Rechercher une page de manuel
atari800.x11
Langue: en
Version: 314312 (ubuntu - 07/07/09)
Section: 1 (Commandes utilisateur)
Sommaire
NAME
atari800 - Atari 800 Emulator, Version 2.0.3SYNOPSIS
atari800 [options] [files...]DESCRIPTION
atari800 emulates the Atari 800, Atari 800 XL, Atari 130 XE and Atari 5200 Games System.Options
- -help
- Print complete and up-to-date list of command line switches
- -v
- Print emulator version
- -verbose
- Display framerate when exiting
- -config filename
- Specify an alternative configuration filename
- -osa_rom filename
- Path to file containing Atari Rev.A Operating System. Used to override paths defined at compile time.
- -osb_rom filename
- Path to file containing Atari Rev.B Operating System. Used to override paths defined at compile time.
- -xlxe_rom filename
- Path to file containing Atari XL/XE Operating System. Used to override paths defined at compile time.
- -5200_rom filename
- Path to file containing Atari 5200 Games System ROM. Used to override paths defined at compile time.
- -basic_rom filename
- Path to file containing Atari BASIC ROM. Used to override paths defined at compile time.
- -atari
- Emulate Atari 800
- -xl
- Emulate Atari 800 XL
- -xe
- Emulate Atari 130 XE
- -320xe
- Emulate Atari 320 XE (Compy Shop)
- -rambo
- Emulate Atari 320 XE (Rambo)
- -5200
- Emulate Atari 5200
- -emuos
- Use EmuOS
- -a
- Use Atari OS/A for Atari 800
- -b
- Use Atari OS/B for Atari 800
- -c
- Enable RAM between 0xc000 and 0xcfff in Atari 800
- -pal
- Emulate PAL TV mode
- -ntsc
- Emulate NTSC TV mode
- -nobasic
- Used to disable Basic when starting the emulator in XL/XE mode. Simulates the Option key being held down during system boot.
- -basic
- Turn on Atari BASIC ROM
- -cart <filename>
- Insert cartridge (CART or raw format)
- -run <filename>
- Run Atari program (EXE, COM, XEX, BAS, LST)
- -state <filename>
- Load saved-state file
- -tape <filename>
- Attach cassette image (CAS format or raw file)
- -boottape <filename>
- Attach cassette image and boot it
- -nopatch
- Normally the OS is patched giving very fast I/O. This options prevents the patch from being applied so that the OS accesses the serial port hardware directly. This option will probably never be needed since programs that access the serial hardware should work even if the OS has been patched.
- -nopatchall
- Don't patch OS at all, H: and P: devices won't work
- -H1 <path>
- Set path for H1: device
- -H2 <path>
- Set path for H2: device
- -H3 <path>
- Set path for H3: device
- -H4 <path>
- Set path for H4: device
- -Hpath <path>
- Set path for Atari executables on the H: device
- -hreadonly
- Enable read-only mode for H: device
- -hreadwrite
- Disable read-only mode for H: device
- -devbug
- Put debugging messages for H: and P: devices in log file
- -rtime
- Enable R-Time 8 emulation
- -nortime
- Disable R-Time 8 emulation
- -mouse off
- Do not use mouse
- -mouse pad
- Emulate paddles
- -mouse touch
- Emulate Atari Touch Tablet
- -mouse koala
- Emulate Koala Pad
- -mouse pen
- Emulate Light Pen
- -mouse gun
- Emulate Light Gun
- -mouse amiga
- Emulate Amiga mouse
- -mouse st
- Emulate Atari ST mouse
- -mouse trak
- Emulate Atari Trak-Ball
- -mouse joy
- Emulate joystick using mouse
- -mouseport <num>
- Set mouse port 1-4 (default 1)
- -mousespeed <num>
- Set mouse speed 1-9 (default 3)
- -multijoy
- Emulate MultiJoy4 interface
- -refresh
- Controls screen refresh rate. A numerical value follows this option which specifies how many emulated screen updates are required before the actual screen is updated. This value effects the speed of the emulation: A higher value results in faster CPU emulation but a less frequently updated screen.
- -artif <mode>
- Set artifacting mode 0-4 (0 = disable)
- -palette <filename>
- Read Atari colors from ACT file
- -black <num>
- Set black level 0-255
- -while <num>
- Set white level 0-255
- -colors <num>
- Set color intensity
- -genpal
- Generate artifical palette
- -colshift <num>
- Set color shift (-genpal only)
- -screenshots <pattern>
- Set filename pattern for screenshots. Use to override the default atari000.png, atari001.png etc. filenames. Hashes are replaced with raising numbers. Existing files are overwritten only if all the files defined by the pattern exist.
- -sound
- Enable sound
- -nosound
- Disable sound
- -dsprate <freq>
- Set mixing frequency (Hz)
- -snddelay <time>
- Set sound delay (milliseconds)
Curses Options
- -left
- Use columns 0 to 39
- -central
- Use columns 20 to 59
- -right
- Use columns 40 to 79
- -wide1
- Use columns 0 to 79. In this mode only the even character positions are used. The odd locations are filled with spaces.
- -wide2
- Use columns 0 to 79. This mode is similar to -wide1 except that the spaces are in reverse video if the previous character was also in reverse video.
DOS/VGA Options
- -interlace
- Generate screen with interlace
- -video <mode>
- 0=320x200, 1=320x240, 2=320x480 interlaced with black lines, 3=320x480 interlaced with darker lines
- -novesa
- Do not use VESA 2 video modes
- -vretrace
- Use vertical retrace control
- -LPTjoy1
- Read joystick connected to LPT1
- -LPTjoy2
- Read joystick connected to LPT2
- -LPTjoy3
- Read joystick connected to LPT3
- -joyswap
- Swap joysticks
- -keyboard 0
- PC keyboard layout
- -keyboard 1
- Atari keyboard layout
Falcon Options
- -interlace <x>
- Generate Falcon screen only every x frame
- -videl
- Direct VIDEL programming (Falcon/VGA only)
- -double
- Double the screen size on NOVA
- -delta
- Delta screen output (differences only)
SDL Options
- -fullscreen
- Start in fullscreen mode (tries to switch to 336x240 resolution)
- -windowed
- Start in a window (does not change your working resolution)
- -rotate90
- Run the emulator with rotated display (useful for devices with 240x320 screen)
- -width number-of-pixels
- Host horizontal resolution for fullscreen
- -height number-of-pixels
- Host vertical resolution for fullscreen
- -bpp number-of-bits
- Host color depth for running in fullscreen
- -audio16
- Enable 16-bit sound output
- -nojoystick
- Do not initialize SDL joysticks
- -joy0 path-to-device
- Define path to device used in LPTjoy 0. Available on linux-ia32 only.
- -joy1 path-to-device
- Define path to device used in LPTjoy 1. Available on linux-ia32 only.
SVGALIB Options
- -interlace
- Enable screen interlace option
X11 Options
- -small
- Run the emulator in a small window where each Atari 800 pixel is represented by one X Window pixel
- -large
- Runs the emulator in a large window where each Atari 800 pixel is represented by a 2x2 X Window rectange. This mode is selected by default.
- -huge
- Runs the emulator in a huge window where each Atari 800 pixel is represented by a 3x3 X Window rectange
- -clip_x number-of-pixels
- Set left offset for clipping
- -clip_width number-of-pixels
- Set the width of the clipping-area
- -clip_y number-of-pixels
- Set top offset for clipping
- -clip_height number-of-pixels
- Set the height of the clipping-area
- -private_cmap
- Use private colormap
- -fps
- Show framerate
- -sio
- Show SIO monitor
- -x11bug
- Enable debug code in atari_x11.c
- -keypad
- Keypad mode
KEYBOARD, JOYSTICK AND OTHER CONTROLLERS
- F1
- Built in user interface
- F2
- Option key
- F3
- Select key
- F4
- Start key
- F5
- Reset key ("warm reset")
- Shift+F5
- Reboot ("cold reset")
- F6
- Help key (XL/XE only)
- F7
- Break key
- F8
- Enter monitor
- F9
- Exit emulator
- F10
- Save screenshot
- Shift+F10
- Save interlaced screenshot
- Alt+R
- Run Atari program
- Alt+D
- Disk management
- Alt+C
- Cartridge management
- Alt+Y
- Select system
- Alt+O
- Sound settings
- Alt+W
- Sound recording start/stop
- Alt+S
- Save state file
- Alt+L
- Load state file
- Alt+A
- About the emulator
Paddles, Atari touch tablet, Koala pad, light pen, light gun, ST/Amiga mouse, Atari trak-ball, joystick and Atari 5200 analog controller are emulated using mouse on ports that support it. See the options above for how to enable mouse.
Curses
F10 (Save screenshot) does not work in the default CURSES_BASIC build. Shift+F5 and Shift+F10 don't work at all. Avoid Ctrl + C, H, J, M, Q, S and Z. The remaining control characters can be typed. Control characters are displayed on the screen with the associated upper case character in bold.
Controllers not supported in this version.
DOS/VGA
- F7
- Switch between Emulated joysticks mode and Normal keyboard
- `
- Atari/Inverse key
Joysticks can be either real one connected to game port, or old 8-bit digital CX-40 joysticks connected to parallel port or keyboard joysticks (try out JOYCFG.EXE).
Falcon
- Help
- Help key (XL/XE)
Joystick 0 is operated by the numeric keypad (make sure that the numeric keypad has been enabled).
7 8 9
\|/
4 5 6
/|\
1 2 3
And 0 is the fire key.
Mouse not supported in this version.
SDL
- LAlt+F
- Switch fullscreen (probably doesn't work in Windows)
- LAlt+G
- Switch WIDTH_MODE (so you can set 320x240)
- LAlt+B
- Switch BLACK-AND-WHITE
- LAlt+J
- Swap keyboard_emulated joysticks
- LAlt+E
- Switch bpp (for debug only, will be removed soon)
To redefine keys for joystick emulation you must modify SDL_TRIG_* and SDL_JOY_* in atari_sdl.c, then recompile Atari800. In source you can also turn off sound or change defaults (FULLSCREEN, BW, SWAP_JOYSTICKS, WIDTH_MODE).
On Linux, standard joysticks are supported.
SVGALIB
- F11
- Joystick autofire on/off
- `
- Caps key
The Ctrl+Shift keyboard combinations are implemented using the left Alt key.
Joystick 0 is operated by the numeric keypad (make sure that the numeric keypad has been enabled).
7 8 9
\|/
4 5 6
/|\
1 2 3
And 0 is the fire key.
Mouse not supported in this version.
X11
- Alt
- Atari key (either Alt key will work)
Joystick 0 is operated by the mouse position relative to the center of the screen. The mouse button acts as the trigger. On Linux, standard joysticks are also supported.
FILES
- /usr/share/atari800/ATARIOSA.ROM
- Atari O/S A
- /usr/share/atari800/ATARIOSB.ROM
- Atari O/S B
- /usr/share/atari800/ATARIXL.ROM
- Atari 800 XL O/S
- /usr/share/atari800/ATARI5200.ROM
- Atari 5200 O/S
- /usr/share/atari800/ATARIBAS.ROM
- Atari Basic
BUGS
See the BUGS file.Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre