launchtool

Langue: en

Version: october 03, 2002 (debian - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

launchtool - run a command supervising its execution.

SYNOPSIS

launchtool [options] [command]

DESCRIPTION

launchtool is a tool that runs a user-supplied command and can supervise its execution in many ways, such as controlling its environment, blocking signals, logging its output, changing user and group permissions, limiting resource usage, restarting it if it fails, running it continuously and turning it into a daemon.

launchtool is fully configurable, both through the commandline and using configuration files. Configuration files can be made executable and start with ``#!/usr/bin/launchtool -C'', to create daemons using simpler commands.

INVOCATION

launchtool executes the command it finds in the commandline, via switches or the configuration file. All non-switch parameters are concatenated to the command, that will be executed using ``/bin/sh -c''.

launchtool default mode of execution is to run the command normally and return its exit status. All features are disabled by default and activated using commandline options or values in the configuration file. Commandline options override configuration files.

launchtool sessions are identified by a tag that is used both to mark the command output in logfiles and to identify running sessions to check if they have already been started or send them a signal without specifying the process PID.

OPTIONS

launchtool follows the usual GNU command line syntax, with long options starting with two dashes (`-').
-?, --help
Display a detailed help message with a summary of all options.
--usage
Display a brief usage message.
-k, --kill[=signal]
Kill a running launchtool with the specified signal (15 by default) and exit. No signal name parsing is (yet) provided, so the signal must be specified by its number.
--check
Check if another launchtool is running, then exit.
--showcfg
Process config files and commandline, show the resulting configuration and exit.
-V, --version
Print version and exit.
-t, --tag=tag, ``tag''
Tag used to identify the session
-C, --config=file
Read configuration data from ``file''. Defaults to /etc/launchtool/<tag>.conf
-v, --verbose, ``verbose''
Enable verbose output.
--no-verbose
Disable verbose output.
--debug, ``debug''
Enable debug output (includes --verbose output).
--no-debug
Disable debug output.
-c, --command=cmd, ``command''
Command to execute.
--visible-tag=tag, ``visible tag''
Tag to use for pidfiles and logfiles instead of ``launchtool-<tag>''.
-d, --daemon, ``daemon''
Fork to background and detach from terminal, becoming a daemon.
-n, --no-daemon
Don't become a daemon.
--pidfile, ``pidfile''
Create a pidfile (default when --daemon is used).
--no-pidfile
Don't create a pidfile (default when --daemon is not used).
--piddir=dir, ``piddir''
Directory where pidfiles are stored (default to /var/run).
--chroot=dir, ``root dir''
Chroot to this directory before running the command.
--chdir=dir, ``start dir''
Chdir to this directory before running the command (default to '.' or '/' if --daemon is present).
-u, --user=user, ``user''
User privileges to run the command with.
-g, --group=group, ``group''
Group privileges to run the command with.
--umask=mask, ``umask''
Set this umask before running the command.
-L, --infinite-runs, ``infinite runs''
Never give up restarting the command if it fails.
--no-infinite-runs
Give up restarting the command after a certain number of failures.
--wait-times=t1,t2,... , ``wait times''
List of times (in seconds) to wait after a program failure before restarting it. If not specified, failed commands will not be restarted.
--good-running-time=seconds, ``good running time''
Minimum running time needed to restart for the first wait time.
--forwarded-signals=sig1,sig2,... , ``forwarded signals''
List of signals (in name or in number) to be forwarded to the command.
--blocked-signals=sig1,sig2,... , ``blocked signals''
List of signals (in name or in number) to be blocked before running the command.
--limit-cpu=seconds, ``cpu limit''
CPU time limit for the command (see setrlimit(2)).
--limit-file-size=1024b-blocks, ``file size limit''
File size limit for the command (see setrlimit(2)).
--limit-data-memory=1024b-blocks, ``data memory limit''
Data memory size limit for the command (see setrlimit(2)).
--limit-process-count=count, ``process count limit''
Process count limit for the command (see setrlimit(2)).
--limit-open-files=count, ``open files limit''
Open files limit for the command (see setrlimit(2)).
--limit-core-size=1024b-blocks, ``core size limit''
Core file size limit for the command (see setrlimit(2)).
--restrict-environment, ``restrict environment''
Restrict the child environment.
--no-restrict-environment
Copy all environment variables to the child environment.
--allowed-env-vars=var1,var2,... , ``allowed env vars''
List of environment variables to be copied to the child when the environment is restricted.
--log-launchtool-output=target, ``launchtool output''
Target of the launchtool output (ignore, stdout, stderr, file:filename or syslog:identity,facility,level).
--log-launchtool-errors=target, ``launchtool errors''
Target of the launchtool error messages (ignore, stdout, stderr, file:filename or syslog:identity,facility,level).
--log-child-output=target, ``command output''
Target of the child output (ignore, stdout, stderr, file:filename or syslog:identity,facility,level).
--log-child-errors=target, ``command errors''
Target of the child error messages (ignore, stdout, stderr, file:filename or syslog:identity,facility,level).
--silent-restart-status=value, ``silent restart status''
Return value used by the child to explicitly request a restart (feature disabled if not specified).
--silent-restart-time=seconds, ``silent restart time''
Time to wait before restarting the child after an explicit restart request.
--stats, ``stats''
Produce some statistics when the command terminates (implied by --verbose).
--no-stats
Do not produce statistics when the command terminates.

LOGGING TARGETS

Logging targets are specified with a target name and its optional parameters, separated by a colon (``:'').

Possible target configurations are:

ignore
Output is just discarded.
stdout
Output goes to the standard output stream.
stderr
Output goes to the standard error stream.
file:filename
Output goes to the file ``filename''.
syslog:identity,facility,level
Output goes to syslog, with the given identity (a string identifying the logger), facility (see syslog(3)) and level (see syslog(3)).

CONFIGURATION FILE

The configuration file is a sequence of ``key = value'' lines. Empty lines and lines starting with '#' are ignored.

The possible keys have been listed in the OPTIONS section next to the corresponding commandline switch.

Boolean (yes/no) values can take the values ``yes'', ``no'', ``true'', ``false'', ``0'' and ``1''.

EXAMPLES

 # Running a command normally
 
 launchtool -t tag 'echo "Hello, world!"'
 
 
 # Run a command restarting it if it fails:
 
 launchtool -t tag --wait-times=1,1,1,3,3,3,10,10,10 'my_wonderful_server'
 
 
 # Run a command, with restrictions, restarting it if it fails, as a daemon
 
 launchtool -t myserver -d --user=myserver       --chroot=/var/myserver \
         --limit-process-count=5 --limit-open-files=10 \
         --wait-times=1,1,1,3,3,3,10,10,10 \
         --infinite-runs --stats \
         --log-launchtool-output=syslog:myserver,LOG_DAEMON,LOG_INFO \
         --log-launchtool-errors=syslog:myserver,LOG_DAEMON,LOG_ERR \
         --log-child-output=syslog:myserver,LOG_DAEMON,LOG_INFO \
         --log-child-errors=syslog:myserver,LOG_DAEMON,LOG_ERR \
         'my_experimental_server'
 
 # Same thing, using a configuration file
 
 tag = myserver
 command = my_wonderful_server
 daemon = yes
 stats = yes
 user = myserver
 root dir = /var/myserver
 process count limit = 5
 open files limit = 10
 wait times = 1,1,1,3,3,3,10,10,10
 infinite runs = yes
 launchtool output = syslog:myserver,LOG_DAEMON,LOG_INFO
 launchtool errors = syslog:myserver,LOG_DAEMON,LOG_ERR
 command output = syslog:myserver,LOG_DAEMON,LOG_INFO
 command errors = syslog:myserver,LOG_DAEMON,LOG_ERR
 
 # Transform a shell command in a polling daemon
 # Make the file /tmp/have_mobile exist only if my cell phone is present in the
 # IRDA discovery list
 
 launchtool -t celldetect -d --silent-restart-time=5 --silent-restart-status=0 --user=nobody \
         "if grep -q SIEMENS /proc/sys/net/irda/discovery; then touch /tmp/have_mobile; else rm -f /tmp/have_mobile; fi ; exit 0"
 
 # Ceck if the celldetect daemon is running
 
 launchtool -t celldetect --check
 
 # Kill the celldetect daemon launched with the command above
 
 launchtool -t celldetect -k
 
 
 # Same polling daemon, with an executable configuration file
 
 #!/usr/bin/launchtool -C
 tag = celldetect
 command = if grep -q SIEMENS /proc/sys/net/irda/discovery; then touch /tmp/have_mobile; else rm -f /tmp/have_mobile; fi ; exit 0
 daemon = yes
 user = nobody
 silent restart time = 5
 silent restart status = 0
 
 # Ceck if the celldetect daemon is running, using the executable configuration
 # file
 
 celldetect --check
 
 # Kill the celldetect daemon using the executable configuration file
 
 celldetect -k
 

SEE ALSO

syslog(3), setrlimit(2).

AUTHOR

launchtool has been written by Enrico Zini <enrico@debian.org>.