Rechercher une page de manuel
git-commit
Langue: en
Version: 02/25/2008 (mandriva - 01/05/08)
Section: 1 (Commandes utilisateur)
Sommaire
NAME
git-commit - Record changes to the repositorySYNOPSIS
-
git-commit [-a | --interactive] [-s] [-v] [-u] [(-c | -C) <commit> | -F <file> | -m <msg> | --amend] [--allow-empty] [--no-verify] [-e] [--author <author>] [--cleanup=<mode>] [--] [[-i | -o ]<file>...]
DESCRIPTION
Use git commit to store the current contents of the index in a new commit along with a log message describing the changes you have made.The content to be added can be specified in several ways:
- 1.by using git-add(1) to incrementally "add" changes to the index before using the commit command (Note: even modified files must be "added");
- 2.by using git-rm(1) to remove files from the working tree and the index, again before using the commit command;
- 3.by listing files as arguments to the commit command, in which case the commit will ignore changes staged in the index, and instead record the current content of the listed files;
- 4.by using the -a switch with the commit command to automatically "add" changes from all known files (i.e. all files that are already listed in the index) and to automatically "rm" files in the index that have been removed from the working tree, and then perform the actual commit;
- 5.by using the --interactive switch with the commit command to decide one by one which files should be part of the commit, before finalizing the operation. Currently, this is done by invoking git-add --interactive.
If you make a commit and then found a mistake immediately after that, you can recover from it with git-reset(1).
OPTIONS
-a|--all
- Tell the command to automatically stage files that have been modified and deleted, but new files you have not told git about are not affected.
-c or -C <commit>
- Take existing commit object, and reuse the log message and the authorship information (including the timestamp) when creating the commit. With -C, the editor is not invoked; with -c the user can further edit the commit message.
-F <file>
- Take the commit message from the given file. Use - to read the message from the standard input.
--author <author>
- Override the author name used in the commit. Use A U Thor <author@example.com> format.
-m <msg>|--message=<msg>
- Use the given <msg> as the commit message.
-t <file>|--template=<file>
- Use the contents of the given file as the initial version of the commit message. The editor is invoked and you can make subsequent changes. If a message is specified using the -m or -F options, this option has no effect. This overrides the commit.template configuration variable.
-s|--signoff
- Add Signed-off-by line at the end of the commit message.
--no-verify
- This option bypasses the pre-commit and commit-msg hooks. See also hooks[1].
--allow-empty
- Usually recording a commit that has the exact same tree as its sole parent commit is a mistake, and the command prevents you from making such a commit. This option bypasses the safety, and is primarily for use by foreign scm interface scripts.
--cleanup=<mode>
- This option sets how the commit message is cleaned up. The <mode> can be one of verbatim, whitespace, strip, and default. The default mode will strip leading and trailing empty lines and #commentary from the commit message only if the message is to be edited. Otherwise only whitespace removed. The verbatim mode does not change message at all, whitespace removes just leading/trailing whitespace lines and strip removes both whitespace and commentary.
-e|--edit
- The message taken from file with -F, command line with -m, and from file with -C are usually used as the commit log message unmodified. This option lets you further edit the message taken from these sources.
--amend
- Used to amend the tip of the current branch. Prepare the tree object you would want to replace the latest commit as usual (this includes the usual -i/-o and explicit paths), and the commit log editor is seeded with the commit message from the tip of the current branch. The commit you create replaces the current tip --- if it was a merge, it will have the parents of the current tip as parents --- so the current top commit is discarded.
It is a rough equivalent for:
-
-
.ft C $ git reset --soft HEAD^ $ ... do something else to come up with the right tree ... $ git commit -c ORIG_HEAD .ft
-
-i|--include
- Before making a commit out of staged contents so far, stage the contents of paths given on the command line as well. This is usually not what you want unless you are concluding a conflicted merge.
-u|--untracked-files
- Show all untracked files, also those in uninteresting directories, in the "Untracked files:" section of commit message template. Without this option only its name and a trailing slash are displayed for each untracked directory.
-v|--verbose
- Show unified diff between the HEAD commit and what would be committed at the bottom of the commit message template. Note that this diff output doesn't have its lines prefixed with #.
-q|--quiet
- Suppress commit summary message.
--
- Do not interpret any more arguments as options.
<file>...
- When files are given on the command line, the command commits the contents of the named files, without recording the changes already staged. The contents of these files are also staged for the next commit on top of what have been staged before.
EXAMPLES
When recording your own work, the contents of modified files in your working tree are temporarily stored to a staging area called the "index" with git-add(1). A file can be reverted back, only in the index but not in the working tree, to that of the last commit with git-reset HEAD --- <file>, which effectively reverts git-add and prevents the changes to this file from participating in the next commit. After building the state to be committed incrementally with these commands, git commit (without any pathname parameter) is used to record what has been staged so far. This is the most basic form of the command. An example:-
.ft C $ edit hello.c $ git rm goodbye.c $ git add hello.c $ git commit .ft
-
.ft C $ edit hello.c $ rm goodbye.c $ git commit -a .ft
After staging changes to many files, you can alter the order the changes are recorded in, by giving pathnames to git commit. When pathnames are given, the command makes a commit that only records the changes made to the named paths:
-
.ft C $ edit hello.c hello.h $ git add hello.c hello.h $ edit Makefile $ git commit Makefile .ft
-
.ft C $ git commit .ft
After a merge (initiated by either git-merge(1) or git-pull(1)) stops because of conflicts, cleanly merged paths are already staged to be committed for you, and paths that conflicted are left in unmerged state. You would have to first check which paths are conflicting with git-status(1) and after fixing them manually in your working tree, you would stage the result as usual with git-add(1):
-
.ft C $ git status | grep unmerged unmerged: hello.c $ edit hello.c $ git add hello.c .ft
-
.ft C $ git commit .ft
DISCUSSION
Though not required, it's a good idea to begin the commit message with a single short (less than 50 character) line summarizing the change, followed by a blank line and then a more thorough description. Tools that turn commits into email, for example, use the first line on the Subject: line and the rest of the commit in the body.At the core level, git is character encoding agnostic.
- •The pathnames recorded in the index and in the tree objects are treated as uninterpreted sequences of non-NUL bytes. What readdir(2) returns are what are recorded and compared with the data git keeps track of, which in turn are expected to be what lstat(2) and creat(2) accepts. There is no such thing as pathname encoding translation.
- •The contents of the blob objects are uninterpreted sequence of bytes. There is no encoding translation at the core level.
- •The commit log messages are uninterpreted sequence of non-NUL bytes.
- 1.git-commit-tree (hence, git-commit which uses it) issues a warning if the commit log message given to it does not look like a valid UTF-8 string, unless you explicitly say your project uses a legacy encoding. The way to say this is to have i18n.commitencoding in .git/config file, like this:
-
-
.ft C [i18n] commitencoding = ISO-8859-1 .ft
-
- 2.git-log, git-show and friends looks at the encoding header of a commit object, and tries to re-code the log message into UTF-8 unless otherwise specified. You can specify the desired output encoding with i18n.logoutputencoding in .git/config file, like this:
-
-
.ft C [i18n] logoutputencoding = ISO-8859-1 .ft
-
ENVIRONMENT AND CONFIGURATION VARIABLES
The editor used to edit the commit log message will be chosen from the GIT_EDITOR environment variable, the core.editor configuration variable, the VISUAL environment variable, or the EDITOR environment variable (in that order).HOOKS
This command can run commit-msg, pre-commit, and post-commit hooks. See hooks[1] for more information.SEE ALSO
git-add(1), git-rm(1), git-mv(1), git-merge(1), git-commit-tree(1)AUTHOR
Written by Linus Torvalds <torvalds@osdl.org> and Junio C Hamano <junkio@cox.net>GIT
Part of the git(7) suiteNOTES
- 1.
- hooks
- hooks.html
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre