dcmpsprt

Langue: en

Version: 262818 (debian - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

dcmpsprt - Read DICOM images and presentation states and render print job

SYNOPSIS

 
 dcmpsprt [options] [imagefile_in...]
 

DESCRIPTION

The dcmpsprt utility reads one or more DICOM images and presentation states and creates a print job. The print job consists of one Stored Print object and one or more Hardcopy Grayscale images and is written to the database specified in the configuration file. The print job can optionally be spooled to the printer. In this case, dcmpsprt calls the dcmprscu application which performs communication with the printer.

PARAMETERS

 
 imagefile_in  DICOM image file(s) to be printed
 

OPTIONS

general options

 
   -h   --help
          print this help text and exit
 
        --version
          print version information and exit
 
   -v   --verbose
          verbose mode, print actions
 
   -d   --debug
          debug mode, print debug information
 

processing options

 
   +p   --pstate  [p]state-file: string
          render the following image with pres. state p
 
   -c   --config  [f]ilename: string
          process using settings from configuration file f
 
   -p   --printer  [n]ame: string (default: 1st printer in cfg file)
          select printer with identifier n from cfg file
 

spooling options

 
   -s   --spool
          spool print job to DICOM printer
 
        --nospool
          do not spool print job to DICOM printer (default)
 

film orientation options

 
        --portrait
          set portrait orientation
 
        --landscape
          set landscape orientation
 
        --default-orientation
          use printer default (default)
 

trim (border) options

 
        --trim
          set trim on
 
        --no-trim
          set trim off
 
        --default-trim
          use printer default (default)
 

requested decimate/crop behaviour options

 
        --request-decimate
          request decimate
 
        --request-crop
          request crop
 
        --request-fail
          request failure
 
        --default-request
          use printer default (default)
 
 
        --default-plut
          do not create presentation LUT (default)
 
        --identity
          set IDENTITY presentation LUT shape
 
        --plut  [l]ut identifier: string
          add LUT l to print job
 
        --inverse-plut
          render the inverse presentation LUT into the
          bitmap of the hardcopy grayscale image
 
        --illumination  [v]alue: integer (0..65535)
          set illumination to v (in cd/m^2)
 
        --reflection  [v]alue: integer (0..65535)
          set reflected ambient light to v (in cd/m^2)
 

basic film session options (only with --spool)

 
        --copies  [v]alue: integer (1..100, default: 1)
          set number of copies to v
 
        --medium-type  [v]alue: string
          set medium type to v
 
        --destination  [v]alue: string
          set film destination to v
 
        --label  [v]alue: string
          set film session label to v
 
        --priority  [v]alue: string
          set print priority to v
 
        --owner  [v]alue: string
          set film session owner ID to v
 

annotation options

 
        --no-annotation
          do not create annotation (default)
 
   -a   --annotation  [t]ext: string
          create annotation with text [t]
 
   +pd  --print-date
          prepend date/time to annotation (default)
 
   -pd  --print-no-date
          do not prepend date/time to annotation
 
   +pn  --print-name
          prepend printer name to annotation (default)
 
   -pn  --print-no-name
          do not prepend printer name to annotation
 
   +pl  --print-lighting
          prepend illumination to annotation (default)
 
   -pl  --print-no-lighting
          do not prepend illumination to annotation
 

overlay options

 
   +O   --overlay  [f]ilename : string, [x] [y] : integer
          load overlay data from PBM file f and display at position (x,y)
 
   +Og  --ovl-graylevel  [v]alue: integer (0..4095)
          use overlay gray level v (default: 4095 = white)
 

other_print_options

 
   -l   --layout  [c]olumns [r]ows: integer (default: 1 1)
          use 'STANDARD,r' image display format
        --filmsize  [v]alue: string
          set film size ID to v
 
        --magnification  [v]alue: string
          set magnification type to v
 
        --smoothing  [v]alue: string
          set smoothing type to v
 
        --configinfo  [v]alue: string
          set configuration information to v
 
        --resolution  [v]alue: string
          set requested resolution ID to v
 
        --border  [v]alue: string
          set border density to v
 
        --empty-image  [v]alue: string
          set empty image density to v
 
        --max-density  [v]alue: string
          set max density to v
 
        --min-density  [v]alue: string
          set min density to v
 
        --img-polarity  [v]alue: string
          set image box polarity to v (NORMAL or REVERSE)
 
        --img-request-size  [v]alue: string
          set requested image size to v (width in mm)
 
        --img-magnification  [v]alue: string
          set image box magnification type to v
 
        --img-smoothing  [v]alue: string
          set image box smoothing type to v
 
        --img-configinfo  [v]alue: string
          set image box configuration information to v
 

COMMAND LINE

All command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n values.

Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mutually exclusive the rightmost appearance is used. This behaviour conforms to the standard evaluation rules of common Unix shells.

In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. @command.txt). Such a command argument is replaced by the content of the corresponding text file (multiple whitespaces are treated as a single separator) prior to any further evaluation. Please note that a command file cannot contain another command file. This simple but effective approach allows to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file share/data/dumppat.txt).

ENVIRONMENT

The dcmpsprt utility will attempt to load DICOM data dictionaries specified in the DCMDICTPATH environment variable. By default, i.e. if the DCMDICTPATH environment variable is not set, the file <PREFIX>/lib/dicom.dic will be loaded unless the dictionary is built into the application (default for Windows).

The default behaviour should be preferred and the DCMDICTPATH environment variable only used when alternative data dictionaries are required. The DCMDICTPATH environment variable has the same format as the Unix shell PATH variable in that a colon (':') separates entries. The data dictionary code will attempt to load each file specified in the DCMDICTPATH environment variable. It is an error if no data dictionary can be loaded.

FILES

etc/dcmpstat.cfg, etc/printers.cfg - sample configuration files

SEE ALSO

dcmprscu(1)

Copyright (C) 1999-2004 by Kuratorium OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany.