Rechercher une page de manuel
irsend
Langue: en
Version: August 2010 (ubuntu - 24/10/10)
Section: 1 (Commandes utilisateur)
NAME
irsend - basic LIRC program to send infra-red commandsSYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such as TV boxes, HiFi sets, etc.DIRECTIVE can be:
- SEND_ONCE - send CODE [CODE ...] once SEND_START - start repeating CODE SEND_STOP - stop repeating CODE LIST - list configured remote items SET_TRANSMITTERS - set transmitters NUM [NUM ...] SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
- LIST "" "" - list all configured remote names LIST REMOTE "" - list all codes of REMOTE LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
- -h --help
- display usage summary
- -v --version
- display version
- -d --device
- use given lircd socket [/var/run/lirc/lircd]
- -a --address=host[:port]
- connect to lircd at this address
- -# --count=n
- send command n times
EXAMPLES
- irsend LIST DenonTuner "" irsend SEND_ONCE DenonTuner PROG-SCAN irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3 irsend SEND_STOP OnkyoAmpli VOL-DOWN irsend SET_TRANSMITTERS 1 irsend SET_TRANSMITTERS 1 3 4 irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
- /etc/lirc/lircd.conf
- Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and waveform details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:"irsend: could not connect to socket" "irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre