Rechercher une page de manuel
matroxset
Langue: en
Version: 254254 (debian - 07/07/09)
Section: 1 (Commandes utilisateur)
NAME
matroxset - switch the output mode of Matrox video cardsSYNOPYSIS
matroxset [OPTION]... [VALUE]DESCRIPTION
If VALUE is specified, set the specified option to VALUE. If VALUE is not specified, retreive the value of the specified option.- -f DEVICE
- manipulate the frame buffer DEVICE (default is /dev/fb1)
- -o OUTPUT
- set OUTPUT (0 is primary, 1 is secondary, default is 1) to the output mode VALUE (128 is monitor, 1 is PAL TV, 2 is NTSC TV).
- -m
- connect this frame buffer to the outputs specified in VALUE (0 is none, 1 is primary, 2 is secondary, 4 is digital flat panel; these values may be summed for multiple outputs).
- -p
- display information about blanking
- -l
- list controls
- -c
- get/set control value
- -e
- edit controls interactively
AUTHOR
Written by Petr Vandrovec.This manual page was written by Shaun Jackman <sjackman@debian.org> for the Debian system.
REPORTING BUGS
Report bugs to Petr Vandrovec <vandrove@vc.cvut.cz>.COPYRIGHT
Copyright 2004 Petr VandrovecSEE ALSO
- TV-out on the G450
- http://www.bglug.ca/matrox_tvout/
- Matrox frame buffer header
- /usr/include/linux/matroxfb.h
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre