Rechercher une page de manuel

Chercher une autre page de manuel:

cdp

Langue: en

Autres versions - même langue

Version: January 1, 2003 (ubuntu - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

cdp - cdp packet generator

SYNOPSIS

cdp -i <interface> [-v -n x -l x -c c -r] [-D <string> -P <string> -L <string> -S <string> -F <ip address> -C <capabilities>]

DESCRIPTION

This manual page documents briefly the cdp command. This manual page was written for the Debian distribution because the original program does not have a manual page.

CDP is a layer 2 protocol used by Cisco routers to discover each other on the same link (segment). This protocol is not routed and therefore this tool is just usefull in the local segment.

CDP messages contain information about the sending Cisco router. These include the device ID (hostname), port ID (which port was the sender), the platform running on, the software incl. version, what the box is capable of and which network address (IP address) the interface has. If not configured otherwise, Cisco routers send these messages out every 30 seconds. In our case (ethernet), they are send to a special MAC address (01:00:0C:CC:CC:CC) and therefore are received from every Cisco router in the same segment. Other routers store the data and hold it for a time defined in the message (the tool uses the maximum of 255 seconds).

Very interesting is, that Cisco IOS uses the device ID as key to find out if the received message is an update and the neighbor is already known or not. If the device ID is to long, this test seems to fail and you constantly fill up the routers memory.

The CDP tool can be used in two different modi:

The flood mode is used to send garbage CDP messages to the wire, which has different effects to the routers depending on their IOS version. It is not tested very well, which version of IOS reacts in which way on which kind of Cisco hardware. So if you come across somthing, please report it. IOS 11.1(1) was tested and the router could match even long device idÂŽs but rebooted after receiving three or four random device id names. Most other IOS versions just store the message and fill up the memory. When you try to debug CDP events, all IOS we tested crashed and reboot.

To use CDP, you have to specify the ethernet interface you will be working on: -i eth0

Everything else is optional.

-v verbose

-n x send x packets

-l x length of the device id string. Keep in mind, that the
       whole ethernet frame has to be smaller the 1514 bytes. 
       The maximum length is therefore 1480 for the device id 
       (default is 1400)

-c c fills the device id with the char 'c' (default is 'A')

-r makes the device id a random string of characters, which
       leads to no matching on the receiver Cisco and to memory fillup 
       or crash

Example:

Hint: if you want to flood the routers completly, start two processes of cdp with different sizes. One of them running on full size (1480) to fill up the major part of the memory and another to fill up the rest with a length of 10 octets.

The second mode for CDP is spoofing. You can enable this mode with the command line option -m 1. It has no actuall use for attacking router and is mostly targeted fro social engineering or just to confuse the local administrator. It is used to send out 100% valid CDP infromation packets which look like generated by other Cisco routers. Here, you can specify any part of a CDP message yourself.

-i <interface> ethernet interface

-v verbose

-D <string> device id string

-P <string> port id string

-L <string> platform string

-S <string> software string

-F <ip address> ip address of the interface

-C <capabilities> the capabilities of the device you are claiming to be:
              R - Router, T - Trans Bridge, B - Source Route Bridge,
              S - Switch, H - Host, I - IGMP, r - Repeater
              Combine the letters to a string: RI means Router and IGMP

Example:

Which results on the cisco router in the following information:

cisco#sh cdp neig detail

-------------------------

Device ID: Linuxfirewall

Entry address(es):

IP address: 10.1.1.1

Platform: Intel, Capabilities: Router

Interface: Ethernet0, Port ID (outgoing port): Ethernet0

Holdtime : 238 sec

Version :

Linux vince 2.4.18-686 #1 Sun Apr 14 11:32:47 EST 2002 i686 unknown unknown GNU/Linux

AUTHOR

This manual page was written by Vince Mulhollon <vlm@debian.org>, for the Debian GNU/Linux system (but may be used by others).
Que sont mes amis devenus
Que j'avais de si près tenus
Et tant aimés !
-+- Rutebeuf (fin du XIIIème siècle),
La Complainte de Rutebeuf (vers 109-111) -+-