d64copy

Langue: en

Version: April 2006 (mandriva - 01/05/08)

Section: 1 (Commandes utilisateur)

Sommaire

NAME

d64copy - manual page for d64copy 0.4.2

SYNOPSIS

d64copy [OPTION]... [SOURCE] [TARGET]

DESCRIPTION

Copy .d64 disk images to a CBM-1541 or compatible drive and vice versa

Options:

-h, --help
display this help and exit
-V, --version
display version information and exit
-q, --quiet
quiet output
-v, --verbose
control verbosity (repeatedly, up to 3 times)
-n, --no-progress
do not display progress information
-s, --start-track=TRACK
set start track
-e, --end-track=TRACK
set end track (start <= end <= 42/70)
-t, --transfer=TRANSFER
set transfermode; valid modes: auto (default) original (slowest) serial1 or s1 serial2 or s2 parallel (fastest)
(can be abbreviated, if unambiguous) `original' and `serial1' should work in any case; `serial2' won't work if more than one device is connected to the IEC bus; `parallel' needs a XP1541/XP1571 cable in addition to the serial one. `auto' tries to determine the best option.
-i, --interleave=VALUE
set interleave value; ignored when reading with warp mode; default values are:
original
16
turbo r/w
warp write
serial1
4 6
serial2
13 12
parallel
7 4
INTERLEAVE is ignored when reading with warp mode; if data transfer is very slow, increasing this value may help.
-w, --warp
enable warp mode; this is not possible if TRANSFER is set to `original' This is the default if transfer is not `original`.
--no-warp
disable warp mode; this is the default if TRANSFER is set to `original'.
-b, --bam-only
BAM-only copy; only allocated blocks are copied; for extended tracks (36-40), SpeedDOS BAM format is assumed. Use with caution.
-B, --bam-save
save BAM-only copy; this is like the `-b' option but copies always the entire directory track.
-d, --drive-type=TYPE
specify drive type: 0 or 1541 = 1541 1 or 1571 = 1570/1571
-r, --retry-count=COUNT
set retry count
-E, --error-map=WHEN
control whether the error map is appended. possible values for WHEN are (abbreviations available):
always on_errors (default) never
-2, --two-sided
two-sided disk transfer (.d71): Requires 1571. Warp mode is not available for .d71 images.