mrtg-mibhelp

Langue: en

Version: 2010-01-20 (ubuntu - 24/10/10)

Section: 1 (Commandes utilisateur)

NAME

mrtg-mibhelp - A Table of some interesting OIDs

OVERVIEW

This File Contains a collection of interesting MIB Entries ... mrtg knows about their names ... depending on the ASN.1 Syntax you may have to put gauge into the Options[]: parameter.

For information about how to create a Target[]: parameter which references these MIB entries, please consult mrtg-reference.

MIB LIST

ifOperStatus

  Descriptor:            ifOperStatus
  Identifier:            1.3.6.1.2.1.2.2.1.8
  ASN.1 Syntax:          INTEGER
  Enumeration:           up 1, down 2, testing 3
 
 

The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.

ifAdminStatus

  Descriptor:            ifAdminStatus
  Identifier:            1.3.6.1.2.1.2.2.1.7
  ASN.1 Syntax:          INTEGER
  Enumeration:           up 1, down 2, testing 3
 
 

The current administrative state of the interface. The testing(3) state indicates that no operational packets can be passed.

ifInOctets

  Descriptor:            ifInOctets
  Identifier:            1.3.6.1.2.1.2.2.1.10
  ASN.1 Syntax:          Counter32
 
 

The total number of octets received on the interface, including framing characters.

ifInUcastPkts

  Descriptor:            ifInUcastPkts
  Identifier:            1.3.6.1.2.1.2.2.1.11
  ASN.1 Syntax:          Counter32
 
 

The number of subnetwork-unicast packets delivered to a higher-layer protocol.

ifInNUcastPkts

  Descriptor:            ifInNUcastPkts
  Identifier:            1.3.6.1.2.1.2.2.1.12
  ASN.1 Syntax:          Counter32
 
 

The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.

ifInDiscards

  Descriptor:            ifInDiscards
  Identifier:            1.3.6.1.2.1.2.2.1.13
  ASN.1 Syntax:          Counter32
 
 

The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.

ifInErrors

  Descriptor:            ifInErrors
  Identifier:            1.3.6.1.2.1.2.2.1.14
  ASN.1 Syntax:          Counter32
 
 

The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.

ifInUnknownProtos

  Descriptor:            ifInUnknownProtos
  Identifier:            1.3.6.1.2.1.2.2.1.15
  ASN.1 Syntax:          Counter32
 
 

The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

ifOutOctets

  Descriptor:            ifOutOctets
  Identifier:            1.3.6.1.2.1.2.2.1.16
  ASN.1 Syntax:          Counter32
 
 

The total number of octets transmitted out of the interface, including framing characters.

ifOutUcastPkts

  Descriptor:            ifOutUcastPkts
  Identifier:            1.3.6.1.2.1.2.2.1.17
  ASN.1 Syntax:          Counter32
 
 

The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.

ifOutNUcastPkts

  Descriptor:             ifOutNUcastPkts
  Identifier:            1.3.6.1.2.1.2.2.1.18
  ASN.1 Syntax:          Counter32
 
 

The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.

ifOutDiscards

  Descriptor:             ifOutDiscards
  Identifier:            1.3.6.1.2.1.2.2.1.19
  ASN.1 Syntax:          Counter32
 
 

The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

ifOutErrors

  Descriptor:             ifOutErrors
  Identifier:            1.3.6.1.2.1.2.2.1.20
  ASN.1 Syntax:          Counter32
 
 

The number of outbound packets that could not be transmitted because of errors.

ifOutQLen

  Descriptor:             ifOutQLen
  Identifier:            1.3.6.1.2.1.2.2.1.21
  ASN.1 Syntax:          Unsigned32
 
 

The length of the output packet queue (in packets).

frInOctets

From: Simon Ferrett <simonf@world.net>
  'frInOctets' => '1.3.6.1.2.1.10.32.2.1.9'
  'frOutOctets' => '1.3.6.1.2.1.10.32.2.1.7'
 
 

which when used in the form:

  frInOctets.pp.dd&frOutOctets.pp.dd:community@cisco.router
 
 

where pp is the physical port that the frame relay pvc is defined on and dd is the DLCI of the pvc gets you the in and out octets for just that pvc.

ifAdminHack and ifOperHack

The return values of ifAdminStatus and ifOperStatus are not very useful for graphing. Use ifOperHack and ifAdminHack instead. They return 1 for UP and 0 otherwise.

Note these are not real MIB entities but mrtg hacks

PseudoZero and PseudoOne

will return 0 and 1 respectively

Note these are not real MIB entities but mrtg hacks

AUTHOR

Tobias Oetiker <tobi@oetiker.ch>