Rechercher une page de manuel
srec_ti_txt
Langue: en
Version: SRecord (fedora - 06/07/09)
Section: 5 (Format de fichier)
NAME
srec_ti_txt - Texas Instruments ti-txt (MSP430) file formatDESCRIPTION
The ti-TXT format is used by the Texas Instruments MSP430 familty programming adapter.The TI-TXT hex format supports 16-bit hexadecimal data. It consists of one or more sections, followed by the end-of-file indicator.
Each section consistes of an at (@) sign followed a execution start address (in hexadecimal), and newline, and then data bytes (in hexadecimal). The section address is followed by a newline. There are to be 16 data bytes per line, except for the last line in a section.
The end-of-file indicator is the letter q followed by a newline. The end-of-file indicator mandatory.
Size Multiplier
In general, binary data will expand in sized by approximately 3.0 times when represented with this format.EXAMPLE
Here is an example ti-txt file taken from the reference below:-
@F000 31 40 00 03 B2 40 80 5A 20 01 D2 D3 22 00 D2 E3 21 00 3F 40 E8 FD 1F 83 FE 23 F9 3F @FFFE 00 F0 q
SEE ALSO
http://www.ti.com/lit/pdf/slau101, section A.2. Note: the portion which says addresses must be even, and the number of data bytes in a section must be even, is wrong.COPYRIGHT
srec_ti_txt version 1.47Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Peter Miller
The srec_ti_txt program comes with ABSOLUTELY NO WARRANTY; for details use the 'srec_ti_txt -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'srec_ti_txt -VERSion License' command.
AUTHOR
Peter Miller | E-Mail: | pmiller@opensource.org.au |
/\/\* | WWW: | http://miller.emu.id.au/pmiller/ |
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre