Rechercher une page de manuel
cnee
Langue: en
Version: 2007 (ubuntu - 24/10/10)
Section: 1 (Commandes utilisateur)
Sommaire
NAME
cnee record, replays or distributes X11 dataSYNOPSIS
cnee [options]DESCRIPTION
The program cnee can record and replay an X session. cnee also has the ability to distribute events to multiple displays. cnee gets copies of X protocol data from the X server. These are either printed to file ( record mode) or replayed and synchronised ( replay mode). During record and replay cnee can distribute the record/replayed events to multiple displays.GENERAL OPTIONS
- --err-file,- e <file>
- Redirect all Xnee verbose output file_name(default is stderr)
- --out-file,- o <file>
- Redirect all Xnee data to file_name(default is stdout)
- --display,- d <displayname>
- X server to contact (default is localhost)
- --all-clients,- ac
- Record all client's data (default)
- --future-clients
- Record future client's data
- --data-to-record,- dtr <n>
- Intercept n numbers of data ( n<0 means forever)
- --time,- t <secs>
- Delay start of application for <secs> seconds. Can be used to prevent recording of KeyRelease when starting Xnee from terminal
- --record,- rec
- Set recording mode
- --replay,- rep
- Set replaying mode
- --distribute,- di <LIST>
- Distribute recorded or replayed events to LIST where LIST is comma separated list of displays
- --future-clients,- fc
- Record future client's data (default)
- --plugin,- p <name
- Use the plugin name
- --verbose,- v
- Enable verbose printout
- --feedback-xosd,- fx
- Use xosd to feedback
- --feedback-stderr,- fs
- Use stderr to feedback
- --feedback-none,- fn
- Dont' use feedback
- --device-event-range,- devera <X_LIST>
- Set device event range to X_LIST
- --keep-autorepeat,- ka
- Keep autorepeat during record/replay
- --no-reparent-recording,- nrr
- Prevent explicit recording of ReparentNotify event
RECORD OPTIONS
- --first-last
- Print only first and last of multiple successive MotionEvent
- --all-events
- Intercept all events
- --events-to-record,- etr <n>
- Intercept n numbers of events ( n<0 means forever)
- --seconds-to-record,- str <n>
- Intercept for n seconds ( n<0 means forever)
- --recorded-resolution <res>
- Resolution to use when recording is set to res
- --human-printout,- hp
- Prints human readable
- --store-mouse-position,- smp
- Store the initial position of the mouse
- --request-range,- reqra <X_LIST>
- Set request range to X_LIST
- --reply-range,- repra <X_LIST>
- Set reply range to X_LIST
- --delivered-event-range,- devra <X_LIST>
- Set delivered event range to X_LIST
- --error-range,- erra <X_LIST>
- Set error range to X_LIST
- --extension-request-major-range,- erqmar <X_LIST>
- Set extension request major range to X_LIST
- --extension-request-minor-range,- erqmir <X_LIST>
- Set extension request minor range to X_LIST
- --extension-reply-major-range,- erpmar <X_LIST>
- Set extension reply major range to X_LIST
- --extension-reply-minor-range,- erpmir <X_LIST>
- Set extension reply minor range to X_LIST
REPLAY OPTIONS
- --speed-percent,- sp <speed>
- Set replaying speed percentage is set to speed
- --replay-resolution <res>
- Resolution to use when replaying is set to res
- --resolution-adjustment
- Use resolution adjustment
- --synchronised-replay
- Synchronise during replay
- --no-synchronise,- ns
- Don't use synchornisation during replay
- --recall-window-position,- rwp
- Recall the recorded window position to be used during replay
- --force-replay,- fp
- Keep replaying even if we are out of sync .... dangerous
- --buffer-verbose,- bv
- Enable verbose printout of replay buffer
- --max-threshold,- mat <nr>
- Set the maximum threshold for sync to nr
- --min-threshold,- mit <nr>
- Set the minimum threshold for sync to tnr
- --tot-threshold,- tot <nr>
- Set the total threshold for sync to nr
- --replay-offset,- ro <x,y>
- Set the replay offset to (x,y)
CNEE OPTIONS
- --file,- f <file_name>
- Read data from file file_name (default is stdin)
- --help,- h
- Print this message
- --flags
- Prints all flags/options xnee accepts
- --project,- pr <file_name>
- Use project file file_name
- --version,- V
- Print product information
- --retype-file <file>
- Types (faking user) the contents of the specified file
- --write-settings <file>
- Writes settings to a resource file
- --print-settings,- ps
- Prints Xnee settings and waits (for <ENTER>)
- --print-event-names,- pens
- Prints X11 event number and name
- --print-event-name,- pen <ev>
- Prints X11 event number or name coresponding to ev
- --print-error-names,- perns
- Prints X11 error number and name
- --print-error-name,- pern <er>
- Prints X11 error number or name coresponding to er
- --print-reply-names,- pren
- Prints X11 reply number and name
- --print-request-names,- prns
- Prints X11 request number and name
- --print-request-name,- prn <req>
- Prints X11 request number or name coresponding to req
- --keyboard
- Record the keyboard
- --mouse
- Record mouse events
- --print-data-names,- pdn
- Prints X11 data number and name
- --manpage
- Prints Xnee help text in format as used when generating man page
- --texipage
- Prints Xnee help text in format as used when generating info page
- --type-help
- Type this help message using faked keys (used to test xnee itself)
- --demonstration,- demo
- Let Xnee take you on a demonstration ride
- --check-syntax,- cs
- Check syntax of the command line and/or project file (no exec)
COMMENTS
- file_name
- Name of a file (e.g /tmp/my_file.xns)
- display_name
- Name of a display (e.g 192.168.1.12:0
- secs
- Seconds (e.g 10)
- n
- Integer number (e.g 100)
- LIST
- Comma separated list of display (e.g 192.168.1.12:0,129.12.23.0:0)
- X_LIST
- Comma separated list of integers (e.g 12-23,35,45-56)
EXAMPLES
- cnee --record --events-to-record 1000 --mouse --keyboard -o /tmp/xnee.xns -e /tmp/xnee.log -v
-
Records 1000 events (keyboard and mouse) to file /tmp/xnee.xns and dumps the verbose printout to /tmp/xnee.log
- cnee --replay -f /tmp/xnee.xns -v -e /tmp/xnee.log --no-sync
-
Read data from /tmp/xnee.xns, replay it and verbose print to file /tmp/xnee.log
- For more examples, read the Xnee manual
AUTHOR
Henrik Sandklef.REPORTING BUGS
Report bugs in the program to bug-xnee@gnu.org.COPYRIGHT
Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007 Henrik Sandklef. This is free software; see the source for copying conditions. There is NO warranty;not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.SEE ALSO
cnee(info),xnee(info),xev(1)VERSION
xnee man page, version 3.06NOTES
This page describes cnee. Mail corrections and additions to bug-xnee@gnu.orgContenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre