propagated, (as described by the PropagateResourceLimits parameter), except for the limits appearing in this list. The user can override this by specifying which resource limits to propagate with the srun commands "--propagate" option. See PropagateResourceLimits above for a list of valid limit names.
- ResumeProgram
- SLURM supports a mechanism to reduce power consumption on nodes that remain idle for an extended period of time. This is typically accomplished by reducing voltage and frequency or powering the node down. ResumeProgram is the program that will be executed when a node in power save mode is assigned work to perform. For reasons of reliability, ResumeProgram may execute more than once for a node when the slurmctld daemon crashes and is restarted. If ResumeProgram is unable to restore a node to service, it should requeue any node associated with the node and set the node state to DRAIN. The program executes as SlurmUser. The argument to the program will be the names of nodes to be removed from power savings mode (using SLURM's hostlist expression format). By default no program is run. Related configuration options include ResumeTimeout, ResumeRate, SuspendRate, SuspendTime, SuspendTimeout, SuspendProgram, SuspendExcNodes, and SuspendExcParts. More information is available at the SLURM web site (https://computing.llnl.gov/linux/slurm/power_save.html).
- ResumeRate
- The rate at which nodes in power save mode are returned to normal operation by ResumeProgram. The value is number of nodes per minute and it can be used to prevent power surges if a large number of nodes in power save mode are assigned work at the same time (e.g. a large job starts). A value of zero results in no limits being imposed. The default value is 300 nodes per minute. Related configuration options include ResumeTimeout, ResumeProgram, SuspendRate, SuspendTime, SuspendTimeout, SuspendProgram, SuspendExcNodes, and SuspendExcParts.
- ResumeTimeout
- Maximum time permitted (in second) between when a node is resume request is issued and when the node is actually available for use. Nodes which fail to respond in this time frame may be marked DOWN and the jobs scheduled on the node requeued. The default value is 60 seconds. Related configuration options include ResumeProgram, ResumeRate, SuspendRate, SuspendTime, SuspendTimeout, SuspendProgram, SuspendExcNodes and SuspendExcParts. More information is available at the SLURM web site (https://computing.llnl.gov/linux/slurm/power_save.html).
- ResvOverRun
- Describes how long a job already running in a reservation should be permitted to execute after the end time of the reservation has been reached. The time period is specified in minutes and the default value is 0 (kill the job immediately). The value may not exceed 65533 minutes, although a value of "UNLIMITED" is supported to permit a job to run indefinitely after its reservation is terminated.
- ReturnToService
- Controls when a DOWN node will be returned to service. The default value is 0. Supported values include
-
- 0
- A node will remain in the DOWN state until a system administrator explicitly changes its state (even if the slurmd daemon registers and resumes communications).
- 1
- A DOWN node will become available for use upon registration with a valid configuration only if it was set DOWN due to being non-responsive. If the node was set DOWN for any other reason (low memory, prolog failure, epilog failure, silently rebooting, etc.), its state will not automatically be changed.
- 2
- A DOWN node will become available for use upon registration with a valid configuration. The node could have been set DOWN for any reason.
-
- SallocDefaultCommand
- Normally, salloc(1) will run the user's default shell when a command to execute is not specified on the salloc command line. If SallocDefaultCommand is specified, salloc will instead run the configured command. The command is passed to '/bin/sh -c', so shell metacharacters are allowed, and commands with multiple arguments should be quoted. For instance:
SallocDefaultCommand = "$SHELL"
would run the shell in the user's $SHELL environment variable. and
SallocDefaultCommand = "xterm -T Job_$SLURM_JOB_ID"
would run xterm with the title set to the SLURM jobid.
- SchedulerParameters
- The interpretation of this parameter varies by SchedulerType. Multiple options may be comma separated. The following options apply only to SchedulerType=sched/backfill.
-
- interval=#
- The number of seconds between iterations. Higher values result in less overhead and responsiveness. The default value is 5 seconds on BlueGene systems and 10 seconds otherwise.
- max_job_bf=#
- The maximum number of jobs to attempt backfill scheduling for (i.e. the queue depth). Higher values result in more overhead and less responsiveness. Until an attempt is made to backfill schedule a job, its expected initiation time value will not be set. The default value is 50. In the case of large clusters (more than 1000 nodes) configured with SelectType=select/cons_res, setting a smaller value may be desirable.
-
- SchedulerPort
- The port number on which slurmctld should listen for connection requests. This value is only used by the Maui Scheduler (see SchedulerType). The default value is 7321.
- SchedulerRootFilter
- Identifies whether or not RootOnly partitions should be filtered from any external scheduling activities. If set to 0, then RootOnly partitions are treated like any other partition. If set to 1, then RootOnly partitions are exempt from any external scheduling activities. The default value is 1. Currently only used by the built-in backfill scheduling module "sched/backfill" (see SchedulerType).
- SchedulerTimeSlice
- Number of seconds in each time slice when SchedulerType=sched/gang. The default value is 30 seconds.
- SchedulerType
- Identifies the type of scheduler to be used. Note the slurmctld daemon must be restarted for a change in scheduler type to become effective (reconfiguring a running daemon has no effect for this parameter). The scontrol command can be used to manually change job priorities if desired. Acceptable values include:
-
- sched/builtin
- for the built-in FIFO (First In First Out) scheduler. This is the default.
- sched/backfill
- for a backfill scheduling module to augment the default FIFO scheduling. Backfill scheduling will initiate lower-priority jobs if doing so does not delay the expected initiation time of any higher priority job. Effectiveness of backfill scheduling is dependent upon users specifying job time limits, otherwise all jobs will have the same time limit and backfilling is impossible. Note documentation for the SchedulerParameters option above.
- sched/gang
- Defunct option. See PreemptType and PreemptMode options.
- sched/hold
- to hold all newly arriving jobs if a file "/etc/slurm.hold" exists otherwise use the built-in FIFO scheduler
- sched/wiki
- for the Wiki interface to the Maui Scheduler
- sched/wiki2
- for the Wiki interface to the Moab Cluster Suite
-
- SelectType
- Identifies the type of resource selection algorithm to be used. Acceptable values include
-
- select/linear
- for allocation of entire nodes assuming a one-dimensional array of nodes in which sequentially ordered nodes are preferable. This is the default value for non-BlueGene systems.
- select/cons_res
- The resources within a node are individually allocated as consumable resources. Note that whole nodes can be allocated to jobs for selected partitions by using the Shared=Exclusive option. See the partition Shared parameter for more information.
- select/bluegene
- for a three-dimensional BlueGene system. The default value is "select/bluegene" for BlueGene systems.
-
- SelectTypeParameters
- The permitted values of SelectTypeParameters depend upon the configured value of SelectType. SelectType=select/bluegene supports no SelectTypeParameters. The only supported option for SelectType=select/linear is CR_Memory, which treats memory as a consumable resource and prevents memory over subscription with job preemption or gang scheduling. The following values are supported for SelectType=select/cons_res:
-
- CR_CPU
- CPUs are consumable resources. There is no notion of sockets, cores or threads; do not define those values in the node specification. If these are defined, unexpected results will happen when hyper-threading is enabled Procs= should be used instead. On a multi-core system, each core will be considered a CPU. On a multi-core and hyper-threaded system, each thread will be considered a CPU. On single-core systems, each CPUs will be considered a CPU.
- CR_CPU_Memory
- CPUs and memory are consumable resources. There is no notion of sockets, cores or threads; do not define those values in the node specification. If these are defined, unexpected results will happen when hyper-threading is enabled Procs= should be used instead. Setting a value for DefMemPerCPU is strongly recommended.
- CR_Core
- Cores are consumable resources. On nodes with hyper-threads, each thread is counted as a CPU to satisfy a job's resource requirement, but multiple jobs are not allocated threads on the same core.
- CR_Core_Memory
- Cores and memory are consumable resources. On nodes with hyper-threads, each thread is counted as a CPU to satisfy a job's resource requirement, but multiple jobs are not allocated threads on the same core. Setting a value for DefMemPerCPU is strongly recommended.
- CR_Socket
- Sockets are consumable resources. On nodes with multiple cores, each core or thread is counted as a CPU to satisfy a job's resource requirement, but multiple jobs are not allocated resources on the same socket. Note that jobs requesting one CPU will only be given access to that one CPU, but no other job will share the socket.
- CR_Socket_Memory
- Memory and sockets are consumable resources. On nodes with multiple cores, each core or thread is counted as a CPU to satisfy a job's resource requirement, but multiple jobs are not allocated resources on the same socket. Note that jobs requesting one CPU will only be given access to that one CPU, but no other job will share the socket. Setting a value for DefMemPerCPU is strongly recommended.
- CR_Memory
- Memory is a consumable resource. NOTE: This implies Shared=YES or Shared=FORCE for all partitions. Setting a value for DefMemPerCPU is strongly recommended.
-
- SlurmUser
- The name of the user that the slurmctld daemon executes as. For security purposes, a user other than "root" is recommended. This user must exist on all nodes of the cluster for authentication of communications between SLURM components. The default value is "root".
- SlurmdUser
- The name of the user that the slurmd daemon executes as. This user must exist on all nodes of the cluster for authentication of communications between SLURM components. The default value is "root".
- SlurmctldDebug
- The level of detail to provide slurmctld daemon's logs. Values from 0 to 9 are legal, with `0' being "quiet" operation and `9' being insanely verbose. The default value is 3.
- SlurmctldLogFile
- Fully qualified pathname of a file into which the slurmctld daemon's logs are written. The default value is none (performs logging via syslog).
- SlurmctldPidFile
- Fully qualified pathname of a file into which the slurmctld daemon may write its process id. This may be used for automated signal processing. The default value is "/var/run/slurmctld.pid".
- SlurmctldPort
- The port number that the SLURM controller, slurmctld, listens to for work. The default value is SLURMCTLD_PORT as established at system build time. If none is explicitly specified, it will be set to 6817. NOTE: Either slurmctld and slurmd daemons must not execute on the same nodes or the values of SlurmctldPort and SlurmdPort must be different.
- SlurmctldTimeout
- The interval, in seconds, that the backup controller waits for the primary controller to respond before assuming control. The default value is 120 seconds. May not exceed 65533.
- SlurmdDebug
- The level of detail to provide slurmd daemon's logs. Values from 0 to 9 are legal, with `0' being "quiet" operation and `9' being insanely verbose. The default value is 3.
- SlurmdLogFile
- Fully qualified pathname of a file into which the slurmd daemon's logs are written. The default value is none (performs logging via syslog). Any "%h" within the name is replaced with the hostname on which the slurmd is running.
- SlurmdPidFile
- Fully qualified pathname of a file into which the slurmd daemon may write its process id. This may be used for automated signal processing. The default value is "/var/run/slurmd.pid".
- SlurmdPort
- The port number that the SLURM compute node daemon, slurmd, listens to for work. The default value is SLURMD_PORT as established at system build time. If none is explicitly specified, its value will be 6818. NOTE: Either slurmctld and slurmd daemons must not execute on the same nodes or the values of SlurmctldPort and SlurmdPort must be different.
- SlurmdSpoolDir
- Fully qualified pathname of a directory into which the slurmd daemon's state information and batch job script information are written. This must be a common pathname for all nodes, but should represent a directory which is local to each node (reference a local file system). The default value is "/var/spool/slurmd." NOTE: This directory is also used to store slurmd's shared memory lockfile, and should not be changed unless the system is being cleanly restarted. If the location of SlurmdSpoolDir is changed and slurmd is restarted, the new daemon will attach to a different shared memory region and lose track of any running jobs.
- SlurmdTimeout
- The interval, in seconds, that the SLURM controller waits for slurmd to respond before configuring that node's state to DOWN. A value of zero indicates the node will not be tested by slurmctld to confirm the state of slurmd, the node will not be automatically set to a DOWN state indicating a non-responsive slurmd, and some other tool will take responsibility for monitoring the state of each compute node and its slurmd daemon. SLURM's hierarchical communication mechanism is used to ping the slurmd daemons in order to minimize system noise and overhead. The default value is 300 seconds. The value may not exceed 65533 seconds.
- SrunEpilog
- Fully qualified pathname of an executable to be run by srun following the completion of a job step. The command line arguments for the executable will be the command and arguments of the job step. This configuration parameter may be overridden by srun's --epilog parameter. Note that while the other "Epilog" executables (e.g., TaskEpilog) are run by slurmd on the compute nodes where the tasks are executed, the SrunEpilog runs on the node where the "srun" is executing.
- SrunProlog
- Fully qualified pathname of an executable to be run by srun prior to the launch of a job step. The command line arguments for the executable will be the command and arguments of the job step. This configuration parameter may be overridden by srun's --prolog parameter. Note that while the other "Prolog" executables (e.g., TaskProlog) are run by slurmd on the compute nodes where the tasks are executed, the SrunProlog runs on the node where the "srun" is executing.
- StateSaveLocation
- Fully qualified pathname of a directory into which the SLURM controller, slurmctld, saves its state (e.g. "/usr/local/slurm/checkpoint"). SLURM state will saved here to recover from system failures. SlurmUser must be able to create files in this directory. If you have a BackupController configured, this location should be readable and writable by both systems. Since all running and pending job information is stored here, the use of a reliable file system (e.g. RAID) is recommended. The default value is "/tmp". If any slurm daemons terminate abnormally, their core files will also be written into this directory.
- SuspendExcNodes
- Specifies the nodes which are to not be placed in power save mode, even if the node remains idle for an extended period of time. Use SLURM's hostlist expression to identify nodes. By default no nodes are excluded. Related configuration options include ResumeTimeout, ResumeProgram, ResumeRate, SuspendProgram, SuspendRate, SuspendTime, SuspendTimeout, and SuspendExcParts.
- SuspendExcParts
- Specifies the partitions whose nodes are to not be placed in power save mode, even if the node remains idle for an extended period of time. Multiple partitions can be identified and separated by commas. By default no nodes are excluded. Related configuration options include ResumeTimeout, ResumeProgram, ResumeRate, SuspendProgram, SuspendRate, SuspendTime SuspendTimeout, and SuspendExcNodes.
- SuspendProgram
- SuspendProgram is the program that will be executed when a node remains idle for an extended period of time. This program is expected to place the node into some power save mode. This can be used to reduce the frequency and voltage of a node or completely power the node off. The program executes as SlurmUser. The argument to the program will be the names of nodes to be placed into power savings mode (using SLURM's hostlist expression format). By default, no program is run. Related configuration options include ResumeTimeout, ResumeProgram, ResumeRate, SuspendRate, SuspendTime, SuspendTimeout, SuspendExcNodes, and SuspendExcParts.
- SuspendRate
- The rate at which nodes are place into power save mode by SuspendProgram. The value is number of nodes per minute and it can be used to prevent a large drop in power power consumption (e.g. after a large job completes). A value of zero results in no limits being imposed. The default value is 60 nodes per minute. Related configuration options include ResumeTimeout, ResumeProgram, ResumeRate, SuspendProgram, SuspendTime, SuspendTimeout, SuspendExcNodes, and SuspendExcParts.
- SuspendTime
- Nodes which remain idle for this number of seconds will be placed into power save mode by SuspendProgram. A value of -1 disables power save mode and is the default. Related configuration options include ResumeTimeout, ResumeProgram, ResumeRate, SuspendProgram, SuspendRate, SuspendTimeout, SuspendExcNodes, and SuspendExcParts.
- SuspendTimeout
- Maximum time permitted (in second) between when a node suspend request is issued and when the node shutdown. At that time the node must ready for a resume request to be issued as needed for new work. The default value is 30 seconds. Related configuration options include ResumeProgram, ResumeRate, ResumeTimeout, SuspendRate, SuspendTime, SuspendProgram, SuspendExcNodes and SuspendExcParts. More information is available at the SLURM web site (https://computing.llnl.gov/linux/slurm/power_save.html).
- SwitchType
- Identifies the type of switch or interconnect used for application communications. Acceptable values include "switch/none" for switches not requiring special processing for job launch or termination (Myrinet, Ethernet, and InfiniBand), "switch/elan" for Quadrics Elan 3 or Elan 4 interconnect. The default value is "switch/none". All SLURM daemons, commands and running jobs must be restarted for a change in SwitchType to take effect. If running jobs exist at the time slurmctld is restarted with a new value of SwitchType, records of all jobs in any state may be lost.
- TaskEpilog
- Fully qualified pathname of a program to be execute as the slurm job's owner after termination of each task. See TaskProlog for execution order details.
- TaskPlugin
- Identifies the type of task launch plugin, typically used to provide resource management within a node (e.g. pinning tasks to specific processors). Acceptable values include "task/none" for systems requiring no special handling and "task/affinity" to enable the --cpu_bind and/or --mem_bind srun options. The default value is "task/none". If you "task/affinity" and encounter problems, it may be due to the variety of system calls used to implement task affinity on different operating systems. If that is the case, you may want to use Portable Linux Process Affinity (PLPA, see http://www.open-mpi.org/software/plpa), which is supported by SLURM.
- TaskPluginParam
- Optional parameters for the task plugin. Multiple options should be comma separated If None, Sockets, Cores, Threads, and/or Verbose are specified, they will override the --cpu_bind option specified by the user in the srun command. None, Sockets, Cores and Threads are mutually exclusive and since they decrease scheduling flexibility are not generally recommended (select no more than one of them). Cpusets and Sched are mutually exclusive (select only one of them).
-
- Cores
- Always bind to cores. Overrides user options or automatic binding.
- Cpusets
- Use cpusets to perform task affinity functions. By default, Sched task binding is performed.
- None
- Perform no task binding. Overrides user options or automatic binding.
- Sched
- Use sched_setaffinity or plpa_sched_setaffinity (if available) to bind tasks to processors.
- Sockets
- Always bind to sockets. Overrides user options or automatic binding.
- Threads
- Always bind to threads. Overrides user options or automatic binding.
- Verbose
- Verbosely report binding before tasks run. Overrides user options.
-
- TaskProlog
- Fully qualified pathname of a program to be execute as the slurm job's owner prior to initiation of each task. Besides the normal environment variables, this has SLURM_TASK_PID available to identify the process ID of the task being started. Standard output from this program can be used to control the environment variables and output for the user program.
-
- export NAME=value
- Will set environment variables for the task being spawned. Everything after the equal sign to the end of the line will be used as the value for the environment variable. Exporting of functions is not currently supported.
- print ...
- Will cause that line (without the leading "print ") to be printed to the job's standard output.
- unset NAME
- Will clear environment variables for the task being spawned.
- The order of task prolog/epilog execution is as follows:
- 1. pre_launch()
- Function in TaskPlugin
- 2. TaskProlog
- System-wide per task program defined in slurm.conf
- 3. user prolog
- Job step specific task program defined using srun's --task-prolog option or SLURM_TASK_PROLOG environment variable
- 4. Execute the job step's task
- 5. user epilog
- Job step specific task program defined using srun's --task-epilog option or SLURM_TASK_EPILOG environment variable
- 6. TaskEpilog
- System-wide per task program defined in slurm.conf
- 7. post_term()
- Function in TaskPlugin
-
- TmpFS
- Fully qualified pathname of the file system available to user jobs for temporary storage. This parameter is used in establishing a node's TmpDisk space. The default value is "/tmp".
- TopologyPlugin
- Identifies the plugin to be used for determining the network topology and optimizing job allocations to minimize network contention. Acceptable values include "topology/3d_torus" (default for Cray XT, IBM BlueGene and Sun Constellation systems, best-fit logic over three-dimensional topology) "topology/none" (default for other systems, best-fit logic over one-dimensional topology) and "topology/tree" (determine the network topology based upon information contained in a topology.conf file). See NETWORK TOPOLOGY below for details. Additional plugins may be provided in the future which gather topology information directly from the network.
- TrackWCKey
- Boolean yes or no. Used to set display and track of the Workload Characterization Key. Must be set to track wckey usage.
- TreeWidth
- Slurmd daemons use a virtual tree network for communications. TreeWidth specifies the width of the tree (i.e. the fanout). The default value is 50, meaning each slurmd daemon can communicate with up to 50 other slurmd daemons and over 2500 nodes can be contacted with two message hops. The default value will work well for most clusters. Optimal system performance can typically be achieved if TreeWidth is set to the square root of the number of nodes in the cluster for systems having no more than 2500 nodes or the cube root for larger systems.
- UnkillableStepProgram
- If the processes in a job step are determined to be unkillable for a period of time specified by the UnkillableStepTimeout variable, the program specified by UnkillableStepProgram will be executed. This program can be used to take special actions to clean up the unkillable processes and/or notify computer administrators. The program will be run SlurmdUser (usually "root"). By default no program is run.
- UnkillableStepTimeout
- The length of time, in seconds, that SLURM will wait before deciding that processes in a job step are unkillable (after they have been signaled with SIGKILL) and execute UnkillableStepProgram as described above. The default timeout value is 60 seconds.
- UsePAM
- If set to 1, PAM (Pluggable Authentication Modules for Linux) will be enabled. PAM is used to establish the upper bounds for resource limits. With PAM support enabled, local system administrators can dynamically configure system resource limits. Changing the upper bound of a resource limit will not alter the limits of running jobs, only jobs started after a change has been made will pick up the new limits. The default value is 0 (not to enable PAM support). Remember that PAM also needs to be configured to support SLURM as a service. For sites using PAM's directory based configuration option, a configuration file named slurm should be created. The module-type, control-flags, and module-path names that should be included in the file are:
auth required pam_localuser.so
auth required pam_shells.so
account required pam_unix.so
account required pam_access.so
session required pam_unix.so
For sites configuring PAM with a general configuration file, the appropriate lines (see above), where slurm is the service-name, should be added. - WaitTime
- Specifies how many seconds the srun command should by default wait after the first task terminates before terminating all remaining tasks. The "--wait" option on the srun command line overrides this value. If set to 0, this feature is disabled. May not exceed 65533 seconds.
The configuration of nodes (or machines) to be managed by SLURM is also specified in /etc/slurm.conf. Changes in node configuration (e.g. adding nodes, changing their processor count, etc.) require restarting the slurmctld daemon. Only the NodeName must be supplied in the configuration file. All other node configuration information is optional. It is advisable to establish baseline node configurations, especially if the cluster is heterogeneous. Nodes which register to the system with less than the configured resources (e.g. too little memory), will be placed in the "DOWN" state to avoid scheduling jobs on them. Establishing baseline configurations will also speed SLURM's scheduling process by permitting it to compare job requirements against these (relatively few) configuration parameters and possibly avoid having to check job requirements against every individual node's configuration. The resources checked at node registration time are: Procs, RealMemory and TmpDisk. While baseline values for each of these can be established in the configuration file, the actual values upon node registration are recorded and these actual values may be used for scheduling purposes (depending upon the value of FastSchedule in the configuration file.
Default values can be specified with a record in which "NodeName" is "DEFAULT". The default entry values will apply only to lines following it in the configuration file and the default values can be reset multiple times in the configuration file with multiple entries where "NodeName=DEFAULT". The "NodeName=" specification must be placed on every line describing the configuration of nodes. In fact, it is generally possible and desirable to define the configurations of all nodes in only a few lines. This convention permits significant optimization in the scheduling of larger clusters. In order to support the concept of jobs requiring consecutive nodes on some architectures, node specifications should be place in this file in consecutive order. No single node name may be listed more than once in the configuration file. Use "DownNodes=" to record the state of nodes which are temporarily in a DOWN, DRAIN or FAILING state without altering permanent configuration information. A job step's tasks are allocated to nodes in order the nodes appear in the configuration file. There is presently no capability within SLURM to arbitrarily order a job step's tasks.
Multiple node names may be comma separated (e.g. "alpha,beta,gamma") and/or a simple node range expression may optionally be used to specify numeric ranges of nodes to avoid building a configuration file with large numbers of entries. The node range expression can contain one pair of square brackets with a sequence of comma separated numbers and/or ranges of numbers separated by a "-" (e.g. "linux[0-64,128]", or "lx[15,18,32-33]"). Note that the numeric ranges can include one or more leading zeros to indicate the numeric portion has a fixed number of digits (e.g. "linux[0000-1023]"). Up to two numeric ranges can be included in the expression (e.g. "rack[0-63]_blade[0-41]"). If one or more numeric expressions are included, one of them must be at the end of the name (e.g. "unit[0-31]rack" is invalid), but arbitrary names can always be used in a comma separated list.
On BlueGene systems only, the square brackets should contain pairs of three digit numbers separated by a "x". These numbers indicate the boundaries of a rectangular prism (e.g. "bgl[000x144,400x544]"). See BlueGene documentation for more details. The node configuration specified the following information:
- NodeName
- Name that SLURM uses to refer to a node (or base partition for BlueGene systems). Typically this would be the string that "/bin/hostname -s" returns. It may also be the fully qualified domain name as returned by "/bin/hostname -f" (e.g. "foo1.bar.com"), or any valid domain name associated with the host through the host database (/etc/hosts) or DNS, depending on the resolver settings. Note that if the short form of the hostname is not used, it may prevent use of hostlist expressions (the numeric portion in brackets must be at the end of the string). Only short hostname forms are compatible with the switch/elan and switch/federation plugins at this time. It may also be an arbitrary string if NodeHostname is specified. If the NodeName is "DEFAULT", the values specified with that record will apply to subsequent node specifications unless explicitly set to other values in that node record or replaced with a different set of default values. For architectures in which the node order is significant, nodes will be considered consecutive in the order defined. For example, if the configuration for "NodeName=charlie" immediately follows the configuration for "NodeName=baker" they will be considered adjacent in the computer.
- NodeHostname
- Typically this would be the string that "/bin/hostname -s" returns. It may also be the fully qualified domain name as returned by "/bin/hostname -f" (e.g. "foo1.bar.com"), or any valid domain name associated with the host through the host database (/etc/hosts) or DNS, depending on the resolver settings. Note that if the short form of the hostname is not used, it may prevent use of hostlist expressions (the numeric portion in brackets must be at the end of the string). Only short hostname forms are compatible with the switch/elan and switch/federation plugins at this time. A node range expression can be used to specify a set of nodes. If an expression is used, the number of nodes identified by NodeHostname on a line in the configuration file must be identical to the number of nodes identified by NodeName. By default, the NodeHostname will be identical in value to NodeName.
- NodeAddr
- Name that a node should be referred to in establishing a communications path. This name will be used as an argument to the gethostbyname() function for identification. If a node range expression is used to designate multiple nodes, they must exactly match the entries in the NodeName (e.g. "NodeName=lx[0-7] NodeAddr="elx[0-7]"). NodeAddr may also contain IP addresses. By default, the NodeAddr will be identical in value to NodeName.
- CoresPerSocket
- Number of cores in a single physical processor socket (e.g. "2"). The CoresPerSocket value describes physical cores, not the logical number of processors per socket. NOTE: If you have multi-core processors, you will likely need to specify this parameter in order to optimize scheduling. The default value is 1.
- Feature
- A comma delimited list of arbitrary strings indicative of some characteristic associated with the node. There is no value associated with a feature at this time, a node either has a feature or it does not. If desired a feature may contain a numeric component indicating, for example, processor speed. By default a node has no features.
- Procs
- Number of logical processors on the node (e.g. "2"). If Procs is omitted, it will set equal to the product of Sockets, CoresPerSocket, and ThreadsPerCore. The default value is 1.
- RealMemory
- Size of real memory on the node in MegaBytes (e.g. "2048"). The default value is 1.
- Reason
- Identifies the reason for a node being in state "DOWN", "DRAINED" "DRAINING", "FAIL" or "FAILING". Use quotes to enclose a reason having more than one word.
- Sockets
- Number of physical processor sockets/chips on the node (e.g. "2"). If Sockets is omitted, it will be inferred from Procs, CoresPerSocket, and ThreadsPerCore. NOTE: If you have multi-core processors, you will likely need to specify these parameters. The default value is 1.
- State
- State of the node with respect to the initiation of user jobs. Acceptable values are "DOWN", "DRAIN", "FAIL", "FAILING" and "UNKNOWN". "DOWN" indicates the node failed and is unavailable to be allocated work. "DRAIN" indicates the node is unavailable to be allocated work. "FAIL" indicates the node is expected to fail soon, has no jobs allocated to it, and will not be allocated to any new jobs. "FAILING" indicates the node is expected to fail soon, has one or more jobs allocated to it, but will not be allocated to any new jobs. "UNKNOWN" indicates the node's state is undefined (BUSY or IDLE), but will be established when the slurmd daemon on that node registers. The default value is "UNKNOWN". Also see the DownNodes parameter below.
- ThreadsPerCore
- Number of logical threads in a single physical core (e.g. "2"). Note that the SLURM can allocate resources to jobs down to the resolution of a core. If your system is configured with more than one thread per core, execution of a different job on each thread is not supported. A job can execute a one task per thread from within one job step or execute a distinct job step on each of the threads. Note also if you are running with more than 1 thread per core and running the select/cons_res plugin you will want to set the SelectTypeParameters variable to something other than CR_CPU to avoid unexpected results. The default value is 1.
- TmpDisk
- Total size of temporary disk storage in TmpFS in MegaBytes (e.g. "16384"). TmpFS (for "Temporary File System") identifies the location which jobs should use for temporary storage. Note this does not indicate the amount of free space available to the user on the node, only the total file system size. The system administration should insure this file system is purged as needed so that user jobs have access to most of this space. The Prolog and/or Epilog programs (specified in the configuration file) might be used to insure the file system is kept clean. The default value is 0.
- Weight
- The priority of the node for scheduling purposes. All things being equal, jobs will be allocated the nodes with the lowest weight which satisfies their requirements. For example, a heterogeneous collection of nodes might be placed into a single partition for greater system utilization, responsiveness and capability. It would be preferable to allocate smaller memory nodes rather than larger memory nodes if either will satisfy a job's requirements. The units of weight are arbitrary, but larger weights should be assigned to nodes with more processors, memory, disk space, higher processor speed, etc. Note that if a job allocation request can not be satisfied using the nodes with the lowest weight, the set of nodes with the next lowest weight is added to the set of nodes under consideration for use (repeat as needed for higher weight values). If you absolutely want to minimize the number of higher weight nodes allocated to a job (at a cost of higher scheduling overhead), give each node a distinct Weight value and they will be added to the pool of nodes being considered for scheduling individually. The default value is 1.
The "DownNodes=" configuration permits you to mark certain nodes as in a DOWN, DRAIN, FAIL, or FAILING state without altering the permanent configuration information listed under a "NodeName=" specification.
- DownNodes
- Any node name, or list of node names, from the "NodeName=" specifications.
- Reason
- Identifies the reason for a node being in state "DOWN", "DRAIN", "FAIL" or "FAILING. Use quotes to enclose a reason having more than one word.
- State
- State of the node with respect to the initiation of user jobs. Acceptable values are "BUSY", "DOWN", "DRAIN", "FAIL", "FAILING, "IDLE", and "UNKNOWN". "DOWN" indicates the node failed and is unavailable to be allocated work. "DRAIN" indicates the node is unavailable to be allocated work. "FAIL" indicates the node is expected to fail soon, has no jobs allocated to it, and will not be allocated to any new jobs. "FAILING" indicates the node is expected to fail soon, has one or more jobs allocated to it, but will not be allocated to any new jobs. "FUTURE" indicates the node is defined for future use and need not exist when the SLURM daemons are started. These nodes can be made available for use simply by updating the node state using the scontrol command rather than restarting the slurmctld daemon. After these nodes are made available, change their State in the slurm.conf file. Until these nodes are made available, they will not be seen using any SLURM commands or Is nor will any attempt be made to contact them. "UNKNOWN" indicates the node's state is undefined (BUSY or IDLE), but will be established when the slurmd daemon on that node registers. The default value is "UNKNOWN".
The partition configuration permits you to establish different job limits or access controls for various groups (or partitions) of nodes. Nodes may be in more than one partition, making partitions serve as general purpose queues. For example one may put the same set of nodes into two different partitions, each with different constraints (time limit, job sizes, groups allowed to use the partition, etc.). Jobs are allocated resources within a single partition. Default values can be specified with a record in which "PartitionName" is "DEFAULT". The default entry values will apply only to lines following it in the configuration file and the default values can be reset multiple times in the configuration file with multiple entries where "PartitionName=DEFAULT". The "PartitionName=" specification must be placed on every line describing the configuration of partitions. NOTE: Put all parameters for each partition on a single line. Each line of partition configuration information should represent a different partition. The partition configuration file contains the following information:
- AllocNodes
- Comma separated list of nodes from which users can execute jobs in the partition. Node names may be specified using the node range expression syntax described above. The default value is "ALL".
- AllowGroups
- Comma separated list of group IDs which may execute jobs in the partition. If at least one group associated with the user attempting to execute the job is in AllowGroups, he will be permitted to use this partition. Jobs executed as user root can use any partition without regard to the value of AllowGroups. If user root attempts to execute a job as another user (e.g. using srun's --uid option), this other user must be in one of groups identified by AllowGroups for the job to successfully execute. The default value is "ALL". NOTE: For performance reasons, SLURM maintains a list of user IDs allowed to use each partition and this is checked at job submission time. This list of user IDs is updated when the slurmctld daemon is restarted, reconfigured (e.g. "scontrol reconfig") or the partition's AllowGroups value is reset, even if is value is unchanged (e.g. "scontrol update PartitionName=name AllowGroups=group"). For a user's access to a partition to change, both his group membership must change and SLURM's internal user ID list must change using one of the methods described above.
- Default
- If this keyword is set, jobs submitted without a partition specification will utilize this partition. Possible values are "YES" and "NO". The default value is "NO".
- DefaultTime
- Run time limit used for jobs that don't specify a value. If not set then MaxTime will be used. Format is the same as for MaxTime.
- DisableRootJobs
- If set to "YES" then user root will be prevented from running any jobs on this partition. The default value will be the value of DisableRootJobs set outside of a partition specification (which is "NO", allowing user root to execute jobs).
- Hidden
- Specifies if the partition and its jobs are to be hidden by default. Hidden partitions will by default not be reported by the SLURM APIs or commands. Possible values are "YES" and "NO". The default value is "NO".
- MaxNodes
- Maximum count of nodes (c-nodes for BlueGene systems) which may be allocated to any single job. The default value is "UNLIMITED", which is represented internally as -1. This limit does not apply to jobs executed by SlurmUser or user root.
- MaxTime
- Maximum run time limit for jobs. Format is minutes, minutes:seconds, hours:minutes:seconds, days-hours, days-hours:minutes, days-hours:minutes:seconds or "UNLIMITED". Time resolution is one minute and second values are rounded up to the next minute. This limit does not apply to jobs executed by SlurmUser or user root.
- MinNodes
- Minimum count of nodes (or base partitions for BlueGene systems) which may be allocated to any single job. The default value is 1. This limit does not apply to jobs executed by SlurmUser or user root.
- Nodes
- Comma separated list of nodes (or base partitions for BlueGene systems) which are associated with this partition. Node names may be specified using the node range expression syntax described above. A blank list of nodes (i.e. "Nodes= ") can be used if one wants a partition to exist, but have no resources (possibly on a temporary basis).
- PartitionName
- Name by which the partition may be referenced (e.g. "Interactive"). This name can be specified by users when submitting jobs. If the PartitionName is "DEFAULT", the values specified with that record will apply to subsequent partition specifications unless explicitly set to other values in that partition record or replaced with a different set of default values.
- Priority
- Jobs submitted to a higher priority partition will be dispatched before pending jobs in lower priority partitions and if possible they will preempt running jobs from lower priority partitions. Note that a partition's priority takes precedence over a job's priority. The value may not exceed 65533.
- RootOnly
- Specifies if only user ID zero (i.e. user root) may allocate resources in this partition. User root may allocate resources for any other user, but the request must be initiated by user root. This option can be useful for a partition to be managed by some external entity (e.g. a higher-level job manager) and prevents users from directly using those resources. Possible values are "YES" and "NO". The default value is "NO".
- Shared
- Controls the ability of the partition to execute more than one job at a time on each resource (node, socket or core depending upon the value of SelectTypeParameters). If resources are to be shared, avoiding memory over-subscription is very important. SelectTypeParameters should be configured to treat memory as a consumable resource and the --mem option should be used for job allocations. Sharing of resources is typically useful only when using gang scheduling (PreemptMode=suspend or PreemptMode=kill). Possible values for Shared are "EXCLUSIVE", "FORCE", "YES", and "NO". The default value is "NO". For more information see the following web pages:
https://computing.llnl.gov/linux/slurm/cons_res.html,
https://computing.llnl.gov/linux/slurm/cons_res_share.html,
https://computing.llnl.gov/linux/slurm/gang_scheduling.html, and
https://computing.llnl.gov/linux/slurm/preempt.html.-
- EXCLUSIVE
- Allocates entire nodes to jobs even with select/cons_res configured. Jobs that run in partitions with "Shared=EXCLUSIVE" will have exclusive access to all allocated nodes.
- FORCE
- Makes all resources in the partition available for sharing without any means for users to disable it. May be followed with a colon and maximum number of jobs in running or suspended state. For example "Shared=FORCE:4" enables each node, socket or core to execute up to four jobs at once. Recommended only for BlueGene systems configured with small blocks or for systems running with gang scheduling (SchedulerType=sched/gang).
- YES
- Makes all resources in the partition available for sharing, but honors a user's request for dedicated resources. If SelectType=select/cons_res, then resources will be over-subscribed unless explicitly disabled in the job submit request using the "--exclusive" option. With SelectType=select/bluegene or SelectType=select/linear, resources will only be over-subscribed when explicitly requested by the user using the "--share" option on job submission. May be followed with a colon and maximum number of jobs in running or suspended state. For example "Shared=YES:4" enables each node, socket or core to execute up to four jobs at once. Recommended only for systems running with gang scheduling (SchedulerType=sched/gang).
- NO
- Selected resources are allocated to a single job. No resource will be allocated to more than one job.
-
- State
- State of partition or availability for use. Possible values are "UP" or "DOWN". The default value is "UP".
Prolog and Epilog Scripts
There are a variety of prolog and epilog program options that execute with various permissions and at various times. The four options most likely to be used are: Prolog and Epilog (executed once on each compute node for each job) plus PrologSlurmctld and EpilogSlurmctld (executed once on the ControlMachine for each job).NOTE: Standard output and error messages are normally not preserved. Explicitly write output and error messages to an appropriate location if you which to preserve that information.
NOTE: The Prolog script is ONLY run on any individual node when it first sees a job step from a new allocation; it does not run the Prolog immediately when an allocation is granted. If no job steps from an allocation are run on a node, it will never run the Prolog for that allocation. The Epilog, on the other hand, always runs on every node of an allocation when the allocation is released.
Information about the job is passed to the script using environment variables. Unless otherwise specified, these environment variables are available to all of the programs.
- BASIL_RESERVATION_ID
- Basil reservation ID. Available on Cray XT systems only.
- MPIRUN_PARTITION
- BlueGene partition name. Available on BlueGene systems only.
- SLURM_JOB_ACCOUNT
- Account name used for the job. Available in PrologSlurmctld and EpilogSlurmctld only.
- SLURM_JOB_CONSTRAINTS
- Features required to run the job. Available in PrologSlurmctld and EpilogSlurmctld only.
- SLURM_JOB_GID
- Group ID of the job's owner. Available in PrologSlurmctld and EpilogSlurmctld only.
- SLURM_JOB_GROUP
- Group name of the job's owner. Available in PrologSlurmctld and EpilogSlurmctld only.
- SLURM_JOB_ID
- Job ID.
- SLURM_JOB_NAME
- Name of the job. Available in PrologSlurmctld and EpilogSlurmctld only.
- SLURM_JOB_NODELIST
- Nodes assigned to job. A SLURM hostlist expression. "scontrol show hostnames" can be used to convert this to a list of individual host names. Available in PrologSlurmctld and EpilogSlurmctld only.
- SLURM_JOB_PARTITION
- Partition that job runs in. Available in PrologSlurmctld and EpilogSlurmctld only.
- SLURM_JOB_UID
- User ID of the job's owner.
- SLURM_JOB_USER
- User name of the job's owner.
NETWORK TOPOLOGY
SLURM is able to optimize job allocations to minimize network contention. Special SLURM logic is used to optimize allocations on systems with a three-dimensional interconnect (BlueGene, Sun Constellation, etc.) and information about configuring those systems are available on web pages available here: <https://computing.llnl.gov/linux/slurm/>. For a hierarchical network, SLURM needs to have detailed information about how nodes are configured on the network switches.Given network topology information, SLURM allocates all of a job's resources onto a single leaf of the network (if possible) using a best-fit algorithm. Otherwise it will allocate a job's resources onto multiple leaf switches so as to minimize the use of higher-level switches. The TopologyPlugin parameter controls which plugin is used to collect network topology information. The only values presently supported are "topology/3d_torus" (default for IBM BlueGene, Sun Constellation and Cray XT systems, performs best-fit logic over three-dimensional topology), "topology/none" (default for other systems, best-fit logic over one-dimensional topology), "topology/tree" (determine the network topology based upon information contained in a topology.conf file, see "man topology.conf" for more information). Future plugins may gather topology information directly from the network. The topology information is optional. If not provided, SLURM will perform a best-fit algorithm assuming the nodes are in a one-dimensional array as configured and the communications cost is related to the node distance in this array.
RELOCATING CONTROLLERS
If the cluster's computers used for the primary or backup controller will be out of service for an extended period of time, it may be desirable to relocate them. In order to do so, follow this procedure:1. Stop the SLURM daemons
2. Modify the slurm.conf file appropriately
3. Distribute the updated slurm.conf file to all nodes
4. Restart the SLURM daemons
There should be no loss of any running or pending jobs. Insure that any nodes added to the cluster have the current slurm.conf file installed.
CAUTION: If two nodes are simultaneously configured as the primary controller (two nodes on which ControlMachine specify the local host and the slurmctld daemon is executing on each), system behavior will be destructive. If a compute node has an incorrect ControlMachine or BackupController parameter, that node may be rendered unusable, but no other harm will result.
EXAMPLE
#
# Sample /etc/slurm.conf for dev[0-25].llnl.gov
# Author: John Doe
# Date: 11/06/2001
#
ControlMachine=dev0
ControlAddr=edev0
BackupController=dev1
BackupAddr=edev1
#
AuthType=auth/munge
Epilog=/usr/local/slurm/epilog
Prolog=/usr/local/slurm/prolog
FastSchedule=1
FirstJobId=65536
InactiveLimit=120
JobCompType=jobcomp/filetxt
JobCompLoc=/var/log/slurm/jobcomp
KillWait=30
MaxJobCount=10000
MinJobAge=3600
PluginDir=/usr/local/lib:/usr/local/slurm/lib
ReturnToService=0
SchedulerType=sched/backfill
SlurmctldLogFile=/var/log/slurm/slurmctld.log
SlurmdLogFile=/var/log/slurm/slurmd.log
SlurmctldPort=7002
SlurmdPort=7003
SlurmdSpoolDir=/usr/local/slurm/slurmd.spool
StateSaveLocation=/usr/local/slurm/slurm.state
SwitchType=switch/elan
TmpFS=/tmp
WaitTime=30
JobCredentialPrivateKey=/usr/local/slurm/private.key
JobCredentialPublicCertificate=/usr/local/slurm/public.cert
#
# Node Configurations
#
NodeName=DEFAULT Procs=2 RealMemory=2000 TmpDisk=64000
NodeName=DEFAULT State=UNKNOWN
NodeName=dev[0-25] NodeAddr=edev[0-25] Weight=16
# Update records for specific DOWN nodes
DownNodes=dev20 State=DOWN Reason="power,ETA=Dec25"
#
# Partition Configurations
#
PartitionName=DEFAULT MaxTime=30 MaxNodes=10 State=UP
PartitionName=debug Nodes=dev[0-8,18-25] Default=YES
PartitionName=batch Nodes=dev[9-17] MinNodes=4
PartitionName=long Nodes=dev[9-17] MaxTime=120 AllowGroups=admin
FILE AND DIRECTORY PERMISSIONS
There are three classes of files: Files used by slurmctld must be accessible by user SlurmUser and accessible by the primary and backup control machines. Files used by slurmd must be accessible by user root and accessible from every compute node. A few files need to be accessible by normal users on all login and compute nodes. While many files and directories are listed below, most of them will not be used with most configurations.- AccountingStorageLoc
- If this specifies a file, it must be writable by user SlurmUser. The file must be accessible by the primary and backup control machines. It is recommended that the file be readable by all users from login and compute nodes.
- Epilog
- Must be executable by user root. It is recommended that the file be readable by all users. The file must exist on every compute node.
- EpilogSlurmctld
- Must be executable by user SlurmUser. It is recommended that the file be readable by all users. The file must be accessible by the primary and backup control machines.
- HealthCheckProgram
- Must be executable by user root. It is recommended that the file be readable by all users. The file must exist on every compute node.
- JobCheckpointDir
- Must be writable by user SlurmUser and no other users. The file must be accessible by the primary and backup control machines.
- JobCompLoc
- If this specifies a file, it must be writable by user SlurmUser. The file must be accessible by the primary and backup control machines.
- JobCredentialPrivateKey
- Must be readable only by user SlurmUser and writable by no other users. The file must be accessible by the primary and backup control machines.
- JobCredentialPublicCertificate
- Readable to all users on all nodes. Must not be writable by regular users.
- MailProg
- Must be executable by user SlurmUser. Must not be writable by regular users. The file must be accessible by the primary and backup control machines.
- Prolog
- Must be executable by user root. It is recommended that the file be readable by all users. The file must exist on every compute node.
- PrologSlurmctld
- Must be executable by user SlurmUser. It is recommended that the file be readable by all users. The file must be accessible by the primary and backup control machines.
- ResumeProgram
- Must be executable by user SlurmUser. The file must be accessible by the primary and backup control machines.
- SallocDefaultCommand
- Must be executable by all users. The file must exist on every login and compute node.
- slurm.conf
- Readable to all users on all nodes. Must not be writable by regular users.
- SlurmctldLogFile
- Must be writable by user SlurmUser. The file must be accessible by the primary and backup control machines.
- SlurmctldPidFile
- Must be writable by user root. Preferably writable and removable by SlurmUser. The file must be accessible by the primary and backup control machines.
- SlurmdLogFile
- Must be writable by user root. A distinct file must exist on each compute node.
- SlurmdPidFile
- Must be writable by user root. A distinct file must exist on each compute node.
- SlurmdSpoolDir
- Must be writable by user root. A distinct file must exist on each compute node.
- SrunEpilog
- Must be executable by all users. The file must exist on every login and compute node.
- SrunProlog
- Must be executable by all users. The file must exist on every login and compute node.
- StateSaveLocation
- Must be writable by user SlurmUser. The file must be accessible by the primary and backup control machines.
- SuspendProgram
- Must be executable by user SlurmUser. The file must be accessible by the primary and backup control machines.
- TaskEpilog
- Must be executable by all users. The file must exist on every compute node.
- TaskProlog
- Must be executable by all users. The file must exist on every compute node.
- UnkillableStepProgram
- Must be executable by user SlurmUser. The file must be accessible by the primary and backup control machines.
COPYING
Copyright (C) 2002-2007 The Regents of the University of California. Copyright (C) 2008-2009 Lawrence Livermore National Security. Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER). CODE-OCEC-09-009. All rights reserved.This file is part of SLURM, a resource management program. For details, see <https://computing.llnl.gov/linux/slurm/>.
SLURM is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
SLURM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
FILES
/etc/slurm.confSEE ALSO
bluegene.conf(5), gethostbyname(3), getrlimit(2), group(5), hostname(1), scontrol(1), slurmctld(8), slurmd(8), slurmdbd(8), slurmdbd.conf(5), srun(1), spank(8), syslog(2), topology.conf(5), wiki.conf(5)
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre