blktool

Langue: en

Version: August 2004 (fedora - 01/12/10)

Section: 8 (Commandes administrateur)

NAME

blktool - Display or change block device settings

SYNOPSIS

blktool [options] device [N acoustic-mgmt]

blktool [options] device [N block-sz]

blktool [options] device [bus-id ]

blktool [options] device [N bus-state]

blktool [options] device [class ]

blktool [options] device [N cd-speed]

blktool [options] device [defect-mgmt off|on]

blktool [options] device [dev-keep-settings off|on]

blktool [options] device [dev-read-ahead off|on]

blktool [options] device [dma off|on]

blktool [options] device [geometry ]

blktool [options] device [N i2o-rcache]

blktool [options] device [N i2o-wcache]

blktool [options] device [id ]

blktool [options] device [keep-settings off|on]

blktool [options] device [media unlock|lock]

blktool [options] device [N multiple-count]

blktool [options] device [no-write-err off|on]

blktool [options] device [pio-data 16-bit|32-bit]

blktool [options] device [N pio-mode]

blktool [options] device [N pm-mode]

blktool [options] device [N queue-depth]

blktool [options] device [N read-ahead]

blktool [options] device [readonly off|on]

blktool [options] device [reread-part ]

blktool [options] device [reset ]

blktool [options] device [sector-sz ]

blktool [options] device [sleep ]

blktool [options] device [standby ]

blktool [options] device [unmask-irq off|on]

blktool [options] device [version ]

blktool [options] [version ]

blktool [options] device [wcache off|on]

DESCRIPTION

blktool is used for querying and/or changing settings of a block device.

device is the name of the block device to query or modify.

OPTIONS

-f
For a few commands, blktool will flush the buffers of the block device out to disk, before performing the requested command. Specify this option, "force", disables any flushing blktool would attempt to do.
-t class
where class is one of 'ide', 'ata', 'scsi', 'i2o', or 'auto' to override the default auto-detection of device class.

COMMANDS

acoustic-mgmt
Query or set underlying device's acoustic level.
block-sz
Query or set device block size.
bus-id
Query device bus id.
bus-state
Query or set device bus state (0 off, 1 on, 2 tristate)
class
Query the detected (or overridden, via -t) device class. Typically this will result in 'ATA' or 'SCSI' for most devices. Detection is based on device major; thus your SATA device may appear as
cd-speed
Set CD-ROM device speed (in Kbytes/sec).
defect-mgmt
Toggle underlying device's defect management (obsolete).
dev-keep-settings
Toggle underlying device's revert-to-defaults-on-reset feature.
dev-read-ahead
Toggle underlying device's read-ahead feature.
dma
Toggle DMA data transfer. Omitting the on/off argument will print the current state.
geometry
Query device geometry (cylinders / heads / sectors / etc.).
i2o-rcache
Query or set an I2O block device's read cache.
i2o-wcache
Query or set an I2O block device's write cache.
id
Query IDENTIFY [PACKET] DEVICE data.
keep-settings
Keep settings across device resets. Omitting the on/off argument will print the current state.
media
Lock in (or unlock) a removeable device.
multiple-count
Set multiple count for use in READ/WRITE MULTIPLE commands.
no-write-err
Toggle ignore-write-errors flag. Omitting the on/off argument will print the current state.
pio-data
ATA PIO data transfer via 16-bit or 32-bit I/O. Omitting the on/off argument will print the current state.
pio-mode
Set underlying ATA device's PIO data transfer mode.
pm-mode
Set underlying device's Advanced Power Management mode.
queued-depth
Query or set underlying device's queue depth.
read-ahead
Query or set block device read-ahead (in units of sectors).
readonly
Toggle block device read-only setting. Omitting the on/off argument will print the current state.
reread-part
Re-read partition table.
reset
Execute device reset.
sector-sz
Query device sector size.
sleep
Put device to sleep immediately.
standby
Put device in standby mode.
unmask-irq
Toggle unmasked irqs. Omitting the on/off argument will print the current state.
version
Print version number and exit.
wcache
Toggle underlying device's writeback cache.

BUGS

Inevitably there are some. Please report any you find.

AUTHOR

blktool was written by Jeff Garzik.

AVAILABILITY

blktool is available over the Web on the SourceForge site at http://sourceforge.net/projects/gkernel/