Rechercher une page de manuel
rtcanconfig
Langue: en
Version: 2008-04-19 (debian - 07/07/09)
Section: 1 (Commandes utilisateur)
NAME
rtcanconfig - Xenomai tool for configuring the CAN controllerSYNOPSIS
rtcanconfig <can-interface> [options] [up|down|start|stop|sleep]DESCRIPTION
rtcanconfig is part of Xenomai. It is used to configure the CAN controller. The system must run a suitable Xenomai enabled kernel with the respective module (CAN).OPTIONS
rtcanconfig accepts the following options:- -v, --verbose
- be verbose
- -h, --help
- a usage description
- -c, --ctrlmode=CTRLMODE
- listenonly, loopback or none
- -b, --baudrate=BPS
- baudrate in bits/sec
- -B, --bittime=BTR0:BTR1
- BTR or standard bit-time
- -B, --bittime=BRP:PROP_SEG:PHASE_SEG1:PHASE_SEG2:SJW:SAM
AUTHORS
rtcanconfig was written by Wolfgang Grandegger <wg@grandegger.com> and Sebastian Smolorz <Sebastian.Smolorz@stud.uni-hannover.de>. This man page was written by Roland Stigge <stigge@antcom.de>.Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre