Rechercher une page de manuel
pandoc
Langue: en
Version: 331200 (ubuntu - 24/10/10)
Section: 1 (Commandes utilisateur)
NAME
pandoc - general markup converter
SYNOPSIS
pandoc [options] [input-file]...
DESCRIPTION
Pandoc converts files from one markup format to another. It can read markdown and (subsets of) reStructuredText, HTML, and LaTeX, and it can write plain text, markdown, reStructuredText, HTML, LaTeX, ConTeXt, Texinfo, groff man, MediaWiki markup, RTF, OpenDocument XML, ODT, DocBook XML, and S5 HTML slide shows.
If no input-file is specified, input is read from stdin. Otherwise, the input-files are concatenated (with a blank line between each) and used as input. Output goes to stdout by default (though output to stdout is disabled for the odt output format). For output to a file, use the -o option:
pandoc -o output.html input.txt
Instead of a file, an absolute URI may be given. In this case pandoc will fetch the content using HTTP:
pandoc -f html -t markdown http://www.fsf.org
The input and output formats may be specified using command-line options (see OPTIONS, below, for details). If these formats are not specified explicitly, Pandoc will attempt to determine them from the extensions of the input and output filenames. If input comes from stdin or from a file with an unknown extension, the input is assumed to be markdown. If no output filename is specified using the -o option, or if a filename is specified but its extension is unknown, the output will default to HTML. Thus, for example,
pandoc -o chap1.tex chap1.txt
converts chap1.txt from markdown to LaTeX. And
pandoc README
converts README from markdown to HTML.
Pandoc's version of markdown is an extended variant of standard markdown: the differences are described in the README file in the user documentation. If standard markdown syntax is desired, the --strict option may be used.
Pandoc uses the UTF-8 character encoding for both input and output (unless compiled with GHC 6.12 or higher, in which case it uses the local encoding). If your local character encoding is not UTF-8, you should pipe input and output through iconv:
iconv -t utf-8 input.txt | pandoc | iconv -f utf-8
OPTIONS
- -f FORMAT, -r FORMAT, --from=FORMAT, --read=FORMAT
- Specify input format. FORMAT can be native (native Haskell), markdown (markdown or plain text), rst (reStructuredText), html (HTML), or latex (LaTeX). If +lhs is appended to markdown, rst, or latex, the input will be treated as literate Haskell source.
- -t FORMAT, -w FORMAT, --to=FORMAT, --write=FORMAT
- Specify output format. FORMAT can be native (native Haskell), plain (plain text), markdown (markdown), rst (reStructuredText), html (HTML), latex (LaTeX), context (ConTeXt), man (groff man), mediawiki (MediaWiki markup), texinfo (GNU Texinfo), docbook (DocBook XML), opendocument (OpenDocument XML), odt (OpenOffice text document), s5 (S5 HTML and javascript slide show), or rtf (rich text format). Note that odt output will not be directed to stdout; an output filename must be specified using the -o/--output option. If +lhs is appended to markdown, rst, latex, or html, the output will be rendered as literate Haskell source.
- -s, --standalone
- Produce output with an appropriate header and footer (e.g. a standalone HTML, LaTeX, or RTF file, not a fragment).
- -o FILE, --output=FILE
- Write output to FILE instead of stdout. If FILE is `-', output will go to stdout.
- -p, --preserve-tabs
- Preserve tabs instead of converting them to spaces.
- --tab-stop=TABSTOP
- Specify tab stop (default is 4).
- --strict
- Use strict markdown syntax, with no extensions or variants.
- --reference-links
- Use reference-style links, rather than inline links, in writing markdown or reStructuredText.
- -R, --parse-raw
- Parse untranslatable HTML codes and LaTeX environments as raw HTML or LaTeX, instead of ignoring them.
- -S, --smart
- Use smart quotes, dashes, and ellipses. (This option is significant only when the input format is markdown. It is selected automatically when the output format is latex or context.)
- -mURL, --latexmathml=URL
- Use LaTeXMathML to display embedded TeX math in HTML output. To insert a link to a local copy of the LaTeXMathML.js script, provide a URL. If no URL is provided, the contents of the script will be inserted directly into the HTML header.
- --mathml
- Convert TeX math to MathML. In standalone mode, a small javascript will be inserted that allows the MathML to be viewed on some browsers.
- --jsmath=URL
- Use jsMath to display embedded TeX math in HTML output. The URL should point to the jsMath load script; if provided, it will be linked to in the header of standalone HTML documents.
- --gladtex
- Enclose TeX math in <eq> tags in HTML output. These can then be processed by gladTeX to produce links to images of the typeset formulas.
- --mimetex=URL
- Render TeX math using the mimeTeX CGI script. If URL is not specified, it is assumed that the script is at /cgi-bin/mimetex.cgi.
- -i, --incremental
- Make list items in S5 display incrementally (one by one).
- --xetex
- Create LaTeX outut suitable for processing by XeTeX.
- -N, --number-sections
- Number section headings in LaTeX, ConTeXt, or HTML output. (Default is not to number them.)
- --no-wrap
- Disable text wrapping in output. (Default is to wrap text.)
- --sanitize-html
- Sanitizes HTML (in markdown or HTML input) using a whitelist. Unsafe tags are replaced by HTML comments; unsafe attributes are omitted. URIs in links and images are also checked against a whitelist of URI schemes.
- --email-obfuscation=none|javascript|references
- Specify a method for obfuscating mailto: links in HTML documents. none leaves mailto: links as they are. javascript obfuscates them using javascript. references obfuscates them by printing their letters as decimal or hexadecimal character references. If --strict is specified, references is used regardless of the presence of this option.
- --id-prefix=string
- Specify a prefix to be added to all automatically generated identifiers in HTML output. This is useful for preventing duplicate identifiers when generating fragments to be included in other pages.
- --indented-code-classes=classes
- Specify classes to use for indented code blocks---for example, perl,numberLines or haskell. Multiple classes may be separated by spaces or commas.
- --toc, --table-of-contents
- Include an automatically generated table of contents (HTML, markdown, RTF) or an instruction to create one (LaTeX, reStructuredText). This option has no effect on man, DocBook, or S5 output.
- --base-header-level=LEVEL
- Specify the base level for headers (defaults to 1).
- --template=FILE
- Use FILE as a custom template for the generated document. Implies -s. See TEMPLATES below for a description of template syntax. If this option is not used, a default template appropriate for the output format will be used. See also -D/--print-default-template.
- -V KEY=VAL, --variable=KEY:VAL
- Set the template variable KEY to the value VAL when rendering the document in standalone mode. This is only useful when the --template option is used to specify a custom template, since pandoc automatically sets the variables used in the default templates.
- -c CSS, --css=CSS
- Link to a CSS style sheet. CSS is the pathname of the style sheet.
- -H FILE, --include-in-header=FILE
- Include contents of FILE at the end of the header. Implies -s.
- -B FILE, --include-before-body=FILE
- Include contents of FILE at the beginning of the document body. Implies -s.
- -A FILE, --include-after-body=FILE
- Include contents of FILE at the end of the document body. Implies -s.
- -C FILE, --custom-header=FILE
- Use contents of FILE as the document header. Note: This option is deprecated. Users should transition to using --template instead.
- --reference-odt=filename
- Use the specified file as a style reference in producing an ODT. For best results, the reference ODT should be a modified version of an ODT produced using pandoc. The contents of the reference ODT are ignored, but its stylesheets are used in the new ODT. If no reference ODT is specified on the command line, pandoc will look for a file reference.odt in the user data directory (see --data-dir). If this is not found either, sensible defaults will be used.
- -D FORMAT, --print-default-template=FORMAT
- Print the default template for an output FORMAT. (See -t for a list of possible FORMATs.)
- -T STRING, --title-prefix=STRING
- Specify STRING as a prefix to the HTML window title.
- --data-dir=DIRECTORY
- Specify the user data directory to search for pandoc data files. If this option is not specified, the default user data directory will be used:
$HOME/.pandoc
in unix and
C:\Documents And Settings\USERNAME\Application Data\pandoc
in Windows. A reference ODT, templates directory, s5 directory placed in this directory will override pandoc's normal defaults.
- --dump-args
- Print information about command-line arguments to stdout, then exit. The first line of output contains the name of the output file specified with the -o option, or `-' (for stdout) if no output file was specified. The remaining lines contain the command-line arguments, one per line, in the order they appear. These do not include regular Pandoc options and their arguments, but do include any options appearing after a `--' separator at the end of the line. This option is intended primarily for use in wrapper scripts.
- --ignore-args
- Ignore command-line arguments (for use in wrapper scripts). Regular Pandoc options are not ignored. Thus, for example,
pandoc --ignore-args -o foo.html -s foo.txt -- -e latin1
pandoc -o foo.html -s
- -v, --version
- Print version.
- -h, --help
- Show usage message.
TEMPLATES
When the -s/--standalone option is used, pandoc uses a template to add header and footer material that is needed for a self-standing document. To see the default template that is used, just type
pandoc --print-default-template=FORMAT
where FORMAT is the name of the output format. A custom template can be specified using the --template option. You can also override the system default templates for a given output format FORMAT by putting a file templates/FORMAT.template in the user data directory (see --data-dir, below).
Templates may contain variables. Variable names are sequences of alphanumerics, -, and _, starting with a letter. A variable name surrounded by $ signs will be replaced by its value. For example, the string $title$ in
<title>$title$</title>
will be replaced by the document title.
To write a literal $ in a template, use $$.
Some variables are set automatically by pandoc. These vary somewhat depending on the output format, but include:
- legacy-header
- contents specified by -C/--custom-header
- header-includes
- contents specified by -H/--include-in-header (may have multiple values)
- toc
- non-null value if --toc/--table-of-contents was specified
- include-before
- contents specified by -B/--include-before-body (may have multiple values)
- include-after
- contents specified by -A/--include-after-body (may have multiple values)
- body
- body of document
- title
- title of document, as specified in title block
- author
- author of document, as specified in title block (may have multiple values)
- date
- date of document, as specified in title block
Variables may be set at the command line using the -V/--variable option. This allows users to include custom variables in their templates.
Templates may contain conditionals. The syntax is as follows:
$if(variable)$
X
$else$
Y
$endif$
This will include X in the template if variable has a non-null value; otherwise it will include Y. X and Y are placeholders for any valid template text, and may include interpolated variables or other conditionals. The $else$ section may be omitted.
When variables can have multiple values (for example, author in a multi-author document), you can use the $for$ keyword:
$for(author)$
<meta name="author" content="$author$" />
$endfor$
You can optionally specify a separator to be used between consecutive items:
$for(author)$$author$$sep$, $endfor$
SEE ALSO
markdown2pdf (1). The README file distributed with Pandoc contains full documentation.
The Pandoc source code and all documentation may be downloaded from <http://johnmacfarlane.net/pandoc/>.
AUTHORS
John MacFarlane.Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre