Rechercher une page de manuel
VisualBoyAdvance
Langue: en
Version: March 2008 (debian - 07/07/09)
Section: 1 (Commandes utilisateur)
NAME
VisualBoyAdvance - VisualBoyAdvanceDESCRIPTION
VisualBoyAdvance [option ...] fileOPTIONS
- -1, --video-1x
- 1x
- -2, --video-2x
- 2x
- -3, --video-3x
- 3x
- -4, --video-4x
- 4x
- -F, --fullscreen
- Full screen
- -G, --gdb=PROTOCOL
- GNU Remote Stub mode: tcp - use TCP at port 55555 tcp:PORT - use TCP at port PORT pipe - use pipe transport
- -N, --no-debug
- Don't parse debug information
- -S, --flash-size=SIZE
- Set the Flash size
- --flash-64k
- 0 - 64K Flash
- --flash-128k
- 1 - 128K Flash
- -T, --throttle=THROTTLE
- Set the desired throttle (5...1000)
- -Y, --yuv=TYPE
- Use YUV overlay for drawing: 0 - YV12 1 - UYVY 2 - YVYU 3 - YUY2 4 - IYUV
- -b, --bios=BIOS
- Use given bios file
- -c, --config=FILE
- Read the given configuration file
- -d, --debug
- Enter debugger
- -f, --filter=FILTER
- Select filter:
- --filter-normal
- 0 - normal mode
- --filter-tv-mode
- 1 - TV Mode
- --filter-2xsai
- 2 - 2xSaI
- --filter-super-2xsai
- 3 - Super 2xSaI
- --filter-super-eagle
- 4 - Super Eagle
- --filter-pixelate
- 5 - Pixelate
- --filter-motion-blur
- 6 - Motion Blur
- --filter-advmame
- 7 - AdvanceMAME Scale2x
- --filter-simple2x
- 8 - Simple2x
- --filter-bilinear
- 9 - Bilinear
- --filter-bilinear+
- 10 - Bilinear Plus
- --filter-scanlines
- 11 - Scanlines
- --filter-hq2x
- 12 - hq2x
- --filter-lq2x
- 13 - lq2x
- -h, --help
- Print this help
- -i, --ips=PATCH
- Apply given IPS patch
- -p, --profile=[HERTZ]
- Enable profiling
- -s, --frameskip=FRAMESKIP
- Set frame skip (0...9)
- -t, --save-type=TYPE
- Set the available save type
- --save-auto
- 0 - Automatic (EEPROM, SRAM, FLASH)
- --save-eeprom
- 1 - EEPROM
- --save-sram
- 2 - SRAM
- --save-flash
- 3 - FLASH
- --save-sensor
- 4 - EEPROM+Sensor
- --save-none
- 5 - NONE
- -v, --verbose=VERBOSE
- Set verbose logging (trace.log) 1 - SWI 2 - Unaligned memory access 4 - Illegal memory write 8 - Illegal memory read
- 16 - DMA 0 32 - DMA 1 64 - DMA 2
- 128 - DMA 3 256 - Undefined instruction 512 - AGBPrint messages
Long options only:
- --agb-print
- Enable AGBPrint support
- --auto-frameskip
- Enable auto frameskipping
- --ifb-none
- No interframe blending
- --ifb-motion-blur
- Interframe motion blur
- --ifb-smart
- Smart interframe blending
- --no-agb-print
- Disable AGBPrint support
- --no-auto-frameskip
- Disable auto frameskipping
- --no-ips
- Do not apply IPS patch
- --no-mmx
- Disable MMX support
- --no-pause-when-inactive Don't pause when inactive
- --no-rtc
- Disable RTC support
- --no-show-speed
- Don't show emulation speed
- --no-throttle
- Disable thrrotle
- --pause-when-inactive
- Pause when inactive
- --rtc
- Enable RTC support
- --show-speed-normal
- Show emulation speed
- --show-speed-detailed
- Show detailed speed data
- -1, --video-1x
- 1x
- -2, --video-2x
- 2x
- -3, --video-3x
- 3x
- -4, --video-4x
- 4x
- -F, --fullscreen
- Full screen
- -G, --gdb=PROTOCOL
- GNU Remote Stub mode: tcp - use TCP at port 55555 tcp:PORT - use TCP at port PORT pipe - use pipe transport
- -N, --no-debug
- Don't parse debug information
- -S, --flash-size=SIZE
- Set the Flash size
- --flash-64k
- 0 - 64K Flash
- --flash-128k
- 1 - 128K Flash
- -T, --throttle=THROTTLE
- Set the desired throttle (5...1000)
- -Y, --yuv=TYPE
- Use YUV overlay for drawing: 0 - YV12 1 - UYVY 2 - YVYU 3 - YUY2 4 - IYUV
- -b, --bios=BIOS
- Use given bios file
- -c, --config=FILE
- Read the given configuration file
- -d, --debug
- Enter debugger
- -f, --filter=FILTER
- Select filter:
- --filter-normal
- 0 - normal mode
- --filter-tv-mode
- 1 - TV Mode
- --filter-2xsai
- 2 - 2xSaI
- --filter-super-2xsai
- 3 - Super 2xSaI
- --filter-super-eagle
- 4 - Super Eagle
- --filter-pixelate
- 5 - Pixelate
- --filter-motion-blur
- 6 - Motion Blur
- --filter-advmame
- 7 - AdvanceMAME Scale2x
- --filter-simple2x
- 8 - Simple2x
- --filter-bilinear
- 9 - Bilinear
- --filter-bilinear+
- 10 - Bilinear Plus
- --filter-scanlines
- 11 - Scanlines
- --filter-hq2x
- 12 - hq2x
- --filter-lq2x
- 13 - lq2x
- -h, --help
- Print this help
- -i, --ips=PATCH
- Apply given IPS patch
- -p, --profile=[HERTZ]
- Enable profiling
- -s, --frameskip=FRAMESKIP
- Set frame skip (0...9)
- -t, --save-type=TYPE
- Set the available save type
- --save-auto
- 0 - Automatic (EEPROM, SRAM, FLASH)
- --save-eeprom
- 1 - EEPROM
- --save-sram
- 2 - SRAM
- --save-flash
- 3 - FLASH
- --save-sensor
- 4 - EEPROM+Sensor
- --save-none
- 5 - NONE
- -v, --verbose=VERBOSE
- Set verbose logging (trace.log) 1 - SWI 2 - Unaligned memory access 4 - Illegal memory write 8 - Illegal memory read
- 16 - DMA 0 32 - DMA 1 64 - DMA 2
- 128 - DMA 3 256 - Undefined instruction 512 - AGBPrint messages
Long options only:
- --agb-print
- Enable AGBPrint support
- --auto-frameskip
- Enable auto frameskipping
- --ifb-none
- No interframe blending
- --ifb-motion-blur
- Interframe motion blur
- --ifb-smart
- Smart interframe blending
- --no-agb-print
- Disable AGBPrint support
- --no-auto-frameskip
- Disable auto frameskipping
- --no-ips
- Do not apply IPS patch
- --no-mmx
- Disable MMX support
- --no-pause-when-inactive Don't pause when inactive
- --no-rtc
- Disable RTC support
- --no-show-speed
- Don't show emulation speed
- --no-throttle
- Disable thrrotle
- --pause-when-inactive
- Pause when inactive
- --rtc
- Enable RTC support
- --show-speed-normal
- Show emulation speed
- --show-speed-detailed
- Show detailed speed data
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre