rrdtune

Langue: en

Autres versions - même langue

Version: 2008-03-15 (fedora - 04/07/09)

Section: 1 (Commandes utilisateur)

NAME

rrdtune - Modify some basic properties of a Round Robin Database

SYNOPSIS

rrdtool tune filename [--heartbeat|-h ds-name:heartbeat] [--minimum|-i ds-name:min] [--maximum|-a ds-name:max] [--data-source-type|-d ds-name:DST] [--data-source-rename|-r old-name:new-name] [--deltapos scale-value] [--deltaneg scale-value] [--failure-threshold failure-threshold] [--window-length window-length] [--alpha adaption-parameter] [--beta adaption-parameter] [--gamma adaption-parameter] [--gamma-deviation adaption-parameter] [--smoothing-window fraction-of-season] [--smoothing-window-deviation fraction-of-season] [--aberrant-reset ds-name]

DESCRIPTION

The tune option allows you to alter some of the basic configuration values stored in the header area of a Round Robin Database (RRD).

One application of the tune function is to relax the validation rules on an RRD. This allows to fill a new RRD with data available in larger intervals than what you would normally want to permit. Be very careful with tune operations for COMPUTE data sources. Setting the min, max, and heartbeat for a COMPUTE data source without changing the data source type to a non-COMPUTE DST WILL corrupt the data source header in the RRD.

A second application of the tune function is to set or alter parameters used by the specialized function RRAs for aberrant behavior detection.

filename
The name of the RRD you want to tune.
--heartbeat|-h ds-name:heartbeat
modify the heartbeat of a data source. By setting this to a high value the RRD will accept things like one value per day.
--minimum|-i ds-name:min
alter the minimum value acceptable as input from the data source. Setting min to 'U' will disable this limit.
--maximum|-a ds-name:max
alter the maximum value acceptable as input from the data source. Setting max to 'U' will disable this limit.
--data-source-type|-d ds-name:DST
alter the type DST of a data source.
--data-source-rename|-r old-name:new-name
rename a data source.
--deltapos scale-value
Alter the deviation scaling factor for the upper bound of the confidence band used internally to calculate violations for the FAILURES RRA. The default value is 2. Note that this parameter is not related to graphing confidence bounds which must be specified as a CDEF argument to generate a graph with confidence bounds. The graph scale factor need not to agree with the value used internally by the FAILURES RRA.
--deltaneg scale-value
Alter the deviation scaling factor for the lower bound of the confidence band used internally to calculate violations for the FAILURES RRA. The default value is 2. As with --deltapos, this argument is unrelated to the scale factor chosen when graphing confidence bounds.
--failure-threshold failure-threshold
Alter the number of confidence bound violations that constitute a failure for purposes of the FAILURES RRA. This must be an integer less than or equal to the window length of the FAILURES RRA. This restriction is not verified by the tune option, so one can reset failure-threshold and window-length simultaneously. Setting this option will reset the count of violations to 0.
--window-length window-length
Alter the number of time points in the temporal window for determining failures. This must be an integer greater than or equal to the window length of the FAILURES RRA and less than or equal to 28. Setting this option will reset the count of violations to 0.
--alpha adaption-parameter
Alter the intercept adaptation parameter for the Holt-Winters forecasting algorithm. This parameter must be between 0 and 1.
--beta adaption-parameter
Alter the slope adaptation parameter for the Holt-Winters forecasting algorithm. This parameter must be between 0 and 1.
--gamma adaption-parameter
Alter the seasonal coefficient adaptation parameter for the SEASONAL RRA. This parameter must be between 0 and 1.
--gamma-deviation adaption-parameter
Alter the seasonal deviation adaptation parameter for the DEVSEASONAL RRA. This parameter must be between 0 and 1.
--smoothing-window fraction-of-season
Alter the size of the smoothing window for the SEASONAL RRA. This must be between 0 and 1.
--smoothing-window-deviation fraction-of-season
Alter the size of the smoothing window for the DEVSEASONAL RRA. This must be between 0 and 1.
--aberrant-reset ds-name
This option causes the aberrant behavior detection algorithm to reset for the specified data source; that is, forget all it is has learnt so far. Specifically, for the HWPREDICT or MHWPREDICT RRA, it sets the intercept and slope coefficients to unknown. For the SEASONAL RRA, it sets all seasonal coefficients to unknown. For the DEVSEASONAL RRA, it sets all seasonal deviation coefficients to unknown. For the FAILURES RRA, it erases the violation history. Note that reset does not erase past predictions (the values of the HWPREDICT or MHWPREDICT RRA), predicted deviations (the values of the DEVPREDICT RRA), or failure history (the values of the FAILURES RRA). This option will function even if not all the listed RRAs are present.

Due to the implementation of this option, there is an indirect impact on other data sources in the RRD. A smoothing algorithm is applied to SEASONAL and DEVSEASONAL values on a periodic basis. During bootstrap initialization this smoothing is deferred. For efficiency, the implementation of smoothing is not data source specific. This means that utilizing reset for one data source will delay running the smoothing algorithm for all data sources in the file. This is unlikely to have serious consequences, unless the data being collected for the non-reset data sources is unusually volatile during the reinitialization period of the reset data source.

Use of this tuning option is advised when the behavior of the data source time series changes in a drastic and permanent manner.

EXAMPLE 1

"rrdtool tune data.rrd -h in:100000 -h out:100000 -h through:100000"

Set the minimum required heartbeat for data sources 'in', 'out' and 'through' to 10'000 seconds which is a little over one day in data.rrd. This would allow to feed old data from MRTG-2.0 right into RRDtool without generating *UNKNOWN* entries.

EXAMPLE 2

"rrdtool tune monitor.rrd --window-length 5 --failure-threshold 3"

If the FAILURES RRA is implicitly created, the default window-length is 9 and the default failure-threshold is 7. This command now defines a failure as 3 or more violations in a temporal window of 5 time points.

AUTHOR

Tobias Oetiker <tobi@oetiker.ch>