r.out.gdal.1grass

Langue: en

Version: 330572 (ubuntu - 24/10/10)

Section: 1 (Commandes utilisateur)

NAME

r.out.gdal - Exports GRASS raster maps into GDAL supported formats.

KEYWORDS

raster, export

SYNOPSIS

r.out.gdal
r.out.gdal help
r.out.gdal [-lcf] [input=name] [format=string] [type=string] [output=name] [createopt=string[,string,...]] [metaopt=string[,string,...]] [nodata=float] [--verbose] [--quiet]

Flags:

-l

List supported output formats
-c

Do not write GDAL standard colortable
Only applicable to Byte or UInt16 data types.
-f

Force raster export despite any warnings of data loss
Overrides nodata safety check.
--verbose

Verbose module output
--quiet

Quiet module output

Parameters:

input=name

Name of raster map (or group) to export
format=string

GIS format to write (case sensitive, see also -l flag)
Options: VRT,GTiff,NITF,HFA,ELAS,AAIGrid,DTED,PNG,JPEG,MEM,GIF,XPM,BMP,PCIDSK,PCRaster,ILWIS,SGI,SRTMHGT,Leveller,Terragen,GMT,netCDF,HDF4Image,ERS,JPEG2000,FIT,RMF,RST,INGR,GSAG,GSBG,PNM,ENVI,EHdr,PAux,MFF,MFF2,BT,IDA,USGSDEM,ADRG,BLX
Default: GTiff
type=string

File type
Options: Byte,Int16,UInt16,Int32,UInt32,Float32,Float64,CInt16,CInt32,CFloat32,CFloat64
output=name

Name for output raster file
createopt=string[,string,...]

Creation option(s) to pass to the output format driver
In the form of "NAME=VALUE", separate multiple entries with a comma.
metaopt=string[,string,...]

Metadata key(s) and value(s) to include
In the form of "META-TAG=VALUE", separate multiple entries with a comma. Not supported by all output format drivers.
nodata=float

Assign a specified nodata value to output bands

DESCRIPTION

r.out.gdal allows a user to export a GRASS raster map layer into any GDAL supported raster map format. If a GRASS raster map is exported for a particular application, the application's native format would be preferrable. GeoTIFF is supported by a wide range of applications (see also NOTES on GeoTIFF below).

To specify multiple creation options use a comma separated list (createopt="TFW=YES,COMPRESS=DEFLATE").

For possible createopt and metaopt parameters please consult the individual supported formats pages on the GDAL website. The createopt parameter may be used to create TFW or World files ("TFW=YES","WORLDFILE=ON").

r.out.gdal also supports the export of multiband rasters as a group, when the imagery group's name is entered as input. (created imagery groups with the i.group module)

As with most GRASS raster modules, the current region extents and region resolution are used, and a MASK is respected if present. Use g.region's "align=", or "rast=" options if you need to realign the region settings to match the original map's before export.

SUPPORTED RASTER FORMATS

The set of supported raster formats written by r.out.gdal depends on the local GDAL installation. Available may be (incomplete list):



  AAIGrid: Arc/Info ASCII Grid

  BMP: MS Windows Device Independent Bitmap

  BSB: Maptech BSB Nautical Charts

  DTED: DTED Elevation Raster

  ELAS: ELAS

  ENVI: ENVI .hdr Labelled

  FIT: FIT Image

  GIF: Graphics Interchange Format (.gif)

  GTiff: GeoTIFF

  HDF4Image: HDF4 Dataset

  HFA: Erdas Imagine Images (.img)

  JPEG2000: JPEG-2000 part 1 (ISO/IEC 15444-1)

  JPEG: JPEG JFIF

  MEM: In Memory Raster

  MFF2: Atlantis MFF2 (HKV) Raster

  MFF: Atlantis MFF Raster

  NITF: National Imagery Transmission Format

  PAux: PCI .aux Labelled

  PCIDSK: PCIDSK Database File

  PNG: Portable Network Graphics

  PNM: Portable Pixmap Format (netpbm)

  VRT: Virtual Raster

  XPM: X11 PixMap Format

NOTES

Out of the GDAL data types, the closest match for GRASS CELL, FCELL and DCELL rasters are respectively Int32, Float32 and Float64. These are not exact equivalents, but they will preserve the maximum possible data range and number of decimal places for each respective GRASS raster data type. Please keep in mind that not all CELL rasters will require Int32 - e.g., 0-255 CELL raster are covered by the Byte type as well. Moreover, some GDAL-supported formats do not support all the data types possible in GDAL and GRASS. Use r.info to check the data type and range for your GRASS raster, refer to specific format documentation (on the GDAL website), format vendor's documentation, and e.g. the Wikipedia article Typical boundaries of primitive integral types for details.

Ranges of GDAL data types



  GDAL data type               minimum          maximum



  Byte                               0              255


  UInt16                             0           65,535


  Int16, CInt16                -32,768           32,767


  UInt32                             0    4,294,967,295


  Int32, CInt32         -2,147,483,648    2,147,483,647


  Float32, CFloat32            -3.4E38           3.4E38


  Float64, CFloat64          -1.79E308         1.79E308

If there is a need to keep file sizes small, use the simplest data type covering the data range of the raster(s) to be exported, e.g., if suitable use Byte rather than UInt16; use Int16 rather than Int32; or use Float32 rather than Float64. In addition, the COMPRESS createopt used can have a very large impact on the size of the output file.

Some software may not recognize all of the compression methods available for a given file format, and certain compression methods may only be supported for certain data types (depends on vendor and version).

If the export settings are set such that data loss would occur in the output file (i.e, due to the particular choice of data type and/or file type), the normal behaviour of r.out.gdal in this case would be to issue an error message describing the problem and exit without exporting. The -f flag allows raster export even if some of the data loss tests are not passed, and warnings are issued instead of errors.

r.out.gdal exports may appear all black or gray on initial display in other GIS software. This is not a bug of r.out.gdal, but often caused by the default color table assigned by that software. The default color table may be grayscale covering the whole range of possible values which is very large for e.g. Int32 or Float32. E.g. stretching the color table to actual min/max would help (sometimes under symbology).

GeoTIFF caveats

GeoTIFF exports can only be displayed by standard image viewers if the GDAL data type was set to Byte and the GeoTIFF contains either one or three bands. All other data types and numbers of bands can be properly read with GIS software only. Although GeoTIFF files usually have a .tif extension, these files are not necessarily images but first of all spatial raster datasets, e.g. SRTM DEM version 4.

When writing out multi-band GeoTIFF images for users of ESRI software or ImageMagick, the interleaving mode should be set to "pixel" using createopt="INTERLEAVE=PIXEL". BAND interleaving is slightly more efficient, but not supported by some applications. This issue only arises when writing out multi-band imagery groups.

Improving GeoTIFF compatibility

To create a GeoTIFF that is highly compatible with various other GIS software packages, it is recommended to keep the GeoTIFF file as simple as possible. You will have to experiment with which options your software is compatible with, as this varies widely between vendors and versions. Long term, the less metadata you have to remove the more self-documenting (and useful) the dataset will be.

Here are some things to try:

Create a World file with createopt="TFW=YES".
Do not use GeoTIFF internal compression. Other GIS software often supports only a subset of the available compression methods with the supported methods differing between GIS software packages. Unfortunately this means the output image can be rather huge, but the file can be compressed with software like zip, gnuzip, or bzip2.
Skip exporting the color table. Color tables are not always properly rendered, particularly for type UInt16, and the GeoTIFF file can appear completely black. If you are lucky the problematic software package has a method to reset the color table and assign a new color table (sometimes called symbology).
Keep metadata simple with createopt="PROFILE=GeoTIFF" or createopt="PROFILE=BASELINE". With BASELINE no GDAL or GeoTIFF tags will be written and a World file is required (createopt="TFW=YES").
Adding overviews with gdaladdo after exporting can speed up display. Note that other software might create their own overviews, ignoring existing overviews.

EXAMPLES

Export the integer raster roads map to GeoTIFF format:


r.out.gdal input=roads output=roads.tif type=UInt16

Export a DCELL raster map in GeoTIFF format suitable for ESRI software:


r.out.gdal in=elevation.10m out=ned_elev10m.tif type=Float64 createopt="PROFILE=GeoTIFF,TFW=YES"

Export R,G,B imagery bands in GeoTIFF format suitable for ESRI software:


i.group group=nc_landsat_rgb input=lsat7_2002_30,lsat7_2002_20,lsat7_2002_10
r.out.gdal in=nc_landsat_rgb out=nc_landsat_rgb.tif type=Byte createopt="PROFILE=GeoTIFF,INTERLEAVE=PIXEL,TFW=YES"

Export the floating point raster elevation map to ERDAS/IMG format:


r.out.gdal input=elevation.10m output=elev_dem10.img format=HFA type=Float32

Export group of image maps as multi-band file


g.list group
i.group group=tm7 subgroup=tm7 input=tm7_10,tm7_20,tm7_30,tm7_40,tm7_50,tm7_60,tm7_70
i.group -l tm7
r.out.gdal tm7 type=UInt16 out=lsat_multiband.tif
gdalinfo lsat_multiband.tif

 "ERROR 6: SetColorInterpretation() not supported for this dataset.": This may indicate that the color table was not written properly. But usually it will be correct and the message can be ignored.

 "ERROR 6: SetNoDataValue() not supported for this dataset.": The selected output format does not support "no data". It is recommended to use a different output format if your data contains NULLs.

 "Warning 1: Lost metadata writing to GeoTIFF ... too large to fit in tag.": The color table metadata may be too large. It is recommended to simplify or not write the color table, or use a different output format.

SEE ALSO

The GDAL supported formats page.
r.out.ascii, r.out.arc, r.out.bin, r.out.mat, r.out.png, r.out.ppm, r.out.tiff
r.out.gdal.sh
(old shell script version using gdal_translate)

REFERENCES

GDAL Pages: http://www.gdal.org

AUTHORS

Vytautas Vebra (oliver4grass at gmail.com)
Markus Metz (improved nodata logic)

Last changed: $Date: 2010-05-05 15:08:23 +0200 (mer, 05 mag 2010) $

Full index

© 2003-2010 GRASS Development Team