prove

Langue: en

Version: 2010-10-08 (fedora - 01/12/10)

Section: 1 (Commandes utilisateur)

NAME

prove - Run tests through a TAP harness.

USAGE

  prove [options] [files or directories]
 
 

OPTIONS

Boolean options:
  -v,  --verbose     Print all test lines.
  -l,  --lib         Add 'lib' to the path for your tests (-Ilib).
  -b,  --blib        Add 'blib/lib' and 'blib/arch' to the path for your tests
  -s,  --shuffle     Run the tests in random order.
  -c,  --color       Colored test output (default).
       --nocolor     Do not color test output.
       --count       Show the X/Y test count when not verbose (default)
       --nocount     Disable the X/Y test count.
  -D   --dry         Dry run. Show test that would have run.
       --ext         Set the extension for tests (default '.t')
  -f,  --failures    Show failed tests.
  -o,  --comments    Show comments.
       --fork        Fork to run harness in multiple processes.
       --ignore-exit Ignore exit status from test scripts.
  -m,  --merge       Merge test scripts' STDERR with their STDOUT.
  -r,  --recurse     Recursively descend into directories.
       --reverse     Run the tests in reverse order.
  -q,  --quiet       Suppress some test output while running tests.
  -Q,  --QUIET       Only print summary results.
  -p,  --parse       Show full list of TAP parse errors, if any.
       --directives  Only show results with TODO or SKIP directives.
       --timer       Print elapsed time after each test.
       --normalize   Normalize TAP output in verbose output
  -T                 Enable tainting checks.
  -t                 Enable tainting warnings.
  -W                 Enable fatal warnings.
  -w                 Enable warnings.
  -h,  --help        Display this help
  -?,                Display this help
  -H,  --man         Longer manpage for prove
       --norc        Don't process default .proverc
 
 

Options that take arguments:

  -I                 Library paths to include.
  -P                 Load plugin (searches App::Prove::Plugin::*.)
  -M                 Load a module.
  -e,  --exec        Interpreter to run the tests ('' for compiled tests.)
       --harness     Define test harness to use.  See TAP::Harness.
       --formatter   Result formatter to use. See TAP::Harness.
  -a,  --archive     Store the resulting TAP in an archive file.
  -j,  --jobs N      Run N test jobs in parallel (try 9.)
       --state=opts  Control prove's persistent state.
       --rc=rcfile   Process options from rcfile
 
 

NOTES

.proverc

If ~/.proverc or ./.proverc exist they will be read and any options they contain processed before the command line options. Options in .proverc are specified in the same way as command line options:
     # .proverc
     --state=hot,fast,save
     -j9 --fork
 
 

Additional option files may be specified with the "--rc" option. Default option file processing is disabled by the "--norc" option.

Under Windows and VMS the option file is named _proverc rather than .proverc and is sought only in the current directory.

Reading from STDIN

If you have a list of tests (or URLs, or anything else you want to test) in a file, you can add them to your tests by using a '-':
  prove - < my_list_of_things_to_test.txt
 
 

See the "README" in the "examples" directory of this distribution.

Default Test Directory

If no files or directories are supplied, "prove" looks for all files matching the pattern "t/*.t".

Colored Test Output

Colored test output is the default, but if output is not to a terminal, color is disabled. You can override this by adding the "--color" switch.

Color support requires Term::ANSIColor on Unix-like platforms and Win32::Console windows. If the necessary module is not installed colored output will not be available.

Exit Code

If the tests fail "prove" will exit with non-zero status.

Arguments to Tests

It is possible to supply arguments to tests. To do so separate them from prove's own arguments with the arisdottle, '::'. For example
  prove -v t/mytest.t :: --url http://example.com
 
 

would run t/mytest.t with the options '--url http://example.com'. When running multiple tests they will each receive the same arguments.

--exec

Normally you can just pass a list of Perl tests and the harness will know how to execute them. However, if your tests are not written in Perl or if you want all tests invoked exactly the same way, use the "-e", or "--exec" switch:
  prove --exec '/usr/bin/ruby -w' t/
  prove --exec '/usr/bin/perl -Tw -mstrict -Ilib' t/
  prove --exec '/path/to/my/customer/exec'
 
 

--merge

If you need to make sure your diagnostics are displayed in the correct order relative to test results you can use the "--merge" option to merge the test scripts' STDERR into their STDOUT.

This guarantees that STDOUT (where the test results appear) and STDOUT (where the diagnostics appear) will stay in sync. The harness will display any diagnostics your tests emit on STDERR.

Caveat: this is a bit of a kludge. In particular note that if anything that appears on STDERR looks like a test result the test harness will get confused. Use this option only if you understand the consequences and can live with the risk.

--state

You can ask "prove" to remember the state of previous test runs and select and/or order the tests to be run based on that saved state.

The "--state" switch requires an argument which must be a comma separated list of one or more of the following options.

last
Run the same tests as the last time the state was saved. This makes it possible, for example, to recreate the ordering of a shuffled test.
     # Run all tests in random order
     $ prove -b --state=save --shuffle
 
     # Run them again in the same order
     $ prove -b --state=last
 
 
failed
Run only the tests that failed on the last run.
     # Run all tests
     $ prove -b --state=save
     
     # Run failures
     $ prove -b --state=failed
 
 

If you also specify the "save" option newly passing tests will be excluded from subsequent runs.

     # Repeat until no more failures
     $ prove -b --state=failed,save
 
 
passed
Run only the passed tests from last time. Useful to make sure that no new problems have been introduced.
all
Run all tests in normal order. Multple options may be specified, so to run all tests with the failures from last time first:
     $ prove -b --state=failed,all,save
 
 
hot
Run the tests that most recently failed first. The last failure time of each test is stored. The "hot" option causes tests to be run in most-recent- failure order.
     $ prove -b --state=hot,save
 
 

Tests that have never failed will not be selected. To run all tests with the most recently failed first use

     $ prove -b --state=hot,all,save
 
 

This combination of options may also be specified thus

     $ prove -b --state=adrian
 
 
todo
Run any tests with todos.
slow
Run the tests in slowest to fastest order. This is useful in conjunction with the "-j" parallel testing switch to ensure that your slowest tests start running first.
     $ prove -b --state=slow -j9
 
 
fast
Run test tests in fastest to slowest order.
new
Run the tests in newest to oldest order based on the modification times of the test scripts.
old
Run the tests in oldest to newest order.
fresh
Run those test scripts that have been modified since the last test run.
save
Save the state on exit. The state is stored in a file called .prove (_prove on Windows and VMS) in the current directory.

The "--state" switch may be used more than once.

     $ prove -b --state=hot --state=all,save
 
 

@INC

prove introduces a separation between ``options passed to the perl which runs prove'' and ``options passed to the perl which runs tests''; this distinction is by design. Thus the perl which is running a test starts with the default @INC. Additional library directories can be added via the "PERL5LIB" environment variable, via -Ifoo in "PERL5OPT" or via the "-Ilib" option to prove.

Taint Mode

Normally when a Perl program is run in taint mode the contents of the "PERL5LIB" environment variable do not appear in @INC.

Because "PERL5LIB" is often used during testing to add build directories to @INC prove (actually TAP::Parser::Source::Perl) passes the names of any directories found in "PERL5LIB" as -I switches. The net effect of this is that "PERL5LIB" is honoured even when prove is run in taint mode.

PLUGINS

Plugins can be loaded using the "-Pplugin" syntax, eg:
   prove -PMyPlugin
 
 

This will search for a module named "App::Prove::Plugin::MyPlugin", or failing that, "MyPlugin". If the plugin can't be found, "prove" will complain & exit.

You can pass arguments to your plugin by appending "=arg1,arg2,etc" to the plugin name:

   prove -PMyPlugin=fou,du,fafa
 
 

Please check individual plugin documentation for more details.

Available Plugins

For an up-to-date list of plugins available, please check CPAN:

<http://search.cpan.org/search?query=App%3A%3AProve+Plugin>

Writing Plugins

Please see ``PLUGINS'' in App::Prove.