Rechercher une page de manuel
djvused
Langue: en
Version: 5/22/2005 (fedora - 01/12/10)
Section: 1 (Commandes utilisateur)
Sommaire
NAME
djvused - Multi-purpose DjVu document editor.SYNOPSIS
djvused [options] djvufileDESCRIPTION
Program djvused is a powerful command line tool for manipulating multi-page documents, creating or editing annotation chunks, creating or editing hidden text layers, pre-computing thumbnail images, and more. The program first reads the DjVu document djvufile and executes a number of djvused commands.Djvused commands can be read from a specific file (when option -f is specified), read from the command line (when option -e is specified), or read from the standard input (the default).
OPTIONS
- -v
- Cause djvused to print a command line prompt before reading commands and a brief message describing how each command was executed. This option is very useful for debugging djvused scripts and also for interactively entering djvused commands on the standard input.
- -f scriptfile
- Cause djvused to read commands from file scriptfile.
- -e command
- Cause djvused to execute the commands specified by the option argument commands. It is advisable to surround the djvused commands by single quotes in order to prevent unwanted shell expansion.
- -s
- Cause djvused to save the file djvufile after executing the specified commands. This is similar to executing command save immediately before terminating the program.
- -n
- Cause djvused to disregard save commands. This is useful for debugging djvused scripts without overwriting files on your disk.
DJVUSED EXAMPLES
There are many ways to use program djvused. The following examples illustrate some common uses of this program.Obtaining the size of a page
Command size outputs the width and height of the selected pages using a HTML friendly syntax. For instance, the following command prints the size of page 3 of document myfile.djvu.- djvused myfile.djvu -e 'select 3; size'
Extracting the hidden text
Command print-pure-txt outputs the text associated with a page or a document. For instance, the following shell command outputs the text for the entire document. Lines and pages are delimited by the usual control characters.- djvused myfile.djvu -e 'print-pure-txt'
Command print-txt produces a more extensive output describing the structure and the location of the text components. The syntax of this output is described later in this man page. For instance, the following shell command outputs extended text information for page 3 of document myfile.djvu.
- djvused myfile.djvu -e 'select 3; print-txt'
Extracting the annotations
Annotation data can be extracted using command print-ant. The syntax of the annotation data is described later in this man page. For instance, the following shell command outputs the annotation data for the first page of document myfile.djvu.- djvused myfile.djvu -e 'select 1; print-ant'
Command print-ant only prints the annotations stored in the selected component file. Command print-merged-ant also retrieves annotations from all the component files referenced by the current page (using INCL chunks) and prints the merged information.
Dumping/restoring annotations and text
Three commands, output-txt, output-ant, and output-all, produce djvused scripts. For instance, the following shell command produces a djvused script, myfile.dsed, that recreates all the text and annotation data in document myfile.djvu.- djvused myfile.djvu -e 'output-all' > myfile.dsed
Script myfile.dsed is a text file that can be easily edited. The following shell command then recreates the text and annotation information in file myfile.djvu.
- djvused myfile.djvu -f myfile.dsed -s
Extracting a page
Both commands save-page and save-page-with create a DjVu file representing the selected component file of a document. The following shell command, for instance, creates a file p05.djvu containing page 5 of document myfile.djvu.- djvused myfile.djvu -e 'select 5; save-page p05.djvu'
Each page of a document might import data from another component file using the so-called inclusion ( INCL ) chunks. Command save-page then produces a file with unresolved references to imported data. Such a file should then be made part of a multi-page document containing the required data in other component files. On the other hand, command save-page-with copies all the imported data into the output file. This file is directly usable. Yet collecting several such files into a multi-page document might lead to useless data replication.
Pre-computing thumbnails
Commands set-thumbnails constructs thumbnails that can be later displayed by DjVu viewers. The following shell command, for instance, computes thumbnails of size 64x64 pixels for all pages of file myfile.djvu.- djvused myfile.djvu -e 'set-thumbnails 64' -s
DJVUSED COMMANDS
Command lines might contain zero, one, or more djvused commands and an optional comment. Multiple djvused commands must be separated by a semicolon character ';'. Comments are introduced by the '#' character and extend until the end of the command line.Selection commands
Multi-page DjVu documents are composed of a number of component files. Most component files describe a specific page of a document. Some component files contain information shared by several pages such as shared image data, shared annotations or thumbnails. Many djvused commands operate on selected component files. All component files are initially selected. The following commands are useful for changing the selection.- n
- Print the total number of pages in the document.
- ls
- List all component files in the document. Each line contains an optional page number, a letter describing the component file type, the size of the component file, and identifier of the component file. Component file type letters P, I, A, and T respectively stand for page data, shared image data, shared annotation data, and thumbnail data. Page numbers are only listed for component files containing page data. When it is set, the optional page title (see command set-page-title below) is displayed after the component file identifier.
- select [fileid]
- Select the component file identified by argument fileid. Argument fileid must be either a page number or a component file identifier. The select command selects all component files when the argument fileid is omitted.
- select-shared-ant
- Select a component file containing shared annotations. Only one such component file is supported by the current DjVu software. This component file usually contains annotations pertaining to the whole document as opposed to specific pages. An error message is displayed if there is no such component file.
- create-shared-ant
- Create and select a component file containing shared annotations. This command only selects the shared annotation component file if such a component file already exists. Otherwise it creates a new shared annotation component file and makes sure that it is imported by all pages in the document.
Text and annotation commands
- print-pure-txt
- Print the text stored in the hidden text layer of the selected pages. A similar capability is offered by program djvutxt. Structural information is sometimes represented by control characters. Text from different pages is delimited by form feed characters ("\f"). Lines are delimited by newline characters ("\n"). Columns, regions, and paragraphs are sometimes delimited by vertical tab ("\013"), group separators ("\035") and unit separators ("\037") respectively.
- print-txt
- Prints extensive hidden text information for the selected pages. This information describes the structure of the text on the document page and locates the structural elements in the page image. The syntax of this output is described later in this man page.
- remove-txt
- Remove the hidden text information from the selected component files. For instance, executing commands select and remove-txt removes all hidden text information from the DjVu document.
- set-txt [djvusedtxtfile]
- Insert hidden text information into the selected pages. The optional argument djvusedtxtfile names a file containing the hidden text information. This file must contain data similar to what is produced by command print-txt. When the optional argument is omitted, the program reads the hidden text information from the djvused script until reaching an end-of-file or a line containing a single period.
- output-txt
- Prints a djvused script that reconstructs the hidden text information for the selected pages. This script can later be edited and executed by invoking program djvused with option -f.
- print-ant
- Prints the annotations of the selected component file. The annotation data is represented using a simple syntax described later in this document.
- print-merged-ant
- Merge the annotations stored in the selected component files with the annotations imported from other component files such as the shared annotation component file.. The annotation data is represented using a simple syntax described later in this document.
- remove-ant
- Remove the annotation information from the selected component files. For instance, executing commands select and remove-ant removes all annotation information from the DjVu document.
- set-ant [djvusedantfile]
- Insert annotations into the selected component file. The optional argument djvusedantfile names a file containing the annotation data. This file must contain data similar to what is produced by command print-ant. When the optional argument is omitted, the program reads the annotation data from the djvused script itself until reaching an end-of-file or a line containing a single period.
- output-ant
- Print a djvused script that reconstructs the annotation information for the selected pages. This script can later be edited and executed by invoking program djvused with option -f.
- print-meta
- Print the meta-data part of the annotations for the selected component file. This command displays a subset of the information printed by command print-ant using a different syntax. Meta-data are organized as key-value pairs. Each printed line contains the key name such as author, title,etc., followed by a tab character ("\t") and a double-quoted string representing the UTF-8 encoded meta-data value.
- set-meta [djvusedmetafile]
- Set the meta-data part of the annotations of the selected component file. The remaining part of the annotations is left unchanged. The optional argument djvusedmetafile names a file containing the meta-data. This file must contain data similar to what is produced by command print-meta. When the optional argument is omitted, the program reads the annotation data from the djvused script itself until reaching an end-of-file or a line containing a single period.
- output-all
- Print a djvused script that reconstructs both the hidden text and the annotation information for the selected pages. This script can later be edited and executed by invoking program djvused with option -f.
Outline/bookmarks commands
- print-outline
- Print the outline of the document. Nothing is printed if the document contains no outline.
- set-outline [djvusedoutlinefile]
- Insert outline information into the document. The optional argument djvusedoutlinefile names a file containing the outline information. This file must contain data similar to what is produced by command print-outline. When the optional argument is omitted, the program reads the hidden text information from the djvused script until reaching an end-of-file or a line containing a single period.
Thumbnail commands
- set-thumbnails sz
- Compute thumbnails of size szxsz pixels and insert them into the document. DjVu viewers can later display these thumbnails very efficiently without need to download the data for each page. Typical thumbnail size range from 48 to 128 pixels.
- remove-thumbnails
- Remove the pre-computed thumbnails from the DjVu document. New thumbnails can then be computed using command set-thumbnails.
Save commands
The above commands only modify the memory image of the DjVu document. The following commands provide means to save the modified data into the file system.- save
- Save the modified DjVu document back into the input file djvufile specified by the arguments of the program djvused. Nothing is done if the DjVu file was not modified. Passing option -s program djvused is equivalent to executing command save before exiting the program.
- save-bundled filename
- Save the current DjVu document as a bundled multi-page DjVu document named filename. A similar capability is offered by program djvmcvt.
- save-indirect filename
- Save the current DjVu document as an indirect multi-page DjVu document. The index file of the indirect document will be named filename. All other files composing the indirect document will be saved into the same directory as the index file. A similar capability is offered by program djvmcvt.
- save-page filename
- Save the selected component file into DjVu file filename. The selected component file might import data from another component file using the so-called inclusion ( INCL ) chunks. This command then produces a file with unresolved references to imported data. Such a file should then be made part of a multi-page document containing the required data in other component files.
- save-page-with filename
- Save the selected component file into DjVu file filename. All data imported from other component files is copied into the output file as well. This command always produces a usable DjVu file. On the other hand, collecting several such files into a multi-page document might lead to useless data replication.
Miscellaneous commands
- help
- Display a help message listing all commands supported by djvused.
- dump
- Display the EA IFF 85 structure of the document or of the selected component file. A similar capability is offered by program djvudump.
- size
- Display the width and the height of the selected pages. The dimensions of each page are displayed using a syntax suitable for direct insertion into the <EMBED...></EMBED> tags.
- set-page-title title
- Sets a page title for the selected page. When page titles are available, recent versions of the DjVuLibre viewers display these page titles instead of page numbers and also accept them in page selection options. Command ls can be used to see both the page titles and page identifiers. To unset a page title, simply make it equal to the page identifier.
DJVUSED FILE FORMATS
Djvused uses a simple parenthesized syntax to represent both annotations and hidden text.
- *
- This syntax is the native syntax used by DjVu for storing annotations. Program djvused simply compresses the annotation data using the bzz(1) algorithm.
- *
- This syntax differs from the native syntax used by DjVu for storing the hidden text. Program djvused performs the translations between the compact binary representation used by DjVu and the easily modifiable parenthesized syntax.
General syntax
Djvused files are ASCII text files. The legal characters in djvused files are the printable ASCII characters and the space, tab, cr, and nl characters. Using other characters has undefined results.Djvused files are composed of a sequence of expressions separated by blank characters (space, tab, cr, or nl). There are four kind of expressions, namely integers, symbols, strings and lists.
- Integers:
- Integer numbers are represented by one or more digits, with the usual interpretation.
- Symbols:
- Symbols, or identifiers, are sequences of printable ascii characters representing a name or a keyword. Acceptable characters are the alpha-numeric characters, the underscore "_", the minus character "-", and the hash character "#". Names should not begin with a digit or a minus character.
- Strings:
- Strings denote an arbitrary sequence of bytes, usually interpreted as a sequence of UTF-8 encoded characters. Strings in djvused files are similar to strings in the C language. They are surrounded by double quote characters. Certain sequences of characters starting with a backslash ("\") have a special meaning. A backslash followed by letter "a", "b", "t", "n", "v", "f", "r", "\", and stands for the ascii character BEL(007), BS(008), HT(009), LF(010), VT(011), FF(012), CR(013), BACKSLASH(134) and DOUBLEQUOTE(042) respectively. A backslash followed by one to three digits stands for the byte whose octal code is expressed by the digits. All other backslash sequences are illegal. All non printable ascii characters must be escaped.
- Lists:
- Lists are sequence of expressions separated by blanks and surrounded by parentheses. All expressions types are acceptable within a list, including sub-lists.
Hidden text syntax
The building blocks of the hidden text syntax are lists representing each structural component of the hidden text. Structural components have the following form:- (type xmin ymin xmax ymax ... )
The symbol type must be one of page, column, region, para, line, word, or char, listed here by decreasing order of importance. The integers xmin, ymin, xmax, and ymax represent the coordinates of a rectangle indicating the position of the structural component in the page. Coordinates are measured in pixels and have their origin at the bottom left corner of the page. The remaining expressions in the list either is a single string representing the encoded text associated with this structural component, or is a sequence of structural components with a lesser type.
The hidden text for each page is simply represented by a single structural element of type page. Various level of structural information are acceptable. For instance, the page level component might only specify a page level string, or might only provide a list of lines, or might provide a full hierarchy down to the individual characters.
Outline/Bookmark syntax
The outline syntax is a single list of the form- (bookmarks ...)
The first element of the list is symbol bookmarks. The subsequent elements are lists representing the toplevel outline entries. Each outline entry is represented by a list with the following form:
- (title url ... )
The string title is the title of the outline entry. The destination string url can be an arbitrary URL or can be composed of the hash character ("#") followed by either the component file identifier or the page number corresponding to the outline entry. The remaining expressions describe subentries of this outline entry.
Annotation syntax
Annotations are represented by a sequence of annotation expressions. The following annotation expressions are recognized:- (background color)
- Specify the color of the viewer area surrounding the DjVu image. Colors are represented with the X11 hexadecimal syntax #RRGGBB. For instance, #000000 is black and #FFFFFF is white.
- (zoom zoomvalue)
- Specify the initial zoom factor of the image. Argument zoomvalue can be one of stretch, one2one, width, page, or composed of the letter d followed by a number in range 1 to 999 representing a zoom factor (such as in d300 or d150 for instance.)
- (mode modevalue)
- Specify the initial display mode of the image. Argument modevalue is one of color, bw, fore, or back.
- (align horzalign vertalign)
- Specify how the image should be aligned on the viewer surface. By default the image is located in the center. Argument horzalign can be one of left, center, or right. Argument vertalign can be one of top, center, or bottom.
- (maparea url comment area ...)
- Define an hyper-link for the specified destination.
Argument url can have one of the following forms:-
- href
(url href target)
where href is a string representing the destination and target is a string representing the target frame for the hyper-link, as defined by the HTML anchor tag <A>. The destination string href can be an arbitrary URL or can be composed of the hash character ("#") followed by either a component file identifier or a page number. Page numbers may be prefixed with an optional sign to represent a page displacement. For instance the strings #-1 and #+1 can be used to access the previous page and the next page.
Argument comment is a string that might be displayed by the viewer when the user moves the mouse over the hyper-link.
Argument area defines the shape and the location of the hyperlink. The following forms are recognized:
- (rect xmin ymin width height)
(oval xmin ymin width height)
(poly x0 y0 x1 y1 ... )
(text xmin ymin width height)
(line x0 y0 x1 y1)
All parameters are numbers representing coordinates. Coordinates are measured in pixels and have their origin at the bottom left corner of the page.
The remaining expressions in the maparea list represent the visual effect associated with the hyper-link.
A first set of options defines how borders are drawn for rect, oval, polygon, or text hyperlink areas.
- (none)
(xor)
(border color)
(shadow_in [thickness])
(shadow_out [thickness])
(shadow_ein [thickness])
(shadow_eout [thickness])
where parameter color has syntax #RRGGBB as described above, and parameter thickness is an integer in range 1 to 32. The last four border options are only supported for rect hyperlink areas. The default border is a simple black line. Border options do not apply to line areas.
When a border option is specified, the border becomes visible when the user moves the mouse over the hyperlink. The border may be made always visible by using the following option:
- (border_avis)
The following two options may be used with rect hyperlink areas. The complete area will be highlighted using the specified color at the specified opacity (0-100, default 50).
- (hilite color)
(opacity op)
This is often used with an empty URL for simply emphasizing a specific segment of an image.
The following three options may be used with line areas to specify an optional ending arrow, the line width and color. The default is a black line with width 1 and without arrow.
- (arrow)
(width w)
(lineclr color)
Finally the following three options can be used with text areas. The default background color is transparent. The default text color is black. The pushpin option indicates that the text is symbolized by a small pushpin icon. Clicking the icon reveals the text.
- (backclr bkcolor)
(textclr txtcolor)
(pushpin)
- href
- (metadata ... (key value) ... )
- Define meta-data entries. Each entry is identified by a symbol key representing the nature of the meta data entry. The string value represents the value associated with the corresponding key. Two sets of keys are noteworthy: keys borrowed from the BibTex bibliography system, and keys borrowed from the PDF DocInfo metadata. BibTex keys are always expressed in lowercase, such as year, booktitle, editor, author, etc.. DocInfo keys start with an uppercase letter, such as Title, Author, Subject, Creator, Produced, Trapped, CreationDate, and ModDate. The values associated with the last two keys should be dates expressed according to RFC 3339.
LIMITATIONS
The current version of program djvused only supports selecting one component file or all component files. There is no way to select only a few component files.CREDITS
This program was initially written by L'eon Bottou <leonb@users.sourceforge.net> and was improved by Yann Le Cun <profshadoko@users.sourceforge.net>, Florin Nicsa, Bill Riemers <docbill@sourceforge.net> and many others.SEE ALSO
djvu(1), djvutxt(1), djvmcvt(1), djvudump(1), bzz(1)Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre