Rechercher une page de manuel
cd-circleprint
Langue: en
Version: 2010-06-04 (ubuntu - 24/10/10)
Section: 1 (Commandes utilisateur)
NAME
cd-circleprint - create a round label for a CDSYNOPSIS
- cd-circleprint [option[=value..]] FILE
DESCRIPTION
cd-circleprint prints two round labels for CDs. It uses up to four lines of text for each label, this is printed in arcs so the text can be much longer than if it were in straight lines. There are four additional straight text fields for each label.The output is in PostScript, this should work on most systems.
You can select the font, size, and colour of the text for each field separately, and you can choose the background colour for each label. An image file in EPS format may also be used as a background. If you wish more complicated backgrounds or colour effects you can save a label and modify it in any graphic program which can read PostScript.
OPTIONS
- --config
- Alternative configuration file.
- --debug
- Enable debuggging mode, various information is printed to standard output.
- --version
- Print version number and exit successfully.
LAYOUT
All layout is done in PostScript, this should work on most systems.The result of the layout are two cd-labels on one sheet of paper. On each label there are two convex and two concave lines of text. If you have a very long line of text, you can use only one line and make it longer. There are no limits to the length of text. However, after 360 degrees the ends of the text will overlap.
There are also four text fields on each label with normal horizontal lines of text. These text fields are specified in clockwise order: above, right, below, and left of the central hole.
The colours are done in the RGB-model of PostScript, you can choose them for each line and the background of the label independently.
You can move the circles around the sheet to fit them on most types of label-sheets.
You can also squeeze or stretch the whole thing to correct small errors of your printer.
USAGE
After starting the program you see sixteen text-entry fields divided into two blocks. The upper block is for the arcs, the lower block is for the straight text fields.Each label has four text fields and four arcs.
The first two lines are for the upper arcs on the label and the last two for the lower arcs.
Write your text in the fields (support for cddb is on the TODO list)
The Save Image menu item creates a postscript file of the label. A file selection dialogue is displayed so the user can specify the path and filename.
Font attributes and colours can be changed interactively using a dialog available from the menu.
- Shortcuts
-
Control-l: write the label to /tmp Control-p: preview the label Control-q: quit Control-s: save the configuration
- File Menu
-
-
- New
- Start a new label, all label fields are cleared and parameters are reset to default values.
- Open
- A file selection dialog is displayed so that the user can select a label data file which is then used to set the label values.
- Save
- The current label data values are saved using the current filename.
- Save As
- A file selection dialog is displayed and the current label data values are saved to the file specified by the user.
- Load Form Data
- Load Form (Paper Layout) data from a specified file.
- Save Form Data
- Save Form Data to a specified file.
- Save Image
- Save an image of the labels as a specified Postscript File.
- Preview
- Launch the predefined preview appplication to preview the labels.
- Exit
- Exit the program, all unsaved data will be lost.
-
- Format Menu
-
-
- Fonts & Colours
- Change font family, font size, font-colour and the background colour interactively, all changes should take effect immediately in the text entry fields.
Note, perl-tk uses the nearest match for the font. The labels may look different on your printer.
- Angle
- Sets the angle by which the centre of the text arcs are offset.
- Radii
- Specify the size of the label inner circle and the radii of the text circles.
- Page Deformation
- Some printers do not work correctly with circles and produce an ellipse, you can squeeze or stretch the whole page to get perfect circles with your printer.
- Positions
- You can move the circles around the page using this menu.
- Top Label / Bottom Label
- Select which labels will be generated. The input fields for unselected labels are disabled.
- Tickmarks
- There are many cd-label sheets on the market, so you can move the circles around the page. To make this easier, you can print some tickmarks on the page to measure the distances. If you have the correct values, you don't need these tickmarks any more and can save some ink.
- Circle Boundaries
- This allows the user to turn off the printing of the circles which show the boundaries of the labels.
- Graphics
- You can put an image on the label. This image currently has to be in eps-format.
I thought about automatic scaling, but the program would have to know the real size of the visible part of the graphic instead of just the bounding box.
The scaling and shifting should be self-explanatory. The program gets the bounding box of the eps image and puts the image in the middle of the label.
-
- Options Menu
-
-
- Previewer
- Select the application to use for previewing the labels.
- Graphics Converter
- Select the application to use for converting graphics to eps format.
- Load Options
- Load program options from configuration files, this is useful to reset the configuration to a known state.
- Save Options
- Save the current program configuration to either the user specified configuration file or to the default file if the user did not specify one.
-
- Help Menu
-
-
- Help
- Display this man page.
- About
- Display program version, description and copyright information.
-
CONFIGURATION
You can save your configuration in a file in your $HOME or ask your sysadmin to create a global configuration-file.FILES
There is a global configuration file /etc/cd-circleprint.conf and a local configuration file $HOME/.cd-circleprint.confYou can specify a configuration file on the command line in which case the default configuration file settings can be overridden. For the format of the configuration files take a look at them. Comments start with a # and blank lines are ignored.
The program sets its internal default values, looks for the global configuration file, then for the local configuration file and finally for a user specified file.
Label data is read from a similar format file either specified on the command line or selected from a file dialog.
BUGS
There are probably many bugs, please fix them and send me a patch. ThanksAUTHORS
cd-circleprint is written and maintained by Colin Tuckley <colintu@users.sourceforge.net> cd-circleprint was originally written by Matthias Kabel <matthias.kabel@tyche.de>You can find the latest version at http://cd-circle-print.sourceforge.net
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Thanks to sourceforge.net for hosting free software
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre