lskrf

Langue: en

Version: 2010-06-30 (fedora - 01/12/10)

Section: 1 (Commandes utilisateur)

NAME

lskrf - List the keyrecs in a DNSSEC-Tools keyrec file

SYNOPSIS

   lskrf [options] <keyrec-files>
 
 

DESCRIPTION

lskrf lists the contents of the specified keyrec files. All keyrec files are loaded before the output is displayed. If any keyrecs have duplicated names, whether within one file or across multiple files, the later keyrec will be the one whose data are displayed.

lskrf has three base output formats. In ascending levels of detail, these formats are terse output, default format, and long format. Terse output is given when the -terse option is specified; long output is given when the -long option is specified.

The output displayed for each record in a keyrec file depends on the selected records, the selected attributes, and the selected output format. Each option in these option groups is described in detail in the OPTIONS section; the three basic output formats are described in the OUTPUT FORMATS section.

OUTPUT FORMATS

keyrec files hold three types of keyrec records: zone records, signing set records, and key records. Each type of keyrec record contains keyrec fields related to that type. For example, zone keyrec records contain data about all the keys associated with a particular zone; key keyrec records contain key lengths and algorithms for each particular key. The data to be printed must be specified by selecting some combination of the -zone, -sets, -keys, and -all options. There are also options for specifying specific types of keys to be printed.

The three base output formats are the default format, the terse format, and the long format. The -terse option indicates that a minimal amount of output is desired; the -long option indicates that a great deal of output is desired. The record-selection and attribute-selection options may be used in conjunction with -terse to display exactly the set of keyrec fields needed. The default output format is a middle ground between terse and long output and is that used when neither -terse nor -long is given.

Zone keyrec Output

The table below shows the zone keyrec fields displayed for each output format.
     keyrec field         default        terse        long
     ------------         -------        -----        ----
     keyrec type            yes           no          yes
     zone name              yes           yes         yes
     zone file              yes           no          yes
     signed zonefile        yes           no          yes
     signing date           yes           no          yes
     expiration date        no            no          yes
     archive directory      no            no          yes
     KSK count              no            no          yes
     KSK directory          no            no          yes
     current KSK set        no            no          yes
     published KSK set      no            no          yes
     ZSK count              no            no          yes
     ZSK directory          no            no          yes
     current ZSK set        no            no          yes
     published ZSK set      no            no          yes
     new ZSK set            no            no          yes
 
 

Set keyrec Output

The table below shows the signing set keyrec fields displayed for each output format.
     keyrec field                 default        terse        long
     ------------                 -------        -----        ----
     keyrec type                    yes           no          yes
     set name                       yes           yes         yes
     zone name                      yes           no          yes
     type                           yes           no          yes
     keys                           no            no          yes
     last modification date         no            no          yes
 
 

Key keyrec Output

The table below shows the key keyrec fields displayed for each output format.
     keyrec field               default       terse       long
     ------------               -------       -----       ----
     keyrec type                yes           no          yes
     key name                   yes           yes         yes
     algorithm                  no            no          yes
     end date                   no            no          yes
     generation date            yes           no          yes
     key length                 no            no          yes
     key life                   no            no          yes
     key path                   no            no          yes
     keys                       no            no          yes
     random number generator    no            no          yes
     zone name                  yes           no          yes
 
 

OPTIONS

lskrf takes three types of options: record-selection options, record-attribute options, and output-style options. These option sets are detailed below.

Record-selection options are required options; at least one record-selection option must be selected. Record-attribute options and output-style options are optional options; any number of these option may be selected.

Record-Selection Options

These options select the types of keyrec that will be displayed.
-all
This option displays all the records in a keyrec file.
-zones
This option displays the zones in a keyrec file.
-sets
This option displays the signing sets in a keyrec file.
-keys
This option displays the keys in a keyrec file.

The key data are sorted by key type in the following order: Current KSKs, Published KSKs, Current ZSKs, Published ZSKs, New ZSKs, Obsolete KSKs, and Obsolete ZSKs.

-ksk
This option displays the KSK keys in a keyrec file.
-kcur
This option displays the Current KSK keys in a keyrec file.
-kpub
This option displays the Published KSK keys in a keyrec file.
-kobs
This option displays the obsolete KSK keys in a keyrec file. This option must be give if obsolete KSK keys are to be displayed.
-krev
This option displays the revoked KSK keys in a keyrec file. This option must be give if revoked KSK keys are to be displayed.
-zsk
This option displays the ZSK keys in a keyrec file. It does not include obsolete ZSK keys; the -obs option must be specified to display obsolete keys.
-cur
This option displays the Current ZSK keys in a keyrec file.
-new
This option displays the New ZSK keys in a keyrec file.
-pub
This option displays the Published ZSK keys in a keyrec file.
-zobs
This option displays the obsolete ZSK keys in a keyrec file. This option must be give if obsolete ZSK keys are to be displayed.
-zrev
This option displays the revoked ZSK keys in a keyrec file. This option must be give if revoked ZSK keys are to be displayed.
-obs
This option displays the obsolete KSK and ZSK keys in a keyrec file. This option is a shorthand method specifying the -kobs and -zobs options.
-rev
This option displays the revoked KSK and ZSK keys in a keyrec file. This option is a shorthand method specifying the -krev and -zrev options.
-invalid
This option displays the obsolete and revoked KSK and ZSK keys in a keyrec file. This option is a shorthand method specifying the -obs and -rev options.

Record-Attribute Options

These options select subsets of the keyrecs chosen by the record-selection options.
-valid
This option displays the valid zones in a keyrec file. It implies the -zones option.
-expired>
This option displays the expired zones in a keyrec file. It implies the -zones option.
-ref
This option displays the referenced signing set keyrecs and the referenced key keyrecs in a keyrec file, depending upon other selected options.

Referenced state depends on the following:

   * Signing sets are considered to be referenced if they
     are listed in a zone keyrec.
 
   * KSKs are considered to be referenced if they are listed
     in a signing set keyrec that is listed in a zone keyrec.
 
   * ZSKs are considered to be referenced if they are listed
     in a signing set keyrec that is listed in a zone keyrec.
 
 

This option may be used with either the -sets or -keys options. If it isn't used with any record-selection options, then it is assumed that both -sets and -keys have been specified.

-unref
This option displays the unreferenced signing set keyrecs or the unreferenced key keyrecs in a keyrec file, depending upon other selected options.

Unreferenced state depends on the following:

   * Signing sets are considered to be unreferenced if they
     are not listed in a zone keyrec.
 
   * KSKs are considered to be unreferenced if they are not listed
     in a signing set keyrec that is listed in a zone keyrec.
 
   * ZSKs are considered to be unreferenced if they are not listed
     in a signing set keyrec that is listed in a zone keyrec.
 
   * Obsolete ZSKs are checked, whether or not the -obs flag
     was specified.
 
 

This option may be used with either the -sets or -keys options. If it isn't used with any record-selection options, then it is assumed that both -sets and -keys have been specified.

Zone-Attribute Options

These options allow specific zone fields to be included in the output. If combined with the -terse option, only those fields specifically desired will be printed. These options must be used with the -zone option.
-z-archdir
Display the zone's archive directory. If an archive directory is not explicitly set for the zone, the default directory will be listed.
-z-dates
Display the zone's time-stamps. These are the signing date and the expiration date.
-z-dirs
Display the zone's directories. These directories are the KSK directory, the ZSK directory, and the key archive directory.
-z-expdate
Display the zone's expiration date.
-z-ksk
Display the zone's KSK data. This is the equivalent of specifying the -z-kskcount, -z-kskcur, -z-kskdir, and -z-kskpub options.
-z-kskcount
Display the zone's KSK count.
-z-kskcur
Display the zone's Current KSK signing set. If this is not defined, then ``<unset>'' will be given.
-z-kskdir
Display the zone's KSK directory. If this is not defined, then ``.'' will be given.
-z-kskpub
Display the zone's Published KSK signing set. If this is not defined, then ``<unset>'' will be given.
-z-sets
Display the zone's signing sets. This is the equivalent of specifying the -z-kskcur, -z-kskpub, -z-zskcur, -z-zsknew, and -z-zskpub options.
-z-signdate
Display the zone's signing date.
-z-signfile
Display the zone's signed zonefile.
-z-zonefile
Display the zone's zonefile.
-z-zsk
Display the zone's ZSK data. This is the equivalent of specifying the -z-zskcount, -z-zskcur, -z-zskdir, -z-zsknew, and -z-zskpub options.
-z-zskcount
Display the zone's ZSK count.
-z-zskcur
Display the zone's Current ZSK signing set. If this is not defined, then ``<unset>'' will be given.
-z-zskdir
Display the zone's ZSK directory. If this is not defined, then ``.'' will be given.
-z-zsknew
Display the zone's New ZSK signing set. If this is not defined, then ``<unset>'' will be given.
-z-zskpub
Display the zone's Published ZSK signing set. If this is not defined, then ``<unset>'' will be given.

Set-Attribute Options

These options allow specific set fields to be included in the output. If combined with the -terse option, only those fields specifically desired will be printed. These options must be used with the -sets option.

If RFC5011 processing is enabled, there is special handling of the zone's set keyrec of revoked KSK keys. The ``kskrev'' field in the zone's keyrec points to a set keyrec, marked as being of type ``kskrev''. This set keyrec, in turn, points to a number of other set keyrecs, all of which are also marked as being of type ``kskrev''. The group of all revoked KSK keys is found by consulting that subsidiary set of ``kskrev'' set keyrecs. When the ages of these revoked keys exceeds their revocation periods, they are marked as being obsolete (``kskobs''). If this happens as part of normal rollover, these revoked key and set keyrecs are all removed from the chain of active, revoked keyrecs. If this happens to a key that's part of a larger set of keys, it is removed from that signing set and put in its own new signing set. lskrf displays the type of the ``kskrev'' set (listed in the zone keyrec) as ``KSK-REV'', and all other revoked KSK keyrecs are listed as ``KSK-rev''.

-s-keys
Display the set's keys.
-s-lastmod
Display the set's date of last modification.
-s-type
Display the set's type.
-s-zone
Display the set's zone name.
-s-ksk
Display KSK signing sets. This option implies the -sets option.
-s-kcur
Display current KSK signing sets. This option implies the -sets option.
-s-kobs
Display obsolete KSK signing sets. This option implies the -sets option.
-s-kpub
Display published KSK signing sets. This option implies the -sets option.
-s-krev
Display revoked KSK signing sets. This option implies the -sets option.
-s-zsk
Display ZSK signing sets. This option implies the -sets option.
-s-zcur
Display current ZSK signing sets. This option implies the -sets option.
-s-znew
Display new ZSK signing sets. This option implies the -sets option.
-s-zobs
Display obsolete ZSK signing sets. This option implies the -sets option.
-s-zpub
Display published ZSK signing sets. This option implies the -sets option.
-s-zrev
Display revoked ZSK signing sets. This option implies the -sets option.

Key-Attribute Options

These options allow specific key fields to be included in the output. If combined with the -terse option, only those fields specifically desired will be printed. These options must be used with the -key option.
-k-algorithm
Display the key's encryption algorithm.
-k-enddate
Display the key's end-date, calculated by adding the key's lifespan to its signing date.
-k-length
Display the key's length.
-k-lifespan
Display the key's lifespan (in seconds.) This lifespan is only related to the time between key rollover. There is no other lifespan associated with a key.
-k-path
Display the key's path.
-k-random
Display the key's random number generator.
-k-signdate
Display the key's signing date.
-k-zone
Display the key's zonefile.

Output-Format Options

These options define how the keyrec information will be displayed.

Without any of these options, the zone name, zone file, zone-signing date, and a label will be displayed for zones. For types, the key name, the key's zone, the key's generation date, and a label will be displayed if these options aren't given.

-count
The count of matching records will be displayed, but the matching records will not be.
-nodate
The key's generation date will not be printed if this flag is given.
-headers
Display explanatory column headers. If this flag is given, then entry labels will not be printed unless explicitly requested by use of the -label option.
-label
A label for the keyrec's type will be given.
-long
The long form of output will be given. See the OUTPUT FORMATS section for details on data printed for each type of keyrec record.

Long zone output can get very wide, depending on the data.

-terse
This options displays only the name of the zones or keys selected by other options.
-Version
Displays the version information for lskrf and the DNSSEC-Tools package.
-help
Display a usage message and exit.
-h-zones
Display the zone-attribute options and exit.
-h-sets
Display the set-attribute options and exit.
-h-keys
Display the key-attribute options and exit.
Copyright 2005-2010 SPARTA, Inc. All rights reserved. See the COPYING file included with the DNSSEC-Tools package for details.

AUTHOR

Wayne Morrison, tewok@users.sourceforge.net

SEE ALSO

zonesigner(8)

Net::DNS::SEC::Tools::keyrec.pm(3)

file-keyrec(5)