Rechercher une page de manuel

Chercher une autre page de manuel:

tv_grab_na_dd

Langue: en

Autres versions - même langue

Version: 2008-02-18 (mandriva - 01/05/08)

Section: 1 (Commandes utilisateur)

NAME

tv_grab_na_dd - Grab TV listings for North America using Schedules Direct http://www.schedulesdirect.org

SYNOPSIS

     tv_grab_na_dd --help
 
     tv_grab_na_dd --version
 
     tv_grab_na_dd --capabilities
 
     tv_grab_na_dd --configure [--config-file FILE] [--dd-data FILE]
                               [--reprocess] [--auto-config add|ignore]
                               [--gui OPTION]
 
     tv_grab_na_dd --list-lineups [--config-file FILE] [--dd-data FILE]
                                  [--reprocess]
 
     tv_grab_na_dd [--config-file FILE] [--dd-data FILE]
                   [--reprocess] [--auto-config add|ignore]
                   [--days N] [--offset N] [--quiet] [--notrim]
                   [--old-chan-id] [--low-mem] [--output FILE]
                   [--list-channel] [--share SHAREDIR] [--list-times]
                   [--download-only] [--padd n] [--dropbadchar]
 
 

DESCRIPTION

This script downloads TV listings using Schedules Direct's data service, converts it to XMLTV format, and outputs the results.

You must first register with Schedules Direct at: <http://www.schedulesdirect.org>

Schedules Direct is a non-profit organization whose mission is to provide low-cost television program guide data to end-users of Open Source and Freeware applications.

The raw data source is Tribune Media Service's Data Direct Service, which is very similar to the free Zap2IT Labs service Tribune previously offerred.

While the service is not available for free, Schedules Direct strives to keep costs as low as possible.

First you must become a member at the <http://www.schedulesdirect.org> site.

Next, you use that website to add lineup(s) to your account.

Next, you execute "tv_grab_na_dd --configure" to set up the grabber.

Finally, you execute tv_grab_na_dd with no arguments and it will output listings in XML format to standard output. See below for other options.

Stand-alone options

--help
Print a help message and exit.
--version
Show the version of the grabber.
--capabilities
Show which capabilities the grabber supports. For more information, see <http://xmltv.org/wiki/xmltvcapabilities.html>

Mode selection (default is grab mode)

--configure
Activates configure mode. If a config file already exists the values are used as defaults.
--gui OPTION
Use this option to enable a graphical interface to be used. OPTION may be 'Tk', or left blank for the best available choice. Additional allowed values of OPTION are 'Term' for normal terminal output (default) and 'TermNoProgressBar' to disable the use of Term::ProgressBar.
--list-lineups
Lists available lineups. Only requires username in the config file. Used by programs that automate the ``--configure'' process.

General Options

--config-file file
Set the name of the configuration file, the default is ~/.xmltv/tv_grab_na_dd.conf. This is the file created during ``--configure'' mode.
--dd-data file
Store raw Data Direct data to this file. (default is a temporary file)
--reprocess
Don't get data from Data Direct, but reprocess a file saved with --dd-data.
--auto-config add|ignore
When used in --configure mode, updates the config file, removing old channels, and adding or ignoring new channels. Prompts are skipped if defaults are available in the current config file.

When used in grab mode, appends new channels to the config file.

Grabber Mode options

--days n
Grab n days. The default is 7.
--offset n
Start N days after the default.
--quiet
Suppress some messages normally written to standard error.
--notrim
Data Direct includes shows in progress at the start time. The default behavior is to filter these shows out so data can be cleanly split between days. This option turns off that filter so you get shows in progress a tthe start time.
--old-chan-id
Use a channel id similar to the one used by the old tv_grab_na grabber.
--low-mem
Omit all but the most basic program information. Reduces memory usage.
--output file
Write xml to file rather than standard output.
--list-channel
Same as --days 0
--share SHAREDIR
tv_grab_na_icons stores icons in SHAREDIR/icons. The share directory is set at install time, but there may be times when it needs to be specified. (for example: no write access to the default share directory)
--list-times
Report to STDERR the Schedules Direct blockedTime (not currently enforced) and suggestedTime values to assist automated processes with scheduling.
--download-only
Don't generate any output, just fetch the data. Personally I don't see the point, but it was requested and easy to add.
--padd n
Add <n> spaces to the front of the start date. This is normally not needed, but can be helpful in working around a Tribune problem when the request packet spans TCP packets. Recommended initial value is ``20''. This is only needed if you get ``invalid start time'' messages. If this helps, please post results to the list.
--dropbadchar
DD data is supposed to be in UTF-8 format. Sometimes DD sends bad characters which cause a ``Bad XML from DD'' error. This option causes those bad characters to be deleted.

Automating configuration

Sometimes applications want to call tv_grab_na_dd as a standalone application, but automate the configure process. The best way is to hook in to the XMLTV::Ask module, but if that's not available, here is a solution.
Step1. Application creates config file with username (and optionally password).
Step2. "tv_grab_na_dd --dd-data lineups.xml --list-lineups"
Step3. Application adds desired lineup to config file.
Step4. "tv_grab_na_dd --dd-data lineups.xml --reprocess --auto-config add --list-channels"
Step5. Application edits config file as needed, and deletes lineups.xml.

Grabber Timing

Data Direct offers a ``suggested download time'' that can be retrieved with the ``--list-times'' option. Its use is encouraged.

Handling Multiple Linups

tv_grab_na_dd only outputs a single lineup. If your Schedules Direct account has multiple lineups, they are all downloaded even though only one is output.

To process multiple lineups, use separate --config-file. Separate config files are also handy if you need different channel sets for a lineup (common with MythTV). To prevent re-downloading the data on subsequent passes, the ``--reprocess'' option is recommended.

Here's an example: (the = sign is optional, but helps readability)

  tv_grab_na_dd --config-file=lineup1.dat --output=lineup1.xml --dd-data=dd.xml
  tv_grab_na_dd --config-file=lineup2.dat --output=lineup2.xml --dd-data=dd.xml --reprocess
  tv_grab_na_dd --config-file=lineup3.dat --output=lineup3.xml --dd-data=dd.xml --reprocess
 
 

Each config file specifies the desired lineup and channel list.

If you want to merge the lineups into a single file, you can use tv_cat

  tv_cat lineup1.xml lineup2.xml lineup3.xml >guide.xml
 
 

Non-US/Canada listings. fake postal codes.

TMS's Data direct service proivdes listings for a few non US/Canada locations. These are accessed with ``fake'' postal codes. The following are available:
     147BERM Bermuda Cablevision
     366HAMI Hamilton, Bermuda Wow World on Wireless
     101VENE DirecTV Latin America
     904MEXI Mexico #1
     954MEXI Mexico #2
     512TRIN Trinidad Express
     782YOKO Yokota AFB, Japan. Americable International
 
 

For a more complete list, check the Schedules Direct FAQ

tv_grab_na_dd checks for channel icons in a directory share/icons. The share directory is usually set during the install. For windows exe users, it defaults to the location where xmltv.exe is. tv_grab_na_icons is available to download the icons.

Notes on channel lists

Channel lists can be configured both at the Schedules Direct website and through the grabber. This is done to allow multiple config files with different channel lists as Schedules Direct only supports a single channel map per lineup.

Similarly, tv_grab_na_dd only supports a single channel mapping for a station. If multiple mappings are detected, only the first one is used and you are advised to adjust your Schedules Direct lineup.

Notes on episode numbers

Three episode-num formats are supplied (when available)
xmltv_ns
always "..a/b" for part "a" of "b". First two xmltv_ns fields always blank.
dd_progid
TMS generated "a.b.c/d" where "a" is a unique program id, "b" is a unique episode id, "c/d" is part "c" of "d" similar to xmltv_ns.
onscreen
Distributor-designated number corresponding to an episode of a specific show. Varies by distributor.

Notes on passwords

If a password is stored in the config file, the config file should be properly protected. Instead of storing the password in the config file, it can be omitted, and will be prompted for.

Notes on lineup changes

Data Direct currently adds a channel to your lineup automatically when it is available. When tv_grab_na_dd sees the new channel in the Schedules Direct lineup, it prints a message (and potentially adds or ignores it based on --auto-config).

If you are sensitive to bandwidth issues, I would set --auto-config ignore and periodically check your --config-file for ignored channels and remove from your Schedules Direct lineup.

Notes on previously-shown

Previous releases of tv_grab_na_dd set XMLTV's ``date'' field for DD ``original-air-date'' field. The correct place for the data is ``previously-shown->start'' The OAD is in both places temporarily for compatability reasons.

DD has dropped the ``repeat'' flag and replaced it with a ``new'' flag. Now we set "previously-shown

Known issues

none!

SEE ALSO

xmltv(5).

Author

Author/Maintainer: Robert Eden, rmeden@yahoo.com

Contributors:

Ed Avis, ed@membled.com
Don Huettl, drh@huettl.net
Matti Airas, mairas@iki.fi (I used tv_grab_fi as a template)
and of course everyone else I forgot to mention. :)
Faites-vous des amis prompts à vous censurer.
-+- Nicolas Boileau, Satires -+-