Rechercher une page de manuel

Chercher une autre page de manuel:

rapolicy

Langue: en

Version: 22 July 2002 (mandriva - 01/05/08)

Section: 1 (Commandes utilisateur)

NAME

rapolicy - compare a argus(8) data file/stream against a Cisco Access Control List. Copyright (c) 2000-2003 QoSient. All rights reserved.

SYNOPSIS

rapolicy -r argus-file [ra options]

DESCRIPTION

Rapolicy reads argus data from an argus-file list, and tests the argus data stream against a Cisco access control list configuration file, printing out records that represent activity that would violate the policy. Rapolicy can be used to indicate access control violations, as well as test new access control definitions prior to installing them in a router.

OPTIONS

Rapolicy, like all ra based clients, supports a large number of options. Options that have specific meaning to rapolicy are:
    -f <Cisco ACL file> Print records that violate the policy.
    -D 0 (default)      Print records that violate the policy.
    -D 1                Print records and the violated ruleset.
    -D 2                Print all records and the ruleset that matched.
 
 See ra(1) for a complete description of ra options.
 
 

EXAMPLE INVOCATION

rapolicy -r argus.file
 
 

CISCO ACL SYNTAX

There does not seem to be authoritative Cisco-ACL-Documentation, nor ACL syntax standardization. Because Cisco has been know to improve its ACL rules syntax, rapolicy is known to work with Cisco ACL router defintions up to July, 2002.

A Cisco ACL configuration file consists of a collection of any number of ACL statements, each on a separte line. The syntax of an ACL statement is:

    ACL        = "access-list" ID ACTION PROTOCOL SRC DST NOTIFICATION
    
    ID         = Number
    ACTION     = permit | deny
    PROTO      = protocol name | protocol number
    
    SRC | DST  = ADDRESS [PORTMATCH]
    
    ADDRESS    = any | host HOSTADDR | HOSTADDR HOSTMASK
    HOSTADDR   = ipV4 address
    HOSTMASK   = matching-mask
    
    PORTMATCH  = PORTOP PORTNUM | range PORTRANGE
    PORTOP     = eq | lt | gt | neq | established 
    
    PORTRANGE  =  PORTNUM PORTNUM
    PORTNUM    =  TCP or UDP port value (unsigned decimal from 0 to 65535)
 
 
 
 

EXAMPLE CONFIGURATION

This example Cisco Access Control List configuration is provided as an example only. No effort has been made to verify that this example Access Control List enforces a useful access control policy of any kind.
 #allow www-traffic to webserver
 access-list 102 permit tcp any 193.174.13.99 0.0.0.0 eq 80
 
 #allow ftp control connection to server
 access-list 102 permit tcp any 193.174.13.99 0.0.0.0 eq 21
 
 #allow normal ftp
 access-list 102 permit tcp any 193.174.13.99 0.0.0.0 eq 20
 
 #allow ftp passive conncetions in portrange 10000 to 10500
 access-list 102 permit tcp any host 193.174.13.99 range 10000 10500
 
 #dummy example
 access-list 102 permit tcp host 193.174.13.1 eq 12345 host 193.174.13.2 range 12345 23456
 
 #deny the rest
 access-list 102 deny tcp any any
 
 #same thing in other words:
 access-list 102 deny tcp 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
 

AUTHORS

 Carter Bullard (carter@qosient.com).
 Olaf Gellert (gellert@pca.dfn.de).
 

SEE ALSO

ra(1), rarc(5), argus(8)
Les optimistes pensent que nous vivons dans le meilleur des mondes
possibles, les pessimistes en sont intimement persuadés.
-+- Pierre Desproges -+-