Rechercher une page de manuel
scontrol
Langue: en
Version: 336206 (ubuntu - 24/10/10)
Section: 1 (Commandes utilisateur)
NAME
scontrol - Used view and modify Slurm configuration and state.SYNOPSIS
scontrol [OPTIONS...] [COMMAND...]DESCRIPTION
scontrol is used to view or modify Slurm configuration including: job, job step, node, partition, reservation, and overall system configuration. Most of the commands can only be executed by user root. If an attempt to view or modify configuration information is made by an unauthorized user, an error message will be printed and the requested action will not occur. If no command is entered on the execute line, scontrol will operate in an interactive mode and prompt for input. It will continue prompting for input and executing commands until explicitly terminated. If a command is entered on the execute line, scontrol will execute that command and terminate. All commands and options are case-insensitive, although node names, partition names, and reservation names are case-sensitive (node names "LX" and "lx" are distinct). All commands and options can be abbreviated to the extent that the specification is unique.OPTIONS
- -a, --all
- When the show command is used, then display all partitions, their jobs and jobs steps. This causes information to be displayed about partitions that are configured as hidden and partitions that are unavailable to user's group.
- -d, --detail
- Causes the show command to provide additional details where available.
- -h, --help
- Print a help message describing the usage of scontrol.
- --hide
- Do not display information about hidden partitions, their jobs and job steps. By default, neither partitions that are configured as hidden nor those partitions unavailable to user's group will be displayed (i.e. this is the default behavior).
- -o, --oneliner
- Print information one line per record.
- -Q, --quiet
- Print no warning or informational messages, only fatal error messages.
- -v, --verbose
- Print detailed event logging. Multiple -v's will further increase the verbosity of logging. By default only errors will be displayed.
- -V , --version
- Print version information and exit.
- COMMANDS
- all
- Show all partitions, their jobs and jobs steps. This causes information to be displayed about partitions that are configured as hidden and partitions that are unavailable to user's group.
- abort
- Instruct the Slurm controller to terminate immediately and generate a core file. See "man slurmctld" for information about where the core file will be written.
- checkpoint CKPT_OP ID
- Perform a checkpoint activity on the job step(s) with the specified identification. ID can be used to identify a specific job (e.g. "<job_id>", which applies to all of its existing steps) or a specific job step (e.g. "<job_id>.<step_id>"). Acceptable values for CKPT_OP include:
-
- disable (disable future checkpoints)
- enable (enable future checkpoints)
- able (test if presently not disabled, report start time if checkpoint in progress)
- create (create a checkpoint and continue the job step)
- vacate (create a checkpoint and terminate the job step)
- error (report the result for the last checkpoint request, error code and message)
- restart (restart execution of the previously checkpointed job steps)
- Acceptable values for CKPT_OP include:
- MaxWait=<seconds> maximum time for checkpoint to be written.
- Default value is 10 seconds. Valid with create and vacate options only.
- ImageDir=<directory_name> Location of checkpoint file.
- Valid with create, vacate and restart options only. This value takes precedent over any --checkpoint-dir value specified at job submission time.
- StickToNodes If set, resume job on the same nodes are previously used.
- Valid with the restart option only.
-
- create SPECIFICATION
- Create a new partition or reservation. See the full list of parameters below. Include the tag "res" to create a reservation without specifying a reservation name.
- completing
- Display all jobs in a COMPLETING state along with associated nodes in either a COMPLETING or DOWN state.
- delete SPECIFICATION
- Delete the entry with the specified SPECIFICATION. The two SPECIFICATION choices are PartitionName=<name> and Reservation=<name>. On Dynamically laid out Bluegene systems BlockName=<name> also works.
- detail
- Causes the show command to provide additional details where available, namely the specific CPUs and NUMA memory allocated on each node. Note that on computers with hyperthreading enabled and SLURM configured to allocate cores, each listed CPU represents one physical core. Each hyperthread on that core can be allocated a separate task, so a job's CPU count and task count may differ. See the --cpu_bind and --mem_bind option descriptions in srun man pages for more information. The detail option is currently only supported for the show job command.
- exit
- Terminate the execution of scontrol. This is an independent command with no options meant for use in interactive mode.
- help
- Display a description of scontrol options and commands.
- hide
- Do not display partition, job or jobs step information for partitions that are configured as hidden or partitions that are unavailable to the user's group. This is the default behavior.
- notify job_id message
- Send a message to standard error of the srun command associated with the specified job_id.
- oneliner
- Print information one line per record.
- pidinfo proc_id
- Print the Slurm job id and scheduled termination time corresponding to the supplied process id, proc_id, on the current node. This will work only with processes on node on which scontrol is run, and only for those processes spawned by SLURM and their descendants.
- listpids [job_id[.step_id]] [NodeName]
- Print a listing of the process IDs in a job step (if JOBID.STEPID is provided), or all of the job steps in a job (if job_id is provided), or all of the job steps in all of the jobs on the local node (if job_id is not provided or job_id is "*"). This will work only with processes on the node on which scontrol is run, and only for those processes spawned by SLURM and their descendants. Note that some SLURM configurations (ProctrackType value of pgid or aix) are unable to identify all processes associated with a job or job step.
Note that the NodeName option is only really useful when you have multiple slurmd daemons running on the same host machine. Multiple slurmd daemons on one host are, in general, only used by SLURM developers.
- ping
- Ping the primary and secondary slurmctld daemon and report if they are responding.
- quiet
- Print no warning or informational messages, only fatal error messages.
- quit
- Terminate the execution of scontrol.
- reconfigure
- Instruct all Slurm daemons to re-read the configuration file. This command does not restart the daemons. This mechanism would be used to modify configuration parameters (Epilog, Prolog, SlurmctldLogFile, SlurmdLogFile, etc.) register the physical addition or removal of nodes from the cluster or recognize the change of a node's configuration, such as the addition of memory or processors. The Slurm controller (slurmctld) forwards the request all other daemons (slurmd daemon on each compute node). Running jobs continue execution. Most configuration parameters can be changed by just running this command, however, SLURM daemons should be shutdown and restarted if any of these parameters are to be changed: AuthType, BackupAddr, BackupController, ControlAddr, ControlMach, PluginDir, StateSaveLocation, SlurmctldPort or SlurmdPort.
- resume job_id
- Resume a previously suspended job.
- requeue job_id
- Requeue a running or pending SLURM batch job.
- setdebug LEVEL
- Change the debug level of the slurmctld daemon. LEVEL may be an integer value between zero and nine (using the same values as SlurmctldDebug in the slurm.conf file) or the name of the most detailed message type to be printed: "quiet", "fatal", "error", "info", "verbose", "debug", "debug2", "debug3", "debug4", or "debug5". This value is temporary and will be overwritten whenever the slurmctld daemon reads the slurm.conf configuration file (e.g. when the daemon is restarted or scontrol reconfigure is executed).
- show ENTITY ID
- Display the state of the specified entity with the specified identification. ENTITY may be config, daemons, job, node, partition, reservation, slurmd, step, topology, hostlist or hostnames (also block or subbp on BlueGene systems). ID can be used to identify a specific element of the identified entity: the configuration parameter name, job ID, node name, partition name, reservation name, or job step ID for config, job, node, partition, or step respectively. For an ENTITY of topology, the ID may be a node or switch name. If one node name is specified, all switches connected to that node (and their parent switches) will be shown. If more than one node name is specified, only switches that connect to all named nodes will be shown. hostnames takes an optional hostlist expression as input and writes a list of individual host names to standard output (one per line). If no hostlist expression is supplied, the contents of the SLURM_NODELIST environment variable is used. For example "tux[1-3]" is mapped to "tux1","tux2" and "tux3" (one hostname per line). hostlist takes a list of host names and prints the hostlist expression for them (the inverse of hostnames). hostlist can also take the absolute pathname of a file (beginning with the character '/') containing a list of hostnames. Multiple node names may be specified using simple node range expressions (e.g. "lx[10-20]"). All other ID values must identify a single element. The job step ID is of the form "job_id.step_id", (e.g. "1234.1"). slurmd reports the current status of the slurmd daemon executing on the same node from which the scontrol command is executed (the local host). It can be useful to diagnose problems. By default, all elements of the entity type specified are printed.
- shutdown OPTION
- Instruct Slurm daemons to save current state and terminate. By default, the Slurm controller (slurmctld) forwards the request all other daemons (slurmd daemon on each compute node). An OPTION of slurmctld or controller results in only the slurmctld daemon being shutdown and the slurmd daemons remaining active.
- suspend job_id
- Suspend a running job. Use the resume command to resume its execution. User processes must stop on receipt of SIGSTOP signal and resume upon receipt of SIGCONT for this operation to be effective. Not all architectures and configurations support job suspension.
- takeover
- Instruct SLURM's backup controller (slurmctld) to take over system control. SLURM's backup controller requests control from the primary and waits for its termination. After that, it switches from backup mode to controller mode. If primary controller can not be contacted, it directly switches to controller mode. This can be used to speed up the SLURM controller fail-over mechanism when the primary node is down. This can be used to minimize disruption if the computer executing the primary SLURM controller is scheduled down. (Note: SLURM's primary controller will take the control back at startup.)
- update SPECIFICATION
- Update job, node, partition, or reservation configuration per the supplied specification. SPECIFICATION is in the same format as the Slurm configuration file and the output of the show command described above. It may be desirable to execute the show command (described above) on the specific entity you which to update, then use cut-and-paste tools to enter updated configuration values to the update. Note that while most configuration values can be changed using this command, not all can be changed using this mechanism. In particular, the hardware configuration of a node or the physical addition or removal of nodes from the cluster may only be accomplished through editing the Slurm configuration file and executing the reconfigure command (described above).
- verbose
- Print detailed event logging. This includes time-stamps on data structures, record counts, etc.
- version
- Display the version number of scontrol being executed.
- !!
- Repeat the last command executed.
- SPECIFICATIONS FOR UPDATE COMMAND, JOBS
- Account=<account>
- Account name to be changed for this job's resource use. Value may be cleared with blank data value, "Account=".
- Conn-Type=<type>
- Reset the node connection type. Possible values on Blue Gene are "MESH", "TORUS" and "NAV" (mesh else torus).
- Contiguous=<yes|no>
- Set the job's requirement for contiguous (consecutive) nodes to be allocated. Possible values are "YES" and "NO".
- Dependency=<dependency_list>
- Defer job's initiation until specified job dependency specification is satisfied. Cancel dependency with an empty dependency_list (e.g. "Dependency="). <dependency_list> is of the form <type:job_id[:job_id][,type:job_id[:job_id]]>. Many jobs can share the same dependency and these jobs may even belong to different users.
-
- after:job_id[:jobid...]
- This job can begin execution after the specified jobs have begun execution.
- afterany:job_id[:jobid...]
- This job can begin execution after the specified jobs have terminated.
- afternotok:job_id[:jobid...]
- This job can begin execution after the specified jobs have terminated in some failed state (non-zero exit code, node failure, timed out, etc).
- afterok:job_id[:jobid...]
- This job can begin execution after the specified jobs have successfully executed (ran to completion with non-zero exit code).
- singleton
- This job can begin execution after any previously launched jobs sharing the same job name and user have terminated.
-
- EligibleTime=<time_spec>
- See StartTime.
- ExcNodeList=<nodes>
- Set the job's list of excluded node. Multiple node names may be specified using simple node range expressions (e.g. "lx[10-20]"). Value may be cleared with blank data value, "ExcNodeList=".
- Features=<features>
- Set the job's required node features. The list of features may include multiple feature names separated by ampersand (AND) and/or vertical bar (OR) operators. For example: Features="opteron&video" or Features="fast|faster". In the first example, only nodes having both the feature "opteron" AND the feature "video" will be used. There is no mechanism to specify that you want one node with feature "opteron" and another node with feature "video" in case no node has both features. If only one of a set of possible options should be used for all allocated nodes, then use the OR operator and enclose the options within square brackets. For example: "Features=[rack1|rack2|rack3|rack4]" might be used to specify that all nodes must be allocated on a single rack of the cluster, but any of those four racks can be used. A request can also specify the number of nodes needed with some feature by appending an asterisk and count after the feature name. For example "Features=graphics*4" indicates that at least four allocated nodes must have the feature "graphics." Constraints with node counts may only be combined with AND operators. Value may be cleared with blank data value, for example "Features=".
- Geometry=<geo>
- Reset the required job geometry. On Blue Gene the value should be three digits separated by "x" or ",". The digits represent the allocation size in X, Y and Z dimensions (e.g. "2x3x4").
- JobId=<id>
- Identify the job to be updated. This specification is required.
- Licenses=<name>
- Specification of licenses (or other resources available on all nodes of the cluster) as described in salloc/sbatch/srun man pages.
- MinCPUsNode=<count>
- Set the job's minimum number of CPUs per node to the specified value.
- MinMemoryCPU=<megabytes>
- Set the job's minimum real memory required per allocated CPU to the specified value. Either MinMemoryCPU or MinMemoryNode may be set, but not both.
- MinMemoryNode=<megabytes>
- Set the job's minimum real memory required per node to the specified value. Either MinMemoryCPU or MinMemoryNode may be set, but not both.
- MinTmpDiskNode=<megabytes>
- Set the job's minimum temporary disk space required per node to the specified value.
- Name=<name>
- Set the job's name to the specified value.
- Nice[=delta]
- Adjust job's priority by the specified value. Default value is 100. The adjustment range is from -10000 (highest priority) to 10000 (lowest priority). Nice value changes are not additive, but overwrite any prior nice value and are applied to the job's base priority. Only privileged users can specify a negative adjustment.
- NumNodes=<min_count>[-<max_count>]
- Set the job's minimum and optionally maximum count of nodes to be allocated.
- NumTasks=<count>
- Set the job's count of required tasks to the specified value.
- Partition=<name>
- Set the job's partition to the specified value.
- Priority=<number>
- Set the job's priority to the specified value. Note that a job priority of zero prevents the job from ever being scheduled. By setting a job's priority to zero it is held. Set the priority to a non-zero value to permit it to run. Explicitly setting a job's priority clears any previously set nice value.
- ReqCores=<count>
- Set the job's count of minimum cores per socket to the specified value.
- ReqNodeList=<nodes>
- Set the job's list of required node. Multiple node names may be specified using simple node range expressions (e.g. "lx[10-20]"). Value may be cleared with blank data value, "ReqNodeList=".
- ReqSockets=<count>
- Set the job's count of minimum sockets per node to the specified value.
- ReqThreads=<count>
- Set the job's count of minimum threads per core to the specified value.
- Requeue=<0|1>
- Stipulates whether a job should be requeued after a node failure: 0 for no, 1 for yes.
- ReservationName=<name>
- Set the job's reservation to the specified value.
- Rotate=<yes|no>
- Permit the job's geometry to be rotated. Possible values are "YES" and "NO".
- Shared=<yes|no>
- Set the job's ability to share nodes with other jobs. Possible values are "YES" and "NO".
- StartTime=<time_spec>
- Set the job's earliest initiation time. It accepts times of the form HH:MM:SS to run a job at a specific time of day (seconds are optional). (If that time is already past, the next day is assumed.) You may also specify midnight, noon, or teatime (4pm) and you can have a time-of-day suffixed with AM or PM for running in the morning or the evening. You can also say what day the job will be run, by specifying a date of the form MMDDYY or MM/DD/YY or MM.DD.YY, or a date and time as YYYY-MM-DD[THH:MM[:SS]]. You can also give times like now + count time-units, where the time-units can be minutes, hours, days, or weeks and you can tell SLURM to run the job today with the keyword today and to run the job tomorrow with the keyword tomorrow.
Notes on date/time specifications:
- although the 'seconds' field of the HH:MM:SS time specification is allowed by the code, note that the poll time of the SLURM scheduler is not precise enough to guarantee dispatch of the job on the exact second. The job will be eligible to start on the next poll following the specified time. The exact poll interval depends on the SLURM scheduler (e.g., 60 seconds with the default sched/builtin).
- if no time (HH:MM:SS) is specified, the default is (00:00:00).
- if a date is specified without a year (e.g., MM/DD) then the current year is assumed, unless the combination of MM/DD and HH:MM:SS has already passed for that year, in which case the next year is used.
- TimeLimit=<time>
- The job's time limit. Output format is [days-]hours:minutes:seconds or "UNLIMITED". Input format (for update command) set is minutes, minutes:seconds, hours:minutes:seconds, days-hours, days-hours:minutes or days-hours:minutes:seconds. Time resolution is one minute and second values are rounded up to the next minute.
- WCKey=<key>
- Set the job's workload characterization key to the specified value.
- NOTE: The "show" command, when used with the "job" or "job <jobid>"
- entity displays detailed information about a job or jobs. Much of this information may be modified using the "update job" command as described above. However, the following fields displayed by the show job command are read-only and cannot be modified:
- AllocNode:Sid
- Local node and system id making the resource allocation.
- EndTime
- The time the job is expected to terminate based on the job's time limit. When the job ends sooner, this field will be updated with the actual end time.
- ExitCode=<exit>:<sig>
- Exit status reported for the job by the wait() function. The first number is the exit code, typically as set by the exit() function. The second number of the signal that caused the process to terminate if it was terminated by a signal.
- JobState
- The current state of the job.
- NodeList
- The list of nodes allocated to the job.
- NodeListIndices
- The NodeIndices expose the internal indices into the node table associated with the node(s) allocated to the job.
- PreSusTime
- Time the job ran prior to last suspend.
- Reason
- The reason job is not running: e.g., waiting "Resources".
- SuspendTime
- Time the job was last suspended or resumed.
- UserId GroupId
- The user and group under which the job was submitted.
- NOTE on information displayed for various job states:
- When you submit a request for the "show job" function the scontrol process makes an RPC request call to slurmctld with a REQUEST_JOB_INFO message type. If the state of the job is PENDING, then it returns some detail information such as: min_nodes, min_procs, cpus_per_task, etc. If the state is other than PENDING the code assumes that it is in a further state such as RUNNING, COMPLETE, etc. In these cases the code explicitly returns zero for these values. These values are meaningless once the job resources have been allocated and the job has started.
- SPECIFICATIONS FOR UPDATE COMMAND, NODES
- NodeName=<name>
- Identify the node(s) to be updated. Multiple node names may be specified using simple node range expressions (e.g. "lx[10-20]"). This specification is required.
- Features=<features>
- Identify feature(s) to be associated with the specified node. Any previously defined feature(s) will be overwritten with the new value. NOTE: Features assigned via scontrol do not survive the restart of the slurmctld nor will they survive scontrol reconfigure if Features are defined in slurm.conf. Update slurm.conf with any changes meant to be persistent.
- Reason=<reason>
- Identify the reason the node is in a "DOWN" or "DRAINED", "DRAINING", "FAILING" or "FAIL" state. Use quotes to enclose a reason having more than one word.
- State=<state>
- Identify the state to be assigned to the node. Possible values are "NoResp", "ALLOC", "ALLOCATED", "DOWN", "DRAIN", "FAIL", "FAILING", "IDLE", "MIXED", "MAINT", "POWER_DOWN", "POWER_UP", or "RESUME". If a node is in a "MIXED" state it usually means the node is in multiple states. For instance if only part of the node is "ALLOCATED" and the rest of the node is "IDLE" the state will be "MIXED". If you want to remove a node from service, you typically want to set it's state to "DRAIN". "FAILING" is similar to "DRAIN" except that some applications will seek to relinquish those nodes before the job completes. "RESUME" is not an actual node state, but will return a "DRAINED", "DRAINING", or "DOWN" node to service, either "IDLE" or "ALLOCATED" state as appropriate. Setting a node "DOWN" will cause all running and suspended jobs on that node to be terminated. "POWER_DOWN" and "POWER_UP" will use the configured SuspendProg and ResumeProg programs to explicitly place a node in or out of a power saving mode. The "NoResp" state will only set the "NoResp" flag for a node without changing its underlying state. While all of the above states are valid, some of them are not valid new node states given their prior state. Generally only "DRAIN", "FAIL" and "RESUME" should be used.
- Weight=<weight>
- Identify weight to be associated with specified nodes. This allows dynamic changes to weight associated with nodes, which will be used for the subsequent node allocation decisions. Any previously identified weight will be overwritten with the new value.NOTE: The Weight associated with nodes will be reset to the values specified in slurm.conf (if any) upon slurmctld restart or reconfiguration. Update slurm.conf with any changes meant to be persistent.
- SPECIFICATIONS FOR CREATE, UPDATE, AND DELETE COMMANDS, PARTITIONS
- AllowGroups=<name>
- Identify the user groups which may use this partition. Multiple groups may be specified in a comma separated list. To permit all groups to use the partition specify "AllowGroups=ALL".
- AllocNodes=<name>
- Comma separated list of nodes from which users can execute jobs in the partition. Node names may be specified using the node range expression syntax described above. The default value is "ALL".
- Default=<yes|no>
- Specify if this partition is to be used by jobs which do not explicitly identify a partition to use. Possible output values are "YES" and "NO". In order to change the default partition of a running system, use the scontrol update command and set Default=yes for the partition that you want to become the new default.
- DefaultTime=<time>
- Run time limit used for jobs that don't specify a value. If not set then MaxTime will be used. Format is the same as for MaxTime.
- Hidden=<yes|no>
- Specify if the partition and its jobs should be hidden from view. Hidden partitions will by default not be reported by SLURM APIs or commands. Possible values are "YES" and "NO".
- MaxNodes=<count>
- Set the maximum number of nodes which will be allocated to any single job in the partition. Specify a number, "INFINITE" or "UNLIMITED". (On a Bluegene type system this represents a c-node count.)
- MaxTime=<time>
- The maximum run time for jobs. Output format is [days-]hours:minutes:seconds or "UNLIMITED". Input format (for update command) is minutes, minutes:seconds, hours:minutes:seconds, days-hours, days-hours:minutes or days-hours:minutes:seconds. Time resolution is one minute and second values are rounded up to the next minute.
- MinNodes=<count>
- Set the minimum number of nodes which will be allocated to any single job in the partition. (On a Bluegene type system this represents a c-node count.)
- Nodes=<name>
- Identify the node(s) to be associated with this partition. Multiple node names may be specified using simple node range expressions (e.g. "lx[10-20]"). Note that jobs may only be associated with one partition at any time. Specify a blank data value to remove all nodes from a partition: "Nodes=".
- PartitionName=<name>
- Identify the partition to be updated. This specification is required.
- Priority=<count>
- Jobs submitted to a higher priority partition will be dispatched before pending jobs in lower priority partitions and if possible they will preempt running jobs from lower priority partitions. Note that a partition's priority takes precedence over a job's priority. The value may not exceed 65533.
- RootOnly=<yes|no>
- Specify if only allocation requests initiated by user root will be satisfied. This can be used to restrict control of the partition to some meta-scheduler. Possible values are "YES" and "NO".
- Shared=<yes|no|exclusive|force>[:<job_count>]
- Specify if nodes in this partition can be shared by multiple jobs. Possible values are "YES", "NO", "EXCLUSIVE" and "FORCE". An optional job count specifies how many jobs can be allocated to use each resource.
- State=<up|down>
- Specify if jobs can be allocated nodes in this partition. Possible values are"UP" and "DOWN". If a partition allocated nodes to running jobs, those jobs will continue execution even after the partition's state is set to "DOWN". The jobs must be explicitly canceled to force their termination.
- SPECIFICATIONS FOR CREATE, UPDATE, AND DELETE COMMANDS, RESERVATIONS
- Reservation=<name>
- Identify the name of the reservation to be created, updated, or deleted. This parameter is required for update and is the only parameter for delete. For create, if you do not want to give a reservation name, use "scontrol create res ..." and a name will be created automatically.
- Licenses=<license>
- Specification of licenses (or other resources available on all nodes of the cluster) which are to be reserved. License names can be followed by an asterisk and count (the default count is one). Multiple license names should be comma separated (e.g. "Licenses=foo*4,bar").
- NodeCnt=<num>
- Identify number of nodes to be reserved. A new reservation must specify either NodeCnt or Nodes.
- Nodes=<name>
- Identify the node(s) to be reserved. Multiple node names may be specified using simple node range expressions (e.g. "Nodes=lx[10-20]"). Specify a blank data value to remove all nodes from a reservation: "Nodes=". A new reservation must specify either NodeCnt or Nodes.
- StartTime=<time_spec>
- The start time for the reservation. A new reservation must specify a start time. It accepts times of the form HH:MM:SS for a specific time of day (seconds are optional). (If that time is already past, the next day is assumed.) You may also specify midnight, noon, or teatime (4pm) and you can have a time-of-day suffixed with AM or PM for running in the morning or the evening. You can also say what day the job will be run, by specifying a date of the form MMDDYY or MM/DD/YY or MM.DD.YY, or a date and time as YYYY-MM-DD[THH:MM[:SS]]. You can also give times like now + count time-units, where the time-units can be minutes, hours, days, or weeks and you can tell SLURM to run the job today with the keyword today and to run the job tomorrow with the keyword tomorrow.
- EndTime=<time_spec>
- The end time for the reservation. A new reservation must specify an end time or a duration. Valid formats are the same as for StartTime.
- Duration=<time>
- The length of a reservation. A new reservation must specify an end time or a duration. Valid formats are minutes, minutes:seconds, hours:minutes:seconds, days-hours, days-hours:minutes, days-hours:minutes:seconds, or UNLIMITED. Time resolution is one minute and second values are rounded up to the next minute.
- PartitionName=<name>
- Identify the partition to be reserved.
- Flags=<flags>
- Flags associated with the reservation. In order to remove a flag with the update option, preceed the name with a minus sign. For example: Flags=-DAILY (NOTE: this option is not supported for all flags). Currently supported flags include:
-
- MAINT
- Maintenance mode, receives special accounting treatment. This partition is permitted to use resources that are already in another reservation.
- OVERLAP
- This reservation can be allocated resources that are already in another reservation.
- IGNORE_JOBS
- Ignore currently running jobs when creating the reservation. This can be especially useful when reserving all nodes in the system for maintenance.
- DAILY
- Repeat the reservation at the same time every day
- WEEKLY
- Repeat the reservation at the same time every week
- SPEC_NODES
- Reservation is for specific nodes (output only)
-
- Features=<features>
- Set the reservation's required node features. Multiple values may be "&" separated if all features are required (AND operation) or separated by "|" if any of the specified features are required (OR operation). Value may be cleared with blank data value, "Features=".
- Users=<user list>
- List of users permitted to use the reserved nodes. E.g. Users=jones1,smith2. A new reservation must specify Users and/or Accounts.
- Accounts=<account list>
- List of accounts permitted to use the reserved nodes. E.g. Accounts=physcode1,physcode2. A user in any of the accounts may use the reserved nodes. A new reservation must specify Users and/or Accounts.
- SPECIFICATIONS FOR UPDATE, BLOCK
- Bluegene systems only!
- BlockName=<name>
- Identify the bluegene block to be updated. This specification is required.
- State=<free|error|remove>
- This will update the state of a bluegene block to either FREE or ERROR. (i.e. update BlockName=RMP0 STATE=ERROR) State error will not allow jobs to run on the block. WARNING!!!! This will cancel any running job on the block! On dynamically laid out systems REMOVE will free and remove the block from the system. If the block is smaller than a midplane every block on that midplane will be removed.
- SubBPName=<name>
- Identify the bluegene ionodes to be updated (i.e. bg000[0-3]). This specification is required.
ENVIRONMENT VARIABLES
Some scontrol options may be set via environment variables. These environment variables, along with their corresponding options, are listed below. (Note: Commandline options will always override these settings.)
- SCONTROL_ALL
- -a, --all
- SLURM_CONF
- The location of the SLURM configuration file.
EXAMPLES
# scontrol
scontrol: show part debug
PartitionName=debug
AllocNodes=ALL AllowGroups=ALL Default=YES
DefaultTime=NONE DisableRootJobs=NO Hidden=NO
MaxNodes=UNLIMITED MaxTime=UNLIMITED MinNodes=1
Nodes=snowflake[0-48]
Priority=1 RootOnly=NO Shared=YES:4
State=UP TotalCPUs=694 TotalNodes=49
scontrol: update PartitionName=debug MaxTime=60:00 MaxNodes=4
scontrol: show job 71701
JobId=71701 Name=hostname
UserId=da(1000) GroupId=da(1000)
Priority=66264 Account=none QOS=normal WCKey=*123
JobState=COMPLETED Reason=None Dependency=(null)
TimeLimit=UNLIMITED Requeue=1 Restarts=0 BatchFlag=0 ExitCode=0:0
SubmitTime=2010-01-05T10:58:40 EligibleTime=2010-01-05T10:58:40
StartTime=2010-01-05T10:58:40 EndTime=2010-01-05T10:58:40
SuspendTime=None SecsPreSuspend=0
Partition=debug AllocNode:Sid=snowflake:4702
ReqNodeList=(null) ExcNodeList=(null)
NodeList=snowflake0
NumNodes=1 NumCPUs=10 CPUs/Task=2 ReqS:C:T=1:1:1
MinCPUsNode=2 MinMemoryNode=0 MinTmpDiskNode=0
Features=(null) Reservation=(null)
Shared=OK Contiguous=0 Licenses=(null) Network=(null)
scontrol: update JobId=71701 TimeLimit=30:00 Priority=500
scontrol: show hostnames tux[1-3]
tux1
tux2
tux3
scontrol: create res StartTime=2009-04-01T08:00:00 Duration=5:00:00 Users=dbremer NodeCnt=10
Reservation created: dbremer_1
scontrol: update Reservation=dbremer_1 Flags=Maint NodeCnt=20
scontrol: delete Reservation=dbremer_1
scontrol: quit
COPYING
Copyright (C) 2002-2007 The Regents of the University of California. Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER). CODE-OCEC-09-009. All rights reserved.This file is part of SLURM, a resource management program. For details, see <https://computing.llnl.gov/linux/slurm/>.
SLURM is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
SLURM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
FILES
/etc/slurm.conf
SEE ALSO
scancel(1), sinfo(1), squeue(1), slurm_checkpoint(3), slurm_create_partition(3), slurm_delete_partition(3), slurm_load_ctl_conf(3), slurm_load_jobs(3), slurm_load_node(3), slurm_load_partitions(3), slurm_reconfigure(3), slurm_requeue(3), slurm_resume(3), slurm_shutdown(3), slurm_suspend(3), slurm_takeover(3), slurm_update_job(3), slurm_update_node(3), slurm_update_partition(3), slurm.conf(5), slurmctld(8)Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre